Question about Logitech QuickCam Pro 9000 Web Cam

1 Answer

I use skype. My callers can see me great but the audio dwindles

Computer program turns off the volume as it is generated by me during skype call. I return it to max volume and it decreases on it's own again.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 See section A. Skype in the info below to setup the Audio & Video.
Also send this to your family and friends so they have there computer setup properly.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

Posted on Apr 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn the ringer on, on the handset?


Press program/mute button to confirm and you may program the following items: Set Language, Handset Name, Ringer Tone, Ringer Volume, Message Alert, Ring To Answer, Security Code, VIP Melody, Key Tone, Audio Predial, Vibrate Ringer, Area Code, Tone/Pulse, Registration, Deregistration and Default Setting.
Ringer Volume
From the Handset Setup Menu:1. Press the caller ID-volume ( 6 or 5) button to scroll to the RINGER VOLUME sub-menu.
2. Press program/mute button to enter the menu. SET RINGER 1HI 2LOW 3OFF shows in the display.
3. Use the touch tone pad on the handset to select 1, 2or 3, or use the caller ID-volume ( 6 or 5) button to scroll to your selection. HI is the default setting.
4. Press the program/mute button to save your selection. You will hear a confirmation tone and the new volume setting shows in the display.
NOTE: If you turn the ringer OFF, the ringer off icon shows in the display.

May 27, 2016 | Uniden Cordless Phone

1 Answer

How to lower volume of callers


Re: Independent volume control for multiple callers - Skype ...

community.skype.com/t5/Windows-archive/...volume...callers/.../744506

May 23, 2012 - 5 posts
I'm typically in a call with 4 other people- some of them will be very quiet, other's quite loud. It's a hassle for me to force them to change the...

Oct 27, 2015 | Lands Phones

1 Answer

How to turn volume up for callers sound


You're going to do this during a call.

During the call,
  • You will press the "cid (up arrow)" or "pbk (down arrow)" buttons to display the current volume.
  • Then pressing either or those buttons again would bring the volume up or down of the caller/earpiece.
If you don't hear any difference, then the problem is most likely on the caller's end.
**I assume you have a phone that looks like the one displayed in image


25828871-jkqsgaiaeuckccmvdvjxuiz5-1-0.jpg

Aug 19, 2015 | Philips CD445 Cordless Phone

1 Answer

Can't hear caller on Skype


Check you settings in two places for the correct audio out settings:

1. Look up under the System Preferences menu (the Apple pull down menu) the sound icon (looks like a speaker) and click on it to open it. At the top it will show three choices, Sound Effect, Output, Input. The problem you can't hear the Skype caller is likely the Output setting is incorrect. For example, you may have Line Out selected, but you are listing on head phones. Make the device name match what you are using to make sound.
Also check to see that the output volume is not set too low. Move the slider around to increase the volume.

2. Then check your Skype setting.Under Skype>preferences, select Auto/Video. Check to see what is selected under "Speakers: and check again to see the Volume is turned up high enough to hear.

Also make sure you have a good speaker or headphone connection.

You can check to see if you can hear by calling the Skype test call number to record yourself and listen to it. Go the www.skype.com/go/help for more information.

Jan 23, 2014 | Apple Mac/iMac&iPod Speakers-(Bondie-Blue)...

1 Answer

Everything works except the person I call cannot hear me. I am using skype. The echo check on skype works, I have tried two other cameras and I have the same problem. No matter how I change the settings...


The Camera and Audio setups are unrelated in both Windows and Skype. Please check your Windows Audio devices volume settings and specifically the Microphone settings: it appears to be disabled or the volume level set much too low. The windows settings overrides the settings in Skype (or in other words, Skype volume settings are a subset of the Windows volume settings). Check that Skype audio is setup properly after starting Skype: Tools -> Options -> Audio Settings -> select your required devices and volume levels. During this ajustment process, make free calls to Skype 'Echo / Sound Test Services".
Hope it helps! Let me know how you go!

Dec 31, 2009 | Microsoft LifeCam VX-5500 Webcam

1 Answer

Microphone used with skype program stopped working after technition fixed email issues. He has no idea why


Hi

Try changing your sound mode in skype from ALSA to OSS (I know OSS isn't great but skype likes it more, ALSA support is still new). Then close any other application that could possibly be using sound, and restart skype.

The major problem with OSS is that it allows only one program to access the sound at any time, which is probaby why your audacity isn't detecting the input either - there could be a setting somewhere set to oss. SO just try closing everything like I've said above.
If it still does not work then First go to tools-->options-->sound Devices-->(UN) tick, Let Skype Adjust My Sound Settings.-->save
Reboot/Restart SKYPE i.e Log Out and Back in USING your password.

With AGC disabled you can monitor AND ADJUST the microphone level DURING A VOICE CALL using windows recording sound properties. Just drag the slider up or down for best volume without clipping. When the call ends the NEW setting that you just made manually is written back to shared.xml and will be used for the next call.
Attention: MS sound recorder will NOT do this job
Save
Retest and see if its OK.

If not do below:

Enter:
%AppData%\Skype\ in the address bar of Windows Explorer and it will display all files, regardless of whether they’re hidden or not

(You need to quit SKYPE first):

Use any editor like Word Pad or Word, as shared.xml is a real text file. For Windows XP, you can just double click, amend and save. But you MUST EXIT SKYPE

You should check your Shared.xml

In <VoiceEng> You need to insert <AGC>0</AGC> (see below)

<VoiceEng>
<AGC>0</AGC> <------ADD this line and set to zero
MicVolume>100</MicVolume>
</VoiceEng>

Note:
For Vers 2.5:
255 is max volume and 0 = low. Range is 0 (off) to 255 (maxim)
255 could be much too high, so please reduce if necessary
For Vers 2.6
100 is maxim volume and 0 = low. Range is 0 (off) to 100 maxim.

If the volume is too high, the sound will be distorted and clipped

Set for best audio quality, use echo123.

With AGC disabled you can monitor AND ADJUST the microphone level DURING A VOICE CALL using windows recording sound properties. Just drag the slider up or down for best volume without clipping. When the call ends the NEW setting that you just made manually is written back to shared.xml and will be used for the next call.

Please do accept this solution and revert for further assistance.

Thanks
Rylee

Jun 17, 2009 | Computers & Internet

1 Answer

Racieveing a bad image during the video call on Skype


Send this to them so they can properly setup the Audio & Video.
Normal 0 See section A. Skype in the info below to setup the Audio & Video.
Also send this to your family and friends so they have their computer setup properly.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:
  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
Hope this helps. Bud

May 04, 2009 | Samsung Pleomax PWC 3800 Webcam

1 Answer

I can't hear the skype caller when he calls me but He can hear me


Normal 0 See section A. Skype in the info below to setup the Audio & Video.
Also send this to your family and friends so they have there computer setup properly.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
Hope this helps. Bud


Mar 27, 2009 | Microsoft LifeCam VX-6000 Webcam

1 Answer

My problem always , my server cam connection is always busy, please me to solve this. i want my connection back to normal.


Normal 0 Install the splitcam program and it will cure your problem and it works great.

Double click on this site http://download.cnet.com/SplitCam/3000-2348_4-10500269.html
And then click on Download Now (3.5MB)

  1. Install Splitcam saying yes to everything during installation including the any warnings.

    2. Then run the Splitcam program by double clicking the downloaded program.

    3. Clicked on "Video" at the bottom right of the program window and selected your cmera.

Note: This will result in your camera being switched on and viewable in the
SplitCam program.

4. Opened up Skype (or other messengers) and go to "Tools" then "Options" then "Video settings."

5. Also setup your “Audio” while you are there.

6. Selected "SplitCam Capture" as my webcam, then click on save.

7. Webcam image will appeared in Skype or what ever messenger you are using.
Then to chat do this:
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:
  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
Hope this helps. Bud


Jan 23, 2009 | Labtec 961307-0914 Webcam

1 Answer

Caller cannot see me but I can see caller


Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Dec 27, 2008 | Logitech Webcam

Not finding what you are looking for?
Logitech QuickCam Pro 9000 Web Cam Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2644 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...