Question about Vivitar 100-300 f/5.6-6.7 Manual Focus Lens for Pentax KA 215964

1 Answer

Ford Street KA

A Yellow light is appearing on bottom left hand side of the dashboard I do not have a manual - is it the oil light? I only had it serviced in December and an oil change?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

To download a FREE users manual,
Go to ; www.ford.fleet.com
To find your manual click on 'Maintenance' then 'Owners Manual'. Enter your make and model and a list of files wil be auto generated. You can save from here or just click on the file you need and a new window will come up with your file as a readable PDF. You can save or read from here. If this does not work then you may need a free copy of Adobe Reader at www.adobe.com
Hope this helps, this is the ONLY site I have found with FREE manuals !!!

Posted on Jul 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix the no sound on my droid razr maxx?


Usually you can use the bottom on the left side. It's volume up (press on top part) or volume down (on bottom part). If that doesn't work go to Settings and look for volume.

Jun 23, 2014 | Motorola Mobility XT912M DROID RAZR MAXX...

2 Answers

How do I disassemble an antique oil lamp?


The burner assemblies on all old oil lamps unscrew from the tank assembly and can be lifted out. The OIL is usually old kerosene, or diesel fuel. The burner assembly is not usually designed to be taken apart but the wick can be replaced if it's no longer long enough to reach the bottom of the tank, and their available all over the internet.

If the burner assembly seems to be seized to the tank you might want to put some GUNK on the seam and let it soak in overnight.

There is nothing particularly hazardous about the old oil but it is messy and you probably will want to remove all of it from the lamp and if you intend to use it, replace it with kerosene or lamp oil that can be bought at many hardware stores.

May 12, 2014 | Ricoh A12 50mm F/2.5 With Aps-c Gr Lens...

1 Answer

IR light doesn't work on security camera.


nitevision is in monochrome.. but if the irs dont work in that camera need to either get an ir light for that unit or replace that specific camera..the ir board is burnt out..or disconnected..I have several systems in use at different locations and I do installs for residential locations..I get some of my units off ebay..

Jan 20, 2014 | Zmodo Surveillance CM-S38901SV 540TVL High...

1 Answer

Yellow Camera in LCD Screen with a ! sign. What does this mean?


The camera is warning you that the shutter speed may be too slow for you to handhold the camera steady enough to prevent camera motion from blurring your photo.
For full details refer to the "Warning Messages and Displays" section of the manual (page 113 in my copy). If you need a manual you may download a copy here.

Apr 29, 2012 | FujiFilm FinePix S2940 14MP Digital Camera...

1 Answer

How do you fix a black line that appears in a straight line down the page. Have already cleaned rollers


This could be a pixel problem look threw your owners manual and in PC settings to find where to do an alignment recalibration if the option is not available unplug the printer form PC uninstall the printer reboot the PC. When windows is back up reinstall it like it is new then you should have the option come up on screen or it will do it manually. Sometimes the drivers get scrambled and fragmented just like our hard drives. If this does not solve it damage to the inner circuit board has happened. Remember to rate my solution and give testimonial this is how i earn my achievements here on FixYa Thanks in advance

Apr 26, 2012 | HP Laserjet P2055dn Printer

1 Answer

Hi there, I don't know if it's a problem or not (I can live with it :) ). I just got a Canon EF 50mm f1.8 II lens, and I really love it. But: When I'm using the eye-level viewfinder (and not...


You may just have the left auto focus points selected. You don't say which camera model you have. If on the back of your camera you can see a button with an icon showing 5 small white blocks in a plus sign in a white box press this to select the auto focus points. It should show the available auto focus points and then use the left/right (wheel) button to change the selection

Jul 01, 2011 | Canon EF 50mm f/1.8 II Lens

2 Answers

On a Nikon D80, I get an fEE error on the display even with the lens' aperture locked at f/22 as required


Check to make sure that the tab is depressing tab on the left-hand side of the mount, when lens is facing you. Also check the contacts and clean them.

Dec 05, 2009 | Nikon Normal AF Nikkor 50mm f/1.8D...

1 Answer

I am looking for a T4 or TX mount in a Pentax K mount


There is no T4 Pentax K mount. The K mount did not exist until 1975-76. The T4 lenses pre-dated the K mount. The TX lenses were introduced starting in 1975 and the series included a K-mount. However, there is no Ka mount as the TX series pre-dated the Ka cameras. A TX mount will fit on a T4 lens, however, you will lose one stop and automatic function, which is why the TX was introduced.

Oct 10, 2009 | Vivitar Camera Lenses

1 Answer

For Nikon AF 24-50mm f/3.3-4.5D Zoom-Nikkor Lens I need instruction book. Specifically, there are dots side by side marking the apeture selected, left one yellow, right one green, what one is correct and...


The green mark is the index for the aperture setting at 24mm, the yellow mark is the index at 50mm. These really only matter if you are setting the exposure manually and using an external meter. The green mark is the primary mark -- as you turn the ring you will notice that it lines up with a number at every clickstop, while the yellow one is a bit off.

The pull down lever you ask about is the aperture lock. Autofocus film cameras and all digital cameras expect the lens to be set at smallest aperture (highest number). They will give an FEE error if it is not set correctly. When you turn the aperture ring to smallest aperture you will be able to slide the white dot into position next to the orange mark, and that will lock the aperture ring so that it is not accidentally tgurned while using or changing the lens.

Feb 22, 2009 | Nikon AF 24-50mm f/3.3-4.5D Zoom-Nikkor...

1 Answer

Xl1s issue


You mentioned that you were editing it out which means that it is the video recording issue. When video recording has light or sligh pixilation on the side, the head may need cleaning or tracking system may need adjustment. Initially, try to clean the head with a tape head cleaner, run it for about 10 sec but not more. It this resolve, it was simple head clogging. Otherwise, camcorder needs adjustment by technician. Good luck, James. For further assistance, go to www.camerarepairjapan.com

Aug 08, 2008 | Canon 16x Manual Servo for XL1S

Not finding what you are looking for?
Camera Lenses Logo

416 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vivitar Camera Lenses Experts

teddyboy

Level 2 Expert

413 Answers

kakima

Level 3 Expert

96417 Answers

Are you a Vivitar Camera Lens Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...