Question about Grandstream HandyTone 486 ATA (HTATA486)

# HandyTone 486 ATA (HTATA286) - Grandstream HandyTone 486 ATA (HTATA486)

Posted by Anonymous on

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
goodluck!

Posted on Jan 02, 2017

SOURCE: Secret block

Posted on Jul 21, 2010

×

my-video-file.mp4

×

## Related Questions:

### Convert act file to mp3 format

This WEB site has software to convert act files to mp3 file format.

Aug 08, 2011 | Grandstream HandyTone HT-486 Analog /...

### What is base 6 of 486

for converting 486 to the base 10 to base 6 dived 486 by 6 and note the quotients and remainder.

486/6 = quotient = 81 remainder = 0.now divide quotient by 6 and note quotient and remainder.

81/6 = quotient 13 remainder= 3

13/6 = quotient 2 remainder = 1 .

2/6 = quotient 0 remainder= 2.

Hence reading remainder from below we get 2130.

So 486 tot he base 10 is equivalent to 2130 to the base 6.

Thank you.

Jun 25, 2010 | Mathsoft Solving and Optimization...

### My handy tone-486 box keeps flashing red every 3 seconds and I have no dial tone. My internet works and I have power and a working phone line to the box. Help.

Lifted this straight from the manual:

Button flashes every 4 seconds
(if SIP server is configured)
HT–486 fails to register

So basicly, that means your HandyTone 486 ATA fails to register with the SIP-server. That means you either have not recieved your IP-tele yet, or that your ISP have failed to register you.

Mar 04, 2010 | Grandstream HandyTone 486 ATA (HTATA486)

### Reset canon pixma MP 486

saya punya printer canon 486 baru berapa buala sudah minta direseter dimana saya harus dapatkan soft ware resetter nya

Jan 18, 2010 | Canon Office Equipment & Supplies

### A wrong pass word was entered and the devise was blocked.how can i access the device again?

you would need to factory reset the adapter if you dial *** then 02 it will give you ip address now if you put the ip address into your main web browser it will pull up a configuration page for your handy tone you will see a tab on the left hand side that says reset click that and factory reset the device this should wipe out all current configurations on tht device

Oct 07, 2009 | Grandstream HandyTone 486 ATA (HTATA486)

Remove the battery from the mother board.
Jumper the CMOS to discharge it. You may
want to check you Mother Board manual, to
see which jumper it is. Some require you to
turn the Mother Board BACK ON for two seconds. (It will NOT come up, just will
discharge the CMOS and the battery will NOT
be there to replace the energy, so everything
is GONE. You will know if you have done it right, when
you boot up again, the BIOS will NOT recognize the hard disk (need to set it up
again), the date will be wrong (set it up again also) and the floppy drive will not
be recognized (new setup). But then try your password. It should let
you right in then. Let me know if it works. Best Regards, PS Make sure you have the right mother
board jumpers to discharge the CMOS, YOU
CAN DO DAMAGE ALSO, if they are not the
right ones.

Jan 25, 2008 | Grandstream HandyTone 486 ATA (HTATA486)

## Open Questions:

#### Related Topics:

28 people viewed this question

Level 3 Expert

Level 3 Expert