Question about Panasonic Lands Phones

Open Question

KX-TG1031CS no dial tone

Callers say the line is engaged

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 25 Answers

SOURCE: my KX-TG 8231B

Make sure the phone is pluggd into the wall properly. If so and no dial tone is detectable make sure you installed the batterys on the handsets correctly and that they are fully charged. If you have a friendly neighbor with a working phone line plug youre phone into their line and if it does not work and you followed my previous instructions seek a repair center in youre area that honors panasonic warranties. If the phone is pluggd in at the neighbors house and it works use it to call the phone company.

Posted on Mar 26, 2008

  • 12 Answers

SOURCE: i have no dial tone on one line. call my number and it rings

IT IS DUE TO NETWORK FAILURE OF THAT LINE

Posted on Jan 05, 2009

  • 1 Answer

SOURCE: Panasonic KX-TGA601CB cordless phone Was working

phone says move closer to base

Posted on Jan 28, 2010

hmerchant110
  • 7191 Answers

SOURCE: User manual for Panasonic cordless phone 6.0

Hi,
You can download the user manual by clicking this link.

  • You'll require Adobe PDF Reader installed on your computer to view this manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/
Hope this solves your problem. Thanks for using FixYa

Posted on Mar 22, 2010

  • 37 Answers

SOURCE: My phone says line in use and no dial tone

I also, but my dsl is still functional...

Posted on Oct 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a KX-T7130 phone system with intercom. for the last 4 weeks, every phone will ring once and then the call gets hung up before I can answer it. I can use every phone to call out, but just can't...


Most likely NOT your phone system (anonymous)

Neither is it likely accidental...

What it sounds like you are getting is a "ring splash"

It is a token ring to let you know a call was forwarded...

My best suggestion would be to call YOUR OWN
number and find out who has been getting your call...

Or at least what kind of TREATMENT your callers have been getting...

Since this is a GLOBAL SITE... I would suggest you consult
your service PROVIDER.. for the appropriate enable & cancel CALL FORWARDING.

BELL-SYSTEM Codes to invoke and cancel

Codes: *72 and *73: respectively

Forward... *72 = ("star, seven, two")

*72 (wait a second dial tone) dial tone + (forward number)...
If the call is answered the FORWARD is complete...
(confirmation)

Else
Repeat the SAME dialing PROCESS
(OK: indicated by two stutter dial tones followed by dial tone).
((confirmation)).

Cancel FORWARD...
*73: To CANCEL forwarding... *73 = ("star, seven, three")

(again OK... Success is indicated by two stutter dial tones followed by dial tone (yet another confirmation))...

Hope this helps...

https://en.wikipedia.org/wiki/Carnac_the_Magnificent Carnac the Magnificent

May 24, 2017 | Panasonic KX-T7130 Corded Phone

1 Answer

Kx-td7896 no dial tone


hi re check might have wrong connections in the telephone connector ( box )

Sep 06, 2012 | Panasonic Lands Phones

1 Answer

Dial tone on speaker-phone but no dial tone on line 1


Either button mapping or no dial tone at the system cabinet. If your desplay sas CO1 and you have no dial tone, go to the sytsem cabinet ans swap the modular plugs for CO1 and CO2. If the No Dial Tone moves, "mus be sumpin wrong wit yo lines".

Carl

Aug 13, 2010 | Panasonic KX-T7730 Corded Phone

1 Answer

Can not get kx-t7885 to get a dial tone. The phone is paired with it's base, and will get the panasonic dial tone but not an outside line.


How are you trying to get an outside line? By dialing 9? If the host system happens to be a TA series, you have to tell it how many lines you have, or that you don't have lines that have hardware ports but no dial tone, since systems select outside lines from the top down.

From System programming, program 400 defines connected lines.

Carl

Nov 22, 2009 | Panasonic KX-T7885 Cordless Phone

1 Answer

Change pulse into tone


Go to the menu and choose Tel line and the go to set dial mode and then choose the dial mode like dial or pulse mode


Nov 22, 2008 | Panasonic KX-TG2631 Cordless Phone

2 Answers

Panasonic KX-FM220 fax machine does not have a dial tone


is your line provider ok.connect your line to ordinary phone to check if there is really a dial tone from the line provider.if there is a dial tone please let the analog board be cheked by a technician near you

May 01, 2008 | Panasonic KX-FM220 Plain Paper Thermal Fax

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

john milligan

Level 3 Expert

512 Answers

george  peters
george peters

Level 3 Expert

860 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...