Question about Gigabyte GN-WIAG02 (GNWIAG02) 802.11g/b Wireless Adapter

2 Answers

Wirless card for a laptop ?what wire goes to tha main - white or black?

Posted by on

  • mikelc684 Jan 20, 2009

    thanks for your help

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

The white or gray wire goes to MAIN and the black wire goes to AUX. For some reason no one can ever fully answer that question or they close the forum because it is old but when googled these questions still are valid and need to be available even today.

Posted on Apr 07, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

The black wire should go on 1st and the the white one should go on closest to the corner of the board

Posted on Jan 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I use tha linksys wireless-g pci adapter card


The signal types and equipment necessary to pickup the wireless network protocol G (or for that matter A, B, or N) are very different from the signals and equipment that are used to receive tv signals using outdoor antennas. TV signals are very basically instructions telling your TV what to "paint" onto the TV's screen. Wireless Internet protocols use a more complex system to send data, be it text, pictures, programs, or a mixture of all of those types of info. There are signal boosters for Wireless Internet protocols, but they are very different from a coax antenna. Most cities and towns now have free "Hot Spots" that allow people with wireless cards to access the Internet for free. Do a search on Google for Free Hot Spots for your area and see if there are any available.

Mar 11, 2010 | Network & Wireless Adapters

1 Answer

I have a Intel(R) PRO/Wireless 2200BG Network card on my Toshiba Satellite M50. One fine day, it was working fine on the network at home, and then suddenly got disconnected, and soon after stopped being...


I have the same card with Tecra A4. It was working fine with a D-Link 615 wireless router then for no reason it stop working I was able to detect my wirless network but no communication session started between my card and the router. I restrat the router and change the OS fro Linux to XP but still I have the same problem.

At the end I notice that in simple words my card cannot talk at all with the router. So I went to the router wirless settings and change the protocol from:
mixed 802.11 N, mixed 802.11 G, mixed 802.11 B
to only
802.11 G and 802.11B

Then it works fine onb both Linux and XP

Jun 12, 2009 | Intel PRO/Wireless 2200BG 802.11g/b

1 Answer

To reconnect the 2 jumper wires in my Acer internal wifi card.


on the internal wifi card u might find a slot marked as main and auxillary.the white cable goes to the main slot and the black cable goes to the auxillaryu slot,,best of luck

May 13, 2009 | Network & Wireless Adapters

1 Answer

Hi, the problem i have is that i have reinstalled xp prof on my acer travelmate 2410, and now i cannot connect through wireless, can you please help?


How did you connect before? You will need to reinstall the network on the laptop. Make sure drivers for wirless card are installed and it is detecting network.

Dec 26, 2008 | Network & Wireless Adapters

1 Answer

Tiscali wirless connection issue


Sounds like the router may need a firmware update as the DHCP service is failing to run correctly.

You can however just use a static ip address.
First of all find out the network address in use.
eg. 192.168.0.1 - 192.168.1.1 - 192.168.2.1
to find out, - start menu - run - cmd - ok - ipconfig

1. Log on to the client computer as Administrator or as Owner. 2. Click Start, and then click Control Panel. 3. Click Network and Internet Connections. 4. Click Network Connections. 5. Right-click Wireless Network Connection, and then click Properties. 6. Click the General tab, click Internet Protocol (TCP/IP) in the This connection uses the following items list, and then click Properties. 7. In the Internet Protocol (TCP/IP) Properties dialog box, click Obtain an IP address automatically (if it is not already selected), and then click OK.

Note You can also assign a unique static IP address in the range of 192.168.0.2 to 192.168.0.254. For example, you can assign the following static IP address, subnet mask, and default gateway:

IP Address 192.168.0.2
Subnet mask 255.255.255.0
Default gateway 192.168.0.1

Jun 20, 2008 | Linksys WPC54G Wireless-G Notebook Adapter...

1 Answer

Wirless network card


well i think obviously the network card is damaged and causing the pc to stop when checking the pci slot that the card is in. Return to the supplier as the card should light up orange or green when operating normally, and under warranty if Os has a 12 month warranty period. Assuming you haven't had a power surge, they should replace the card.

Sep 24, 2007 | Belkin (F5D7000) 802.11g/b Wireless...

Not finding what you are looking for?
Gigabyte GN-WIAG02 (GNWIAG02) 802.11g/b Wireless Adapter Logo

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gigabyte Network & Wireless Adapters Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Justin
Justin

Level 3 Expert

2072 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Gigabyte Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...