Question about Washing Machines

Open Question

Whirlpool Duet E8 F1 - Washing Machines

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
fridgetech
  • 473 Answers

SOURCE: Code F1 @ Whirlpool Duet Sport Washer

An F1 is almost always a defective main control board. Could try unplugging the unit for a few minutes and see if it will reset. The part # for the board is W10110072. Sears sells it for $119.46 http://www.searspartsdirect.com/partsdirect/getSubComp.pd?modelNumber=WFW8300SW01&productCategoryId=0153200&brandId=1198&modelName=RESIDENTIAL-WASHER&diagramPageId=00003&componentDescription=CONTROL%20PANEL%20PARTS&documentId=W0607261&backToLink=Return%20to%20Sub%20Components%20list.

Posted on Dec 12, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the f1 code on whirlpool duet sport mean


think its a thermal fuse code not a hard fix and not expensive

Aug 22, 2014 | Whirlpool Dryers

1 Answer

Whirlpool duet washer has f1 code


Check power cord in washer compartment for broken wire

Oct 27, 2013 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I have a Whirlpool duet front load washer model #WFW8500SR02 ,it stopped before the cycle was done and flashed F1.now i can't get it to do anything.the lights still come on and it clicks like it...


Hello & Welcome to FixYa

F1 error in your whirlpool cabrio indicates bad control and should be replaced to resolve the error code. However, you can contact Whirlpool as well prior to replacing the control yourself as I have seen whirlpool paying for the parts themselves just because this is known to be a common issue. Please get back to me if you have any other questions.

Kevin

Oct 04, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

My front loading washing machine started and then displayed f1, now it will not start at all and when I pushed the start button it beeps three times and does nothing.


Hi,


The "F1" error code on the Whirlpool cabrio is quite common, and generally has to do with the control board. Replacing the control panel may resolve this issue. However, I believe Whirlpool is aware of the F1 issue with the Cabrio, and is fixing some machines for free. Please call 1-800-253-1301 for more details and see if you are eligible for a free repair.


Thank you !!

Aug 13, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

What does the message F1 mean, I have a Whirlpool caprio top loading washing machine


Hi


Thanks for using FixYa. Error F1 means primary control failure and to resolve this you’ll have to replace the machine control assembly. This error should be fixed by whirlpool as its a common issue with whirlpool Cabrio washers, you can call 1-800-253-1301 whirlpool will send a tech. to fix it and pay for the part. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jul 31, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool Cabrio Washer Error message code F1


HELLO, Error code F1 indicates a control failure and most likely the machine control board will have to be replaced. Depending on when you purchased the machine, the board may be covered under extended component warranty.
I had the same F1 problem and they had to replace the control board and something relating to the balance. The tech told me this is a common problem.

Apr 06, 2009 | Whirlpool Duet 3.8 cu. ft. Front Load...

1 Answer

I HAVE A WHIRLPOOL DUET


this is a communication error on the ccu board replace the ccu board

Mar 24, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

F1 code for duet sport


you have a bad machine controller, check the warranty in your use and care guide to see if the part is covered under manufacturer warranty.

Jan 28, 2009 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1466 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Brad Brown

Level 3 Expert

15729 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...