Question about RCA RCR311B Remote Control

1 Answer

Universal rca 311 remote works on the sanyo tv but i cant get the input button to work so i cant swith the video source to watch dvd?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The keypad has a insert under it with the back side has what appears to be a group of black buttons attached to it. Remove battery and open your remote. Clean this buttons with clean cloth and alcohol. Also clean the circuit pad with which these buttons come into contact. This should fix your problem

Posted on Jan 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant figure out how to put the tv on video 1


With the remote in TV mode, the input button on the remote should change the source (TV, AV1, etc. depending on the TV).

If the input button doesn't work, try a different code for your TV manufacturer. A code that controls the basic functions of the remote may not control the full set of functions of the TV. For some TVs, you can change the source from within the Menu. (It depends on the TV. I didn't notice if there was a Menu button that will open the TV menu on the RCA RCU600M.)

If none of the codes work, check if your TV has a Source or Input button on the unit. See if that button works.

If you have a different remote, please indicate the model.

I hope this helps.

Cindy Wells

Oct 13, 2011 | RCA RCU600M Remote Control

1 Answer

Auxillary channel for dvd


You need to determine what output options your DVD player has. Take a look at the rear of the player. It will certainly have RCA jacks for video and audio outputs (yellow for video, red and white for right and left channel audio). It may also have RCA jacks for component video (marked Y, Pb and Pr). Finally, it may have a threaded connector marked "out to TV" or "antenna out" or something similar. This is called RF output.

Most players today don't offer RF output because nearly every TV has direct AV inputs available. If your DVD player has RF output, connect the output connector to the TVs antenna input. You need a coaxial cable with F-connectors on the ends. One may have been supplied with the player. RF output is on channel 3 or 4, set by a switch on the back of the player or by its on-screen setup. Just set the TV to that channel to watch a DVD.

If your player doesn't have RF output, you connect it to the TV using the AV jacks. You need cables with RCA plugs to to connect the video and audio from the player to the TV. Then you switch the TV to its video input to watch the DVD.

This is where you might run into problems. Many TVs need the original remote control to switch inputs. (Some older RCA sets used channels 90, 91 and 92 to switch to their video inputs so any remote would work, but these sets were made before 125-channel tuning became standard. If your set is one of those models, those are the auxiliary channels you heard about.) If you can't switch the set to video input with front panel buttons and you don't have the right remote, you're not completely out of luck.

If you can't use your set's AV inputs or it just doesn't have any, you need an RF converter. These cost around $15. They take the audio and video from the DVD player and convert it to channel 3 or 4. Then you hook that output to your TV as described above.

May 17, 2009 | RCA Universal Remote Control

1 Answer

Unable to get remote to switch to tv/video RCA remote tv is sanyo


It took me forever to figure it out. Press the input key, just below the 9. The TV channel should be on 3. Make sure you put your DVD in and press play manually, so you can see that it is on.

Hope that helps

Apr 03, 2009 | RCA 3-Device Universal Remote with...

1 Answer

Switching to play video games--how do I do it?


You are going to have to order a origanal remote that came with the TV to do this because the universal remote does not have the game mode feature! Go to www.remotes.com to order yours!
Please rate my answer and help keep this site FREE!
Thank You!

Jan 02, 2009 | RCA Universal Remote Control

1 Answer

Input button on my new universal remote doesnt work


You'll have to try a new code for your TV.

http://66.77.167.109/rcaaccessories/RcaaccessoriesController.do?ACTION_TYPE_ID=ACTION_TYPE_CATEGORY&ACTION_CATEGORY_ID=STR_CATEGORY_UNIVERSAL_REMOTES

Click the remote code finder link on the left towards the bottom of the page.

Select your remote and device (TV in this case) from the dropdowns.

Scroll down the results page to your brand of TV and try all the codes until you find the one that works with all the functions you want.

Best of luck!

Dec 21, 2008 | RCA Universal Remote 3 Device Remote...

1 Answer

My new universal remote


Jo have you plugged in the Audio and Video cable in correctly. You need to check that the Video cable is in the corresponding input on the TV

Jun 08, 2008 | RCA Universal Remote Control

3 Answers

RCA RCU-404 UNIVERSAL REOMTE


CyberHome DVD 1024 1023 0816

Mar 02, 2008 | Remote Controls

2 Answers

RCA rcr311w remote won't change tv channel to Video 1 or Video 2 channel


my universal unit won't change the tv channels, everything else works except the channel changing. Does anyone have a solution., The company is only open during the week.

Feb 08, 2008 | RCA RCR311B Remote Control

15 Answers

Sanyo tv codes


The codes listed by Sanyo for my TV won't work in my star Choice remote.
I tried 017 021 039 056 057 058 and 140 as listed by Sanyo.
Any ideas?

Dec 18, 2007 | GE JASRM24912 Remote Control

Not finding what you are looking for?
RCA RCR311B Remote Control Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68352 Answers

andy williard
andy williard

Level 2 Expert

226 Answers

Cindy Wells

Level 3 Expert

4759 Answers

Are you a RCA Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...