Proform 970 recumbent bike tension won't work

Remove the pedal, clean the threads on both parts. Put Red Loctite on the threads and torque it down. Leave 24 hours before use.

Hi There ,
There might be a problem with the resistance motor.
Ring Icon Fitness, they are the distributor for this brand world wide.

It is very difficult because there are two main versions of exercise bikes, so I've picket two of each type. If you prefer an upright bike the Schwinn 140 Upright Bike is the best pick, if you're more into recumbent bikes the best option is Nautilus R514 Recumbent Bike, both of them won the 2011 best exercise bikes.

Recumbent bike works best for elderly people with back and hip problems because of the relaxed position and the angle that put's less pressure on those areas. Upright exercise bike works on more areas than the recumbent bikes including the lower abdominal muscles.

you can use BUT if you use the same: a) same type of Voltage AC or Dc b) Same ampers c) same frequency.

God bless you

adjust the magnet very well, tigh the bolts if there loose the tension will be not o.k

hey man....its just like that....i tought of the same thing when i bought mine....u just have to pull it hard the first time in order for it 2 start working....
so sit on the bike and pull it hard ....u might hear a little noise but dont get scared....

i have a problem with my console :(

Here is a link to the owners manual. If this is correct the fix should be relatively easy


http://www.iconservice.com/pdf/PFCCEX01010.pdf

Gerritt
Serving the Twin Cities

http://www.online-owners-manual.com/280180.html
This site offers the manual you are looking for however it requires payment. I will see i fi can find a site that doesnt but dont hold your breath