Question about Canon PIXMA iP1600 Printer

2 Answers

Canon Pixma 1500

Hi, I have a printer that has been working fine for months until today. It is still talking to the computer because I'm able to run the utility tests but every time I send something to print it just goes to "Jobs Stopped" I have reinstalled the driver, tried to print from different programs, restarted numerous times, cleared all my printer information and started over. I am at wits end. I feel that it must be something easy because the printer is working and I can send utility tests. Any ideas? Thanks much.

Posted by on

  • Fiona Garriott Jul 31, 2007

    Thanks for the suggestion. The only way to overcome the problem was to go back to an earlier version of the operating system. (Now my smart card reader won't work) For some reason the newest OSX update rendered the Canon driver unusable. I have been advised by Apple to avoid the updates until the next major update. It's good to have my printer working but unfortunately I ended up buying another one before we figured it out.



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What is the solution to above problem?

Posted on Jul 23, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 84 Answers

Plug the cable for the printer into a different USB port and download the newest drivers from the Canon website.

Posted on Jun 29, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My printer was working fine and suddenly when I tried to print a message came up "remove and check cartridges". I did that and continue to get the message. I turned off the printer, unplugged...


Did you make sure they were not expired when installed in the printer?

Still what i can suggest you to do is. Remove the cartridges clean the contact on the cartridges and also in the printer. And turn off the printer. Now turn on the printer and wait for the printer to show error for cartridges and now you can install them back and try,

Jul 19, 2011 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

HP B8850 photo printer originally installed on an XP machine. Now running on a Win 7 unit (SP1) x64. Most printing done from Photoshop CS2. Up until a few months ago, everything ran fine on the x64 Win 7...

Try this.
Right click on the desktop and create a new Text Document, rename it spooler.bat
Be sure your computer is set to display file extensions otherwise you will end up with a file called spooler.bat.txt but the .txt will not be displayed. Right click on the file and select edit. type the following:
net stop spooler
net start spooler

Save the file.
Between print jobs, run this by right clicking on the file and Run as Administrator. Maybe restarting the spooler will work and you will not have to reboot.

Mar 07, 2017 | HP Photosmart Pro B8850 Printer

2 Answers

I have F2110 All-in-One model. I haven't had any

Hi bossermana26
You haven't got scanner software installed.
Click the link below:
  • Select your O/S
  • Download Driver and Software
  • Utility
  • and Update if necessary
Hope this will work for you

Nov 16, 2009 | HP Deskjet F2210 InkJet Printer

1 Answer

Does not allow me to connect to pc/printer


try this, download the software and save it on ur computer and run the software, it would extract the software and  follow the steps below, 
in the RUN window type %temp%,  u would find a folder starting with 7z...... open that, u would find a folder called SETUP open that  then u would fine a folder called UTIL then CCC the u would find a file called UTIL L4,  double click on it and wait until it complete the setup and try once after it completes, restart the computer. 
reinstall the software, it should work.

Regards,  raj_p5983

Jan 18, 2009 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

Canon BJC ink jet printer

May we know what are the things you've tried?

Jul 26, 2008 | Canon BJC 2100 InkJet Printer

1 Answer

Black screen no signal

replace the graphics card, ours was going black here and there the last few months then finally it didn't work at all, we just replaced it today and the new graphics card (ati) works fine.

Jun 07, 2008 | Evga e-GeForce 8600GT, GeForce 8600 GT,...

2 Answers

Cuisinart Coffe Maker has no power

vinegar is not the best thing descaler vinegar remove calciumin little piece that might block thr rest of machine descaler produit melt calcium 1 part solution 1 part water fill the water tank start machine leave it running for few second turn off for 15 minute and repeat untill empty dont forget to rince the machine very good that stuff is very corosif but does the jobs thanks for using fixya pierre

Feb 09, 2008 | Cuisinart DCC-1200 Coffee Maker

3 Answers

Canon zoombrowser Ex downloading problem

Go to the "Add and Remove Programs" in your Control panel.
Do a "Change" and do the 'repair program' utility.
That should fix it, good as new.
If that is not a possible option, try uninstalling. (if there is no "Change" and 'repair program') then Run the normal uninstall program.

Oct 28, 2007 | Canon ES-E1 EOS Link (4593a006) for PC

1 Answer

Keep getting the error "USB device not recognised."

This means that your license has run out. The internet talking kit was not free it had a temporary license and it expired, when you try to reload it, it does not work because a file has been added to your computer that prevents it from working without a vaild license. Now you have some options, use VMware create a virtual machine that shares this hardware without loading the program, ghost the VMware machine and then save this image. Load the USB drivers and the program, use for 3-4 months until the license runs out. when the license runs out use reimage the VMware machine with the ghost image and reload the usb driver and the talking kit program. Yes its a lot of work, or you can just buy the license load it and as they say keep on getting up.

Sep 15, 2007 | Motorola Mobility PC850 Wireless Bluetooth...

Not finding what you are looking for?
Canon PIXMA iP1600 Printer Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts


Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

2061 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides