Question about ASUS K61ICA2 Notebook

Open Question

I have a problem with my laptop.

My laptop runs Ubuntu 12.04 with NVIDIA stable drivers.I tried to connect my monitor to laptop using VGA. In NVIDIA X Server Settings,says: Unable to load X Server Display Configuration page: The NVIDIA X driver on wiz-K61IC:0.0 is not new enough to support the nvidia-settings Display Configuration page.In standard 'Display' settings from Ubuntu,shows only laptop's screen. Sorry for Bad and Broken English. My specs: Intel Pentium Inside Dual-Core CPU @ 2.10 GHz RAM:4,0 GB GPU: NVIDIA GEFORCE GT 220M

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 400 Answers

SOURCE: Card malfunctioning while playing full-screen games

Try disabling the screen saver and see what happens.

Posted on May 18, 2009

Ad
  • 1 Answer

SOURCE: Hi, I have a strange problem ASUS X70IO laptop.

Hi! I have exactly the same problem with the same laptop. It freezes ramdonly, but more frequently when the computes is working with high requirements (antivirus, flash v

Posted on Oct 11, 2010

bronk50
  • 27725 Answers

SOURCE: I have an asus eee

During the boot process you will see on the screen to press a certain key to enter setup
Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart then
once you have your computer running try uninstalling a few unnecessary programs then click start run type cmd then type chkdsk/r/f which will scan for and attempt to fix any bad sectors and automatically fix any corrupt files on your hard drive this should schedule when you restart then defragment your hard drive
hope this helps

Posted on Jan 12, 2011

chiefmecha
  • 600 Answers

SOURCE: Hello, I want to replace Pentium Dual core

Good Day,
In your notebook configuration, you have Intel® Pentium® Processor T2370
(1M Cache, 1.73 GHz, 533 MHz FSB) and this processor model is on socket PPGA478.
The one you are targeting to replace to is
Intel® Core™2 Duo Processor T5500
(2M Cache, 1.66 GHz, 667 MHz FSB that is on both PPGA479 and PPGA478
so if you want to replace your current processor, just be sure to see if the socket models are the same with the old processor, for other socket number wont physically fit on your old socket.
Also be sure to have enough to knowledge and skill to perform the dismantle of the notebook itself.
ElectroStatic Discharge (ESD) is the term used to describe the transfer of static electricity from one object to another, and this is not good for the parts inside your note book.
Hope this helps, and thank you for using Fixya.
Another thing is to have an anti-static wrist strap to ensure no static related event can occur to your hardware.

Posted on Jul 10, 2011

  • 961 Answers

SOURCE: hello, i got maximus formula

This is your board by the numbers you supplied:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131199
You have Via P4M900 and VT8237 chipsets and Realtek ALC662(sound)
This is Asus's link for your board:
http://www.asus.com/Motherboards/Intel_Socket_775/P5VD2VM_SE/#download
It's supported to Windows Vista so, it may or may not work with Windows 7.
You can try your sound here, if necessary:
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false
and, this is Via's link:
http://www.via.com.tw/en/support/drivers.jsp
It appears your board has the support for Windows 7, if that is what you are running so these should be all you need. Let me know if I can help you further.
Dave

Posted on Jul 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No signal from CPU to Monitor. how to test VGA card?


Remove the NVIDIA graphics card and try to boot from the onboard graphics instead.

Mar 22, 2016 | Dell Computers & Internet

1 Answer

Ubuntu vga driver sis661fx


Hello try the linux driver here:

http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Third-Party+Chipset+Boards&ProductProduct=Intel%C2%AE+Desktop+Board+D201GLY2

Here is the homepage:

http://www.asrock.com/mb/SIS/P4S61/

If you can`t get the driver working, add a agp graphic card, on the mainboard that supports ubuntu/linux.

Here is a list of supported NVIDIA Graphics Chips:

http://us.download.nvidia.com/XFree86/Linux-x86/1.0-9755/README/appendix-a.html

Try ebay for a used card.

The drivers can be downloaded here:

http://www.nvidia.com/Download/index.aspx?lang=en-us

By selecting the graphic card model, and the linux system.

Good luck

Feb 01, 2013 | Intel Motherboard for ASROCK P4S61 +...

3 Answers

How do i connect my e6400 laptop to a philips LCD


Assuming you are using Windows XP, here is a link to a Microsoft article outlining how to enable the second monitor. The only thing I would add is that once you get into the properties window, your second monitor may show up darkened out. If it is, you need to right-click on it and select "Attached" before continuing on:

http://www.microsoft.com/windowsxp/using/setup/hwandprograms/monitors.mspx

Mar 01, 2011 | Dell Latitude E6400 Notebook

1 Answer

My vaio screen is green with green lines and multi colors


Try booting in VGA mode to disable the Nvidia drivers, see if this works ( also try safe mode)
Try connecting to an external monitor, see if lines vanish

If the problem goes away in vga mode, Nvidia drivers are the problem
If the problem remains on the external montor, the issue is with the graphics chip
If it vanishes using an external, issue is with the screen being damaged or vga cable damaged

Jan 11, 2011 | Sony VAIO Notebook

2 Answers

Need to connect 3 monitors. Want to use either a Nvidia 290 or ATI Radeon 9250 plus the VGA port. Installing the dual-video card disables the VGA port, cannot get it back. Help!!!


Use your AGP dual-video card for two and using a PCI VGA card for the third. It is best if the same manufacturer video driver is used for both cards, as two different ones could be problematic.

Jun 25, 2010 | HP Compaq Business dc7600 PC Desktop

1 Answer

My samsung(syncmaster 500s) monitor shows poor colours when connected to vaio laptop(XP home, nvidia geforce6200). how can i fix? could it be drivers?


yes it is drivers problem the drivers of laptop are not matching with monitor but you also try another on that laptop if persist then vga connector of the monitor is faulty

Mar 07, 2010 | Samsung SyncMaster 740N 17" LCD Monitor

1 Answer

I am using Ubuntu 9.10 in a dual-boot config with XP. I have a Samsung Synchmaster 931B monitor in analog mode. Works fine and drivers installed under XP, but will not support extended effects under...


it's your graphics card not the monitor that often has proprietary drivers to drive compiz and other effects.

If this is not a laptop, then it is easy to interchange.

Nvidia is one such vendor that supplies special drivers for Ubuntu

Jan 29, 2010 | Samsung SyncMaster 931B 19" LCD Monitor

1 Answer

Will not let me update driver for VGA connection


Hi there, welcome to fix ya.

Have you tried updating your mobo/chipset drivers?

Tim

Aug 28, 2009 | ASUS LCD Monitor

1 Answer

No signal to monitor


  1. Verify card is seated properly.
  2. Check bios settings. ie. disable onboard video, enable PNP OS installed, enable "assign IRQ to vga", disable shadowing and caching, enable passive release, enable delayed transaction, vga boot sequence: AGP, set graphics aperture size to 128MB, disable turbo modes.
  3. Verify power supply is at least 350 watts.
  4. Reboot into safe mode (press F8 right after the BIOS POST screen and before the windows loading screen) and use the program, Driver Cleaner Pro to remove Nvidia video driver remnants. Don't select all of the options, just the Nvidia driver and the plain ATI selection.
  5. Verify the monitor cable is securely connected to both the monitor and the computer.
  6. Verify that you have connected the cable to the vga port on the card and not the onboard vga port. (I'm not implying that you are dumb or anything like that, but sometimes even the best of us, overlooks the simple things... especially me! LOL)
  7. Verify the monitor cable is good.
  8. (Last but not least), try using another monitor to test. (Could be an incompatibility with the monitor.)


Jan 02, 2008 | ATI RADEON X1650 Graphic Card

Not finding what you are looking for?
ASUS K61ICA2 Notebook Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18408 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David
David

Level 3 Expert

781 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...