Question about Uniden Cordless Phone

Open Question

Need to program and store phone numbers

I have a GE corded phone with touch tone buttons MOD # 2-9220NIB and need instructions for programming it

Posted by on

5 Suggested Answers

tboy1959
  • 1 Answer

SOURCE: programing the memory numbers

http://www.uniden.com/pdf/EXI2960om.pdf

Posted on Sep 30, 2007


  • 1 Answer

SOURCE: programming instructions for used phone

Program Thomson Consumer Electronics (GE?) 2-9316A Speaker Phone (what we found works)
To program:
1. press speaker or lift handset.
2. press STORE
3. dial the number to be stored
4. press MEMORY DIAL
5. press location (0-9 on keypad or 1 of the 3 emergency quick dial)
6. press speaker or hangup.
To dial emergency numbers:
1. press speaker or lift handset.
2. press any of 3 emergency quick dial
To dial stored numbers:
1. press speaker or lift handset.
2. press MEMORY DIAL
3. press location (0-9 on keypad)
Does anyone know how to add PAUSE in a stored dial string?

Posted on Feb 21, 2008

  • 1 Answer

SOURCE: Programming GE corded speakerphone

I fixed this just now on my phone, while seeking a solution here.
- Do not do what you'd think... putting the phone and name info first. It looks like it will take this info but it won't. That's where the frustration comes from.
- Dial the PHONE# FIRST.
- THEN click STORE.
- Then click the location (A-C or 0-8... save 9 for 911 if you don't have a red emergency key).
- Then click STORE again.
- Then type in the phone number again... this works, though there's probably a way to do it w.o putting in the number twice... but since it works, don't sneer at the free advice :) LOL.
- Then click Store
- Then type in the NAME
- Then Store.

Done. Repeat for other names/numbers. Now that you have it down, you can figure out how to do this without entering the phone number twice... but since I have a busy day, I'm just doing it this way.

Best wishes!

Posted on Jul 29, 2008

playaway
  • 18 Answers

SOURCE: instruction manual for older style corded GE speaker phone

Here are the quick instructions on how to program the phone numbers.

You can also download a copy of the User's Guide from: http://www.retrevo.com/search/v2/jsp/downloadPage.jsp?doc=c96e9c823d0df43989039e5385bef04a&q=GE+29322GE1

Just enter the 4 digit captcha code and you will be able to download the User's Guide.

Please let me know if yo have any questions.

Good Luck!
++++++++

STORING A NUMBER IN MEMORY
To program priority keys:
1. Make sure the telephone is properly installed. Pick up the
handset and listen for the dial tone. If you don’t hear the
dial tone, recheck or repeat the installation steps.
2. Press the SPEAKER button or pick up the handset.
3. Press the store button.
4. Dial the number to be stored.
5. Press the store button again.
6. Press the A, B or C button.
7. Press the SPEAKER button or hang up the handset.
To program frequently called numbers:
1. Press the SPEAKER button or pick up the handset.
2. Press the store button.
3. Dial the number to be stored.
4. Press the store button again.
5. Press one of the 10 memory location buttons 0-9.
6. Press the SPEAKER button or hang up the handset.

Posted on Aug 12, 2008

  • 79 Answers

SOURCE: Program our Uniden Compact Phones

What is the model number?

Posted on Aug 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need instruction manual to program speed dial


I was unable to locate a user manual for that particular device, however the basic instructions for programming speed dial functions are normally very similar between most phones.


Generally there are ONE TOUCH Speed Dial buttons labelled something like M1, M2, and M3 on the dial pad somewhere.


There should also be another button labelled PROG or STORE on the keypad as well.


Normally to program a number into a ONE TOUCH speed dial memory location you carry out the following procedure:


Lift the handset.


Then press the PROG (or STORE) button.


Now just use the number keypad to dial the full telephone number that you want to store in a Speed Dial location.


Once the full telephone number is dialed, then push the M1 button to store that phone number in the M1 One Touch Speed Dial location.


The phone may or may not show some kind of confirmation that the M1 location was just programmed, then just hang up the handset.


Now when you lift the handset and press the M1 button, the phone should automatically dial the phone number you programmed into it.


Now just repeat the same process for the M2 and M3 One Touch Speed Dial buttons with other phone numbers if necessary.


To change one of the Speed Dial numbers, just carry out the normal programming procedure for that location using the new phone number and the old number will simply be overwritten.


I truly hope that was helpful to you.
Good luck and take care.

Joe.

Dec 02, 2011 | Southwestern Bell FM-480 Corded Phone

2 Answers

Panasonic KX-T7730, we have a 824 phone system and cordless handsets (kx-tg1711) we cannot make outgoing calls on these handests but can take incoming calls and can transfer calls. how do we programme


  • Locate the program and auto-store button on your telephone. You will be using these to customize many of the features on your KX-T7730. The program button is used to enter or exit programming.

  • 2

    Program your outgoing line preference, i.e., the line you prefer to seize when you go off hook. Press "Program" "1" "1" "store" for no line. Press "Program" "1" "2" "Store" for an idle outside line. Press "Program" "1" "3" "Outside Line Number" "Store" for an assigned outside line. The outside line number will be a single or double-digit number that is set through your phone system.

  • 3

    Program your incoming line preference, i.e., the line you prefer to answer when you go off hook. Press "Program" "2" "1 "Store" for no line. Press "Program "2" "2" "Store" for ringing line. Press "Program" "3" "Outside Line Number" "Store" for an assigned outside line.

  • 4

    Program your flexible CO buttons. These are the inner row of 12 lighted buttons. Your outside lines need to be programmed to these--you can choose any of these 12 buttons in any order. Press "Program" "CO Button" "0" "Outside Line Number" "Store." The outside line number will be a single or double-digit number that is set through your phone system.

  • 5

    Program any other unused flexible CO buttons for an extension number or any frequently dialed phone number. Press "Program" "CO button" "1" "Extension Number" "Store" or "Program" "CO Button" "2" "9 + Phone Number" "Store". A "9" must be entered at the beginning of a phone number to tell your phone system to seize an outside line before dialing, e.g., "9-1-212-555-1234."

  • 6

    Locate the programmable feature buttons (the row of 12 solid buttons on the right). These buttons are basically one-touch buttons that can be set for extension numbers or phone numbers. Press "Program" "(PF) Button" "Extension Number" "Store" or "Program" "(PF) Button" "9 + Phone Number" "Store." Remember to press "Program" again to exit programming.

  • 7

    Locate your "FWD/DND" button. This button is used for setting "Call Forward" or "Do Not Disturb" on your telephone. To set call forwarding, go "off-hook" either by lifting the receiver or pressing speakerphone. Make sure you go to intercom and not an outside line. To forward all calls, go off-hook, press "FWD/DND" "1" "extension number" (the extension number that you wish to forward all your calls to) "#". After you hear a confirmation tone, place the receiver on-hook. The steps to set call forwarding for busy/no answer are the same as above, except you will press "2" in place of "1". To cancel call forwarding, press "0" in place of "1".

  • 8

    Program "Do Not Disturb," which stops your phone from ringing--any callers will just hear a DND tone. To program, go off-hook, press "Program" "4" "#" on-hook, to set. Press "0" instead of "4" to cancel.

  • 9

    Locate the message button--this works in coordination with your message light at the top right of your telephone. If the light is lit, press "message" to hear a message left to you either by another extension or a voice mail system. The message button can only be programmed as a message or one-touch button. To program as a message, press "Program" "Message" "3" "Store." To program as a one-touch, press "Program" "Message" "1" "Extension Number" or "Program" "Message: "2" "9 + phone number."

  • 10

    Return your KX-T7730 to its default settings by pressing "Program" "#" "*" "Store."



  • Read more: How to Program a Panasonic KX T7730 ' eHow.com http://www.ehow.com/how_7159736_program-panasonic-kx-t7730.html#ixzz1eYPzbevZ

    Nov 23, 2011 | Panasonic KX-T7730 Corded Phone

    1 Answer

    How do i program pohone numbers


    This just worked for me:
    Press the Speaker button at the bottom right of the unit - you'll hear a dial tone.
    Press Program.
    Dial the number you want to put in memory.
    Press the one-touch button where you want to store the number - press it long enough to hear 2 quick beeps.
    Press Program again.
    Press Program AGAIN, holding long enough to hear 3 or 4 quick beeps.

    I hope this works, because I'll come looking for my own solution next time I need to program one of these!

    Jan 13, 2011 | AT&T 922 Corded Phone

    2 Answers

    Instruction manual for older style corded GE speaker phone


    Here are the quick instructions on how to program the phone numbers.

    You can also download a copy of the User's Guide from: http://www.retrevo.com/search/v2/jsp/downloadPage.jsp?doc=c96e9c823d0df43989039e5385bef04a&q=GE+29322GE1

    Just enter the 4 digit captcha code and you will be able to download the User's Guide.

    Please let me know if yo have any questions.

    Good Luck!
    ++++++++

    STORING A NUMBER IN MEMORY
    To program priority keys:
    1. Make sure the telephone is properly installed. Pick up the
    handset and listen for the dial tone. If you don’t hear the
    dial tone, recheck or repeat the installation steps.
    2. Press the SPEAKER button or pick up the handset.
    3. Press the store button.
    4. Dial the number to be stored.
    5. Press the store button again.
    6. Press the A, B or C button.
    7. Press the SPEAKER button or hang up the handset.
    To program frequently called numbers:
    1. Press the SPEAKER button or pick up the handset.
    2. Press the store button.
    3. Dial the number to be stored.
    4. Press the store button again.
    5. Press one of the 10 memory location buttons 0-9.
    6. Press the SPEAKER button or hang up the handset.

    Aug 11, 2008 | GE 29322GE1 Corded Phone

    1 Answer

    How do I set 1 touch dialing?


    It's pretty much phone system dependent on the one touch, but PROG F button, 9+number STORE usually works.

    As far as the calling into IVR systems, you may have to press # to send touch tones after you dial a number, or adjust the tone length in programming. Of course not all systems let you change DTMF times, but that's another thread :-)

    Carl

    Jul 02, 2008 | Panasonic KX-T7731 Corded Phone

    1 Answer

    CHANGING THE RINGTONE


    Depending on your model system, it may or may not be possible. I included the two different methods to change the ring tone below depending on your system. Give it a try.

    KX-TDA Systems
    KX-TD Systems
    Press PROGRAM
    Program Press the CO Line key you wish to change
    Press the same key again, enter the tone number (01 through 30)
    img%20right%20hand.gif You will hear the tone associated with the tone type number. For example, if you press 02, you will hear the tone associated with tone type 22. Press each number (01-30) until you hear the tone you desire.
    Press STORE
    img%20right%20hand.gif The tone is now stored for that line on that phone only.
    Press PROGRAM 99 (or PAUSE 99 if you do not have a PROGRAM button
    Press the CO Line key you wish to change
    Press the same key again, enter the tone number (1 through 8)
    img%20right%20hand.gif You will hear the tone associated with the tone type number. For example, if you press 2, you will hear the tone associated with tone type 2. Press each number (1-8) until you hear the tone you desire.
    Press STORE
    img%20right%20hand.gif The tone is now stored for that line on that phone only.

    Mar 20, 2008 | Panasonic KX-T7730 Corded Phone

    1 Answer

    GE cordless model 26928GE2-A


    Dial tone is OK, but can't dial out
    • Make sure the tone/pulse setting is programmed
    correctly.
    TONE/PULSE DIALING
    1. Make sure the phone is OFF (not in TALK mode).
    2. Use the CID/VOL left (-) or right (+) arrow button to
    scroll to 1TONE or 2PULSE, or use the touch tone
    pad on the handset to enter the desired setting. For
    example, to choose TONE dialing, press the number 1
    key. 1TONE is the default setting.
    3. Press flash/program to store selection. You will hear a
    confirmation tone.

    Feb 06, 2008 | GE Cordless Phone 900 MHz

    1 Answer

    From Pulse to tone


    TONE/PULSE DIALING
    1. Make sure the phone is OFF (not in TALK mode).
    2. Use the CID/VOL left (-) or right (+) arrow button to
    scroll to 1TONE or 2PULSE, or use the touch tone
    pad on the handset to enter the desired setting. For
    example, to choose TONE dialing, press the number 1
    key. 1TONE is the default setting.
    3. Press flash/program to store selection. You will hear a
    confirmation tone.

    Aug 31, 2007 | GEH5450 Cordless Phone

    1 Answer

    GE 29439GE2


    Copy directly from the manual: TONE/PULSE Your phone is set to TONE at the factory. Set the TONE/PULSE selection to PULSE if you have pulse (rotary). If you don't know which type of service you have (pulse or tone), check with your phone company. To program TONE/PULSE for all 3 lines: 1. Press STORE/IN 2. Press 0 for PULSE or Press 1 for TONE 3. Press STORE/IN 4. Press TONE To program TONE/PULSE for each line individually: 1. Press STORE/IN 2. Press 0 for PULSE or Press 1 for TONE 3. Press STORE/IN 4. Press LOWER 5. Press line number (1, 2, or 3)

    Jan 11, 2007 | GE 29439GE2 Corded Phone

    Not finding what you are looking for?
    Uniden Cordless Phone Logo

    Related Topics:

    65 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Uniden Lands Phones Experts

    kakima

    Level 3 Expert

    102366 Answers

    k24674

    Level 3 Expert

    7993 Answers

    Cindy Wells

    Level 3 Expert

    4952 Answers

    Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...