Question about Jura Capresso IMPRESSA S9 Coffee Maker
The hose that the coffee travels from to get to the spout has come disconnected. I see where it is attached at the top/front portion of the unit but cannot find where it attaches at the other end
Posted by Anonymous on
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had similar problem, Jura told to open a paper clip and push it up into the four holes on each spout. This worked the first time I had the problem. But now have one side not flowing again and the clip is not helping.
Posted on Aug 29, 2011
Use a pin or a needle on the spout to clean the nozzle head. Most of the time this is due to useing to fine a grind in the machine. You may have to clean the head this way more then one time to get it to start working again properly.If you have any further questions message me back.
Posted on Nov 29, 2011
Tips for a great answer:
Jan 28, 2017 | Jura Capresso Coffee Makers & Espresso...
May 04, 2012 | Jura Capresso Impressa S9 Coffee...
Jan 29, 2012 | Jura Capresso Impressa S9 Coffee...
Jan 08, 2012 | Jura Capresso Impressa S9 Coffee...
Apr 30, 2010 | Jura Capresso Impressa F9 Espresso Machine
Nov 27, 2009 | Jura Capresso Impressa E8 Espresso/Coffee...
23 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 3 Expert
Level 1 Expert
Step 2: Please assign your manual to a product: