Question about Televison & Video

Open Question

I have an ms 1975f tv whats the code for the rc 028 all in one remote?

None of the listed codes or the code search seem to work

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Gigatech
  • 259 Answers

SOURCE: emerson remote for emerson tv/vcr combo

Emerson TV codes 0154, 0236, 0463, 0180, 0178,
0171, 0623
Emerson TV VCR Combos 0479, 1479, 1278



SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
5. To lock in the code, press and release SET.The LED will
blink twice.
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
here is the maual for your remote:
http://www.ofausa.com/remote_manual/URC4...

Posted on Dec 12, 2007

SOURCE: need code or code search proceedure for Advent RC-S11-0A remote

Most Universals work similar for code search, try this on yours. [list] [1] Manually turn on the device (eg TV) [2] Press & hold Code button until indicator light stays on (or blinks on some) release Search button. [3] Press & release device button (eg TV). The indicator should blink off. [4] Point Remote at device (eg TV). [5] Press the Power button on/off down until the device turns off. [6] Press the ENTER button or OK button to save the code as soon as the device shuts off. (Suggest you have a finger on it for fast response.) Hope this works for you.

Posted on Jan 20, 2008

  • 1694 Answers

SOURCE: bt vision remote

www.remotecodelist.com .....................................T.

Posted on Mar 22, 2008

  • 1 Answer

SOURCE: Tried everything, but can't find the right code to work.

While this isn't really a solution, I have the manual and it doesn't list an Emerson DVD/VCR (EWD2204) that I have. I can't get it to work with my VCR. I bought the RCE Universal remote (RCU703SP) at Lowes (in 2008). I can't help but notice that the date on the package is "2004 Thompson, Inc." I know that the DVD/VCR is newer than that. Perhaps this remote is a bit old (explains why it was cheap?) Anyway I did find a site that you can get the codes like in the instructions: http://remotefinder.rca.com/default.aspx?site=rca so hope this helps.

Posted on Jun 11, 2008

  • 1 Answer

SOURCE: Sharper Image Jumbo Universal Remote

i just pirchased a Sharper Image Jumbo universal Remote but i can't find a code for the Pioneer DVR 541H is DVD recorder. Does anyone have this code or  a suggestion?

Posted on Oct 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bose remote control RC-PWS II Where can i found the codes for any tv?


If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the relative post easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

Jun 27, 2015 | Bose® CORPORATION Bose - RC-PWS II...

1 Answer

What is the Directv RC 64 program code for a JVC LT-24 DE74 tv?


Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
DirectTV remote code list is given.

Sep 23, 2014 | Televison & Video

1 Answer

I need codes for my etec tv for a directv remote


This TV brand is not listed with direct tv remote control. Do a code search method. If there is a pre-programmed code in the remote, you can setup your TV by this method. For more details, visit the site 'Electro-help'. All details about code search method is described here in detail. Type in "electronicshelponline.blogspot" into your browsers' search box and click search. Pull up older posts there.

Jun 24, 2012 | Directv RC-64 Remote Control

1 Answer

Emerson model #lc200em8g wont program with rca model remote rcu600m


Hello
Codes for Emerson TV with RCA- RCU 600 are

..........004, 006, 012, 023

..........024, 025, 026, 027, 028, 029

..........030, 031, 032, 033, 034, 035

..........036, 037, 038, 039, 041, 042

..........043, 044, 046, 047, 123, 124
162, 171, 177, 179, 191, 196, 208

1. Manually turn on the TV.

Find the three digit code for your TV in

the code list below.

2. Press and hold the CODE SEARCH

button until the INDICATOR LIGHT

lights, then release the CODE SEARCH

button.

3. Press and release the TV button (The

INDICATOR LIGHT will blink then

remain lit).

4. Enter the code using the Number

Buttons.

After your code is entered, the

INDICATOR LIGHT will turn off. If the

code is not valid, the INDICATOR

LIGHT will blink. Check the code list

and repeat process.

5. Aim the remote at your TV and press

the ON•OFF button. Your TV should

turn off.

Note: If your TV does not respond, try all the

codes for your brand. If the codes do not

work, or your brand is not listed, try the Code

Search method on page 16.

6. With your TV on, press CH+ (CHANNEL

UP) If the TV responds, no further
programming is required.
OK

Mar 22, 2011 | RCA 257003 Remote Control

1 Answer

I need the universal codes for my verizon fios remote, otherwise another recommendation of a universal remote that will operate my tv.


Setting up the Philips RC 144 remote if the remote codes are invalid or unknown If you do not know the remote codes for a device, or if you've tried all the listed remote codes for your device and none of them work, you can search for the correct remote code by following the steps below.

Note: These steps only apply to the Philips RC 144 Remote Control. If this is not the make and model of your remote, go to the supported remote control models page and find the instructions for your specific remote control.

Searching for a Device Code
  1. Turn on the device you want to program into your remote, for example if you are programming your remote to control your TV, then turn on the TV.


  2. Press and hold the device button for the device you turned on in step 1 (DVD, AUX, TV, STB) and press OK. Release both buttons.

    The mode buttons blink twice.


  3. Press 922.


  4. Point the remote control toward the device you are setting up and press the upper part of the Play button.


  5. Press the Fast Forward button. If the device you are setting up does not turn off, keep pressing the Fast Forward button until the device powers off. (You can use the Rewind button to go back, if necessary.)


  6. When the device powers off then you've found the correct code for that device. Press OK to assign the code in your remote control.


  7. Note:
    There are over 200 possible combinations for TV and DVD codes. The most common codes are tried first but you may still need to press the Fast Forward or Rewind buttons over 200 times to find the correct code for your device.

    If you reach the end of the list of codes, the entire remote flashes twice and returns to normal operation. You can exit programming at any time by pressing the Exit button.

Feb 28, 2011 | Apex Digital LD4088 LCD TV

1 Answer

Need remote code for zenith tv model c13a02d


remote code don't go by model, you get a list of codes and you just try them one at a time until one works, here are the most up to date remote codes for a Zenith TV.here are the three digit codes
101, 142, 149, 177, 241, 345.
remember all universal remotes have code search, so if none of these seem to work do the code search function, it is outlined in the user manual of your remote.

Jan 28, 2010 | Zenith C13A02D 13" TV

1 Answer

How do i program my hamton bay universal remote to wor with my magnavox vcr/dvd recorder combo unit


Magnavox VCR codes are 007, 011, 028, 032, 059
Magnavox DVD code is listed as 001 only.

Manually turn on the device. Press and hold the SET button then press and release the VCR button, then release the SET button. Enter a three digit code then press power. If it does not turn off the device, try the next one.

You might also try the 'code search' if none of the above codes work. Press and hold SET then VCR and release both. Then Press and release the SET button again. The indicator light should begin blinking. Press and release the POWER button until your device turns off. You may have to go through up to 200 different codes until it turns off. Once the device does turn off, press the VCR button again to store the code.

Jun 19, 2009 | Universal Remote Control Hampton Bay...

3 Answers

I need a code for an Emerson Model LC320EMX television that can work with my DirecTv remote. I've tried all the ones that were given by DirecTv & none of them worked. Has anyone had the same problem?...


I was just reading everyone’s comments regarding not being able to find the Emerson LC320EMXF 32′ LCD TV code for the Comcast DC50X Digital Transport Adapter. I’m using the Sylvania code of 11864 and the Comcast DC50X remote seems to work fine. Hopefully it’ll work for you as well.

Jun 17, 2009 | Emerson LC320EM8 32 in. LCD TV

11 Answers

Code for universal remote rm-810


There is an easy way to setup this remote controllerl(RC). It called "Automatic Code Searching" which means that you don't have to even find the code. The controller will searching it for you. Just do the following steppes.

1. Turn on the "Device" to be remotely controlled, e.g. TV, VCR.

2. Point the RC right to the "Device" .

3. Press a device button on the RC represent the "Device", e.g. TV, VCR, DVD etc. You can see the indicator lid flash once.

4. Press the SET and than the POWER button on the RC. hold both buttons for 2 seconds or more, you will see the red lid on. then release both buttons simutenously. after that the indicator lid will be flashing, means the searching started.

5. Keep pointing the RC to the "Device" until it is shut down by the RC, Press any button in 1.5 second to finish the setting.

You can try the RC now. It should work. My one is working.

Aug 19, 2008 | Philips Magnavox Learning Universal Remote

4 Answers

Comcst remote control code not working


look on the label on the back of your Emerson TV. Read the small print and see if there is a possible different manufacturer that actually made the Emerson TV. Just because it says emerson doesn't mean emerson made it. Also if no luck there try the UL listing code and search that code to the UL listing website. That may help also.

C-Dog

Feb 12, 2008 | Emerson EWF2703 27" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73698 Answers

Cindy Wells

Level 3 Expert

5062 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...