Question about NewSoft Presto! Mr. Photo 3

Open Question

Cantinstall Mr Presto Photo 3

I have installed all the components of Mr Photo V 6.2 from the disc but the photo installationwill not install.
Tells me MSG_OS was not found in string table.
I have previously installed and used successfullly this product when i had another computer which was windows xp serv 2 pack but now have new computer and its a Windows Vista 32 bit.
Its also asking me to go to set associations in the control panel and I have no idea on this or how to set it.
I would appreciate any help you can give me and i also have posted my queston in the forum as I have noticed someone else has the same problem.
Thanks
Kiwioz

Posted by on

  • 1 more comment 
  • peteej Jan 31, 2009

    When installing DXG files everything goes OK till i get to mr.photo3 install .I get an error message "String MSG_OS was not found in the string table", please Help US !!!

  • Anonymous Feb 05, 2009

    d same pro

  • Anonymous Mar 20, 2009

    Trying to download "NewSoft" Presto Image Folio ( Presto Mr. Photo disc, previously used on old computer with Windows XP but now having to load onto new machine with vista) message comes up - String MSG_OS in string table not found

×

1 Suggested Answer

jas247
  • 844 Answers

SOURCE: When installing NewSoft Mr Photo

Welcome to FixYa.

1. If you got the software by downloading it from the internet, download it again. The installer might have been corrupted during the download process.

2. Disable your anti-virus and its firewall completely.

3. Restart the computer in Clean Mode: The Clean Mode temporarily disables all the programs that are being loaded during the startup of your computer.

  • Click Start.
  • Type msconfig in the search box.
  • Click on msconfig from the results.
  • System Configuration Window will open.
  • Click the Services tab.
  • Check the box that says Hide all Microsoft services on the lower left corner of the window.
  • Uncheck all the boxes in the list.
  • Click the Startup tab.
  • Uncheck all the boxes in the list.
  • Click on the Apply button.
  • Click the OK button.
  • You will be prompted to Restart.
  • Click Restart.
  • The computer will restart.

Try installing again the software.

Thank you for using FixYa. Have a great day.

Posted on Jun 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hum mr photo download karna chate hain lekin download nahin ho raha hai


app ka net speed slow hoga mozila firefox pay try karna...

Jun 10, 2011 | NewSoft Presto! Mr. Photo 3

1 Answer

Problem loading photo explosion delux version 3 disc 1


You can right-click on the program's setup.exe, select properties, then compatibility and set it to windows XP
then try to install it again

Dec 15, 2007 | Nova Development Photo Explosion Deluxe...

2 Answers

How do I remove a tumbnail from a photo?


Once you've added you're photos, you can set a different photo to act as thumbnail (the programme automatically chooses the first photo/slide, indicated by a little green ticked box sign).
To change the thumbnail to a different photo, highlight the photo you want as thumbnail by clicking it - the frame will change to yellow - and then click on the green ticked box command ("Set Thumbnail") at the top of the window.
You cannot alltogether delete the thumbnail, because every slide show you create needs to have a thumbnail to link the slide show to the menu screen at the start of your DVD. So, on your menu screen there will always be at least one thumbnail. (The black thumbnail that appears in the middle of your screen when you first open the programme, is a "place holder". It needs to be there and it cannot be deleted. Once you've created a slide show, it will be replaced with the photo you have chosen to be the thumbnail. Every time you create a new slide show, a new thumbnail will be added to your menu screen. The position of thumbnails can be changed, using the second ("Edit") Tab.

You will find a User's Guide on the install disc. It can be accessed by inserting the install disc and clicking on the relevant link, or you can right click on your CD/DVD drive (in "My Computer") and then click on "Explore" to look for it on the install disc - it's a pdf file.

From: 11407336.

Jan 27, 2011 | Individual SlideShow Expressions

1 Answer

MPEG VIO Driver Error photo explosion special edition 3.0


How to correct a Load MPEG VIO Driver Error in Windows Vista.

If you are experiencing this issue with Windows Vista, please follow these directions:

Note: These steps are only for Windows Vista. If you are experiencing the problem on Windows XP, please see the directions found here: KB Article 1469

1. Uninstall Photo Explosion 3.0.
2. Reinstall Photo Explosion 3.0.
3. Restart the computer.
4. Download the Vista update for Photo Explosion 3.0 from the following link:

http://www.novadevelopment.com/Support/Updates.aspx

Note: Please make sure you download the correct one for your version of Photo Explosion 3.0. If you have the Deluxe version, download the Deluxe update. If you have the regular version, download the non-Deluxe update.
5. Save the update to an easily accessible location, such as your Desktop.
6. Once downloaded, go to where the update was saved and double-click the update.
7. After installing the update, you should no longer experience this problem.

Note: It is extremely important that you do not run Photo Explosion until you have restarted the computer and installed the update. If you run the program before installing the update, you will need to start the steps over from the beginning.

This comes directly from the Nova FAQs. Hope this helps!

Jun 30, 2010 | Nova Development Photo Explosion Deluxe...

1 Answer

Hallo, I have Plustek OptiPro ST64 Scanner and Presto! PageManager 6.00 software. But I have Vista and I cannot use the scanner. What can I do?


more than likely you need to download a driver for your scanner for your version of vista. Go to the link below and select your scanner and OS and download the driver. Install the driver and restart your pc. Let me know if this fixes the problem

Jan 30, 2010 | NewSoft Presto! Mr. Photo 3

1 Answer

I need help to install Photo explosion 3


Rather than pay you for assistance, I have decided to return this item.

Jun 12, 2009 | Nova Development Photo Explosion Deluxe...

1 Answer

Webcam installation


Check these stuffs:
1. At first check your USB or cable, maybe these are wrong. check by other ports.
2. Be sure that you install cam driver on your OS, if you did not, you can search your driver in google an dyou should find it easily. Install it and enjoy it!
3. Be sure that if your webcam damaged or not!

Feb 06, 2009 | NewSoft Presto! Mr. Photo 3

1 Answer

Error msg 1335


Please try this. It worked for me. If you are on Windows XP, this can normally be resolved by setting the compatibility mode for Photo Explosion to Windows 98. You can do this by following these steps:

1) Click on the Start button.
2) Click on the My Computer. This should open a window titled My Computer.
3) Double-click on the C: drive.
4) If the information is hidden, there is normally an option to show the hidden files/folders. You will need to select this option.
5) Double-click on the Program Files folder.
6) If the information is hidden, there is normally an option to show the hidden files/folders. You will need to select this option.
7) Double-click on the Nova Development folder.
8) Double-click on the Photo Explosion folder.
9) Right-click on IPE40 icon, which looks like a camera.
10) Select the Properties option from the bottom of the pop-up menu.
11) Click on the Compatibility tab.
12) Put a check in the check-box next to "Run this program in compatibility mode for".
13) From the drop-down list, chose "Windows 98 / Windows Me".
14) Click on the OK button.
15) Reboot your computer.

Jan 12, 2008 | Nova Development Photo Explosion Deluxe...

1 Answer

Installing disc 2-- photo exp deluxe 3


Is E: your CD Disk Drive?
Try changing to the proper Drive letter that the install disk is in.
Go to "My Computer" to find out.

Nov 19, 2007 | Nova Development Photo Explosion Deluxe...

2 Answers

Ipe.exe error at Novatel Photo Explosion Deluxe 2.0


Did you install it from an original disc or download it off the internet? If it is off an original disc, try making a copy of the dic if you have a burner. Now use the copy as the install disc. Unisntall it ands reinstall with backup copy disc. If you downloaded it off the net, the download is corrupted, and you need to uninstall it and download it again. Good luck.

Aug 21, 2007 | Novatel Photo Explosion Deluxe 2.0...

Not finding what you are looking for?
Graphics Publishing, Design & Multimedia Software Logo

Related Topics:

654 people viewed this question

Ask a Question

Usually answered in minutes!

Top NewSoft Graphics Publishing, Design & Multimedia Software Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Cindy Wells

Level 3 Expert

4757 Answers

kakima

Level 3 Expert

96551 Answers

Are you a NewSoft Graphics Publishing, Design and Multimedia Software Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...