Question about Fisher and Paykel Washing Machines
Machine making a strange noise through washing cycle. machine started making a constant beeping noise then a message came up stating a service #245
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi, we had something similar happen just before christmas. Our machine seemed to finish a cycle and started making beeping noise with end light flashing. Then when I switched it back on to do another load it just started beeping with end light flashing no matter what cycle was selected. Engineer has been out and advised that it is a fault with the motherboard so has ordered another one. Hope this is of some help. Machine was tricity bendix aw1400w.
Posted on Jan 05, 2007
Please see the following link for all possible troubleshooting tips:
Hope that helps! Should you have any further questions,please feel free to post them here.
P.S. - If you find that the solution/answerI provided led you to, or resulted in a fix, please close the ticket with a FixYa!rating. I would be very grateful for your show of appreciation.
Thank you for using FIXYA!
Posted on Oct 04, 2008
SOURCE: Error Code E23
Hello welcome to Fixya
The drain pump relay on the control board has failed.
Fix: Replace control board or wire!
you can see schematics and diagrams at the site below, and order parts from them if you want.
Or call service!
Thank You For trusting us with your question
Please remember to leave a solved rating before you leave!
Posted on Dec 25, 2008
/* Style Definitions */
mso-padding-alt:0in 5.4pt 0in 5.4pt;
font-family:"Times New Roman";
I had the same problem. Error code E04 with a full load of laundry and water in the washer. Unplug the power to the washer. Take off the round cover plate in the front right. Mine did not turn clockwise or counter-clockwise, it was completely stuck. Used two flat tip screwdrivers to carefully pry it away, without damaging anything. The plate is a hard plastic but just pliable enough.
Once removed, you will see the pump (img_0001). Unscrew the pump cover slowly. There will be water coming out, so be prepared. In my case we had a LOT of water, so I drained it gradually into a couple of large garbage bags. Wrap the bag opening tightly against the pump surround to minimize spills (img_0002).
Once all the water is gone, remove the pump cover and clean out any items trapped in the pump and in the drain from the drum (img_0003). In my case it was some loose change and a small ColorCatcher sheet. Reassemble the pump and you're done.
Posted on Jul 26, 2009
sounds like a bearing... although it could be the water pump... water pump is an easy fix... bearing is not an easy fix... take the belt off the bottom of the pump (under the machine) and see if it spins freely by turning it w/ your hand... or if it seems really stiff... if it looks good then it's def. your bearing...
Posted on Jan 15, 2010
Tips for a great answer:
Dec 12, 2013 | Fisher and Paykel Washing Machines
Feb 20, 2013 | Fisher and Paykel Washing Machines
Jul 03, 2012 | Kenmore Elite Oasis 27052 Top Load Washer
Mar 19, 2010 | Maytag Washing Machines
May 24, 2017 | Fisher Washing Machines
Feb 23, 2009 | Kenmore Elite Oasis 27052 Top Load Washer
Feb 16, 2009 | Whirlpool Duet GHW9150P Front Load Washer
May 26, 2008 | Fisher and Paykel IWL12 Top Load Washer
Dec 14, 2006 | Tricity Bendix AW1400W Front Load Washer
Dec 09, 2017 | Fisher and Paykel Washing Machines
245 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: