Question about Lexmark E250dn Laser Printer

1 Answer

Lexmark e250dn printer, toner light is flashing, new cartridge

New cartridge installed correctly, yellow toner light continues to flash. have shut off machine and repowered, no effect.

Posted by on

  • 1 more comment 
  • rancher3456 Jan 21, 2009

    I have the same problem and also the paper has blank marks all along the right edge.

    I have tried changing toners, turning on and off.

    Help//

  • rotary_5 Mar 12, 2009

    Our toner light is also flashing and we have black roller marks on the right hand edge also. I printed out the Device Statistics and it indicated the photoconductor supply level is low (close to 0%). The photoconductor is the component that the cartridge is slotted into.



    I've ordered a new photoconductor and I'll let you know if replacing it stops the light blinking and fixes the black marks on the edge of the page.

  • JDTec
    JDTec May 11, 2010


    Do you stll need help with your printer?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 217 Answers

Could be photoconductor at end of life.

You shoul still be able to do a printer test print (press the arrow button).

Look on the printed pagesfor Toner AND Photoconductor.

These show as OK when new or very low count, and 100% when fully used.

If the toner is showing as 100% when you've just replaced it, either the chip is faulty, the wrong one, or if the cartridge is a remanufactured one possibly nor been replaced.

Posted on Mar 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The printer toner light is continuously flashing even after putting in a new cartridge


After installing a new cartridge and the blinking light is on Toner Low, it means that the photoconductor is almost full and should be replaced soon. Press and release the Continue button (green button) to clear the light sequence and continue processing the print job. If the light is still blinking, replace the photoconductor kit.

For further assistance, please call Lexmark Technical Support.

Jun 14, 2011 | Lexmark E260D - QTY 4 - LMB OFFER Laser...

1 Answer

Lexmark e260d printer 4th light orange is continuously flashing. New toner cartridge was installed. Not printing


If the blinking light is on Toner Low (4th light starting from left), press and release the Continue button (green button) to clear the light sequence and continue processing the print job. If the light is still blinking, the photoconductor is almost full and should be replaced.

For further assistance, please contact Lexmark Technical Support

May 13, 2011 | Lexmark E260D - QTY 4 - LMB OFFER Laser...

1 Answer

My Lexmark E250DN : 02 led on the right hand is ON, the system restart and can not print. Any suggestion for help???


The printer is ready to receive and process data. In addition, the toner in the toner cartridge is getting low.


You can press and release Continue button to clear the light sequence and continue processing the print job. Turn the printer off and remove the toner cartridge, and shake it to extend the life. If toner light is on, replace the toner cartridge.


For further assistance, please call Lexmark Technical Support.

Jan 11, 2011 | Lexmark E250dn Laser Printer

1 Answer

My toner cartridge was recently replaced (we use the proper cartridges, not refills) and within about 3 weeks (sooner than last time) the "toner low" light is flashing. The print quality is still perfect....


Whenever you replace the photoconductor kit, you will also need to manually reset the photoconductor page counter. Visit the Lexmark website at http://bit.ly/8YJwFU, for the instructions on how to reset the pc page count. You can also contact Lexmark technical support or your authorized service provider for additional assistance.

Sep 24, 2010 | Lexmark E250dn Laser Printer

1 Answer

I changed the toner on my Lexmark E250dn and now it has the "!" light on all the time and won't print. It's a new cartridge what is going on?


"!" means error.

Try removing cartridge and installing it again and might be one of the cartridge missing.

Try operating manual. Might helps, there are lots of reason for the error
ftp://ftp.lexmark.com/depot/LXK/E250_Depot_Repair_rev092606.pdf

Suspected
Follow the link on dispute about wrong cartridge due "Toner cartridge region mismatch"
http://www.techsupportforum.com/hardware-support/printer-support/379157-lexmark-e250dn-amp-quot-toner-cartridge-region-mismatch-amp-quot.html

Hope this helps
.

May 21, 2010 | Lexmark E250dn Laser Printer

2 Answers

Toner light flashing in printer 330


please you chack your printer fuser unite thermostater is over toner dust clean it i wish you are success

Jul 20, 2009 | Lexmark E330 Laser Printer

1 Answer

Bulb sign light is flashing. Hence printer doesn't print


Well I kept trying to find out the solution as I don't have any user's guide with me and finally I got a hint. I just reinstalled drivers & related software which solved the problem. Printer is new
there cann't be any other type of problem like toner or developer etc. So this is a very positive approach to reinstall the software.

Jan 14, 2009 | Lexmark E250dn Laser Printer

1 Answer

Lexmark E250d


I had the same problem today with my printer. All of a sudden, the first and fourth light lit up. I contacted Lexmark and they said my toner cartrigde needed to be replaced.
The problem is caused by the little chip under the cartridge. I replaced the chip with an old one I had on another cartridge and I got the printer to work again.
You can buy a replacement chip from Lexmark or from a jobber selling replacement cartridge or toner refills.
Hope that helps.

Sep 30, 2008 | Lexmark E250dn Laser Printer

3 Answers

I have a lexmark e250dn printer. Today the printer has stopped working. The help ! indicator on the printer is an orange color as well as the toner/and drum indicator is an orange color.The ready indicator...


Here is how to reset the photoconductor kit counter:

1. Make sure the new kit is installed and the printer is turned ON.

2. Open the front panel.

3. Hold the Cancel button in until the front panel LEDs flash.

4. Close the front panel

May 25, 2008 | Lexmark Office Equipment & Supplies

Not finding what you are looking for?
Lexmark E250dn Laser Printer Logo

1,576 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...