Question about Jura Capresso Impressa Z5 Espresso/Coffee Maker

Open Question

Error S on jura z5

Machine makes loud clonking noises then goes into error s

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

EsWorld
  • 1618 Answers

SOURCE: Jura Z5 - no water being sucked up through the system

If you are holding the filled water tank in your hands does it leak? If no then the o-ring in the bottom of the hole on the machine where the tank sits is damaged.
If yes then check the spring and o-ring on the bottom of tank.

Posted on May 15, 2009

  • 143 Answers

SOURCE: jura capressa imprezzo z5 coffee machine, did not

return to service centre this one's a *****

Posted on Sep 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jura impressa Z5 doesn't switch on anymore. A few days before just was displaying "maintenance" and then no more signs of life.


Search Results

    How to Fix Jura Z5, Z6 and Z7 - YouTube

    ? 16:03
    https://www.youtube.com/watch?v=HlCu5m9isT4
    Aug 18, 2013 - Uploaded by Parts Guru
    I changed the filter, pressing button for System Fill, get message System is filling. .... My Jura Capresso Z5's milk frother doesn'twork. When I ...

    Jura Capresso Z5 Impressa - No milk frothing - YouTube

    ? 1:05
    https://www.youtube.com/watch?v=_jF_8rNUn4A
    Oct 25, 2013 - Uploaded by Frederic Valiquette
    Hi all, My Jura Capresso Z5 Impressa is acting up. The milk frother doesn't work anymore. When I ...

    [PDF]Instructions for Use, Manual JURA IMPRESSA Z5 - Esperanza

    https://www.esperanza.ch/.../download_manual_jura_impressa_z5-gen2_...
    The IMPRESSA Z5 - Generation II Manual. The 'IMPRESSA .... 5 Preparation at the touch of a button. 40 ..... As coffee and coffee specialities are very important to JURA, we have compiled a ...... It doesn't matter whether whole milk or skim.

    My Jura Impressa Xs90 won't switch on and nothing is - Fixya



Jan 31, 2016 | Coffee Makers & Espresso Machines

1 Answer

Jura z5, steam not working and message says "unit is heating" sometimes. however pressing a coffee button it goes away and still makes coffee.


There are two heaters in the Z5.. one for coffee, one for steam.
Sounds like you have a fault with the steam heater.

Dec 15, 2014 | Jura Capresso Impressa Z5 Espresso/Coffee...

2 Answers

Error 4


Unfortunately the error message 5 indicates that the thermal block and/or thermal sensor and possibly a control board need to be tested, and likely one or more, possibly all, replaced. My recommendation is to send it to Capresso ask what it will cost first. M

Aug 11, 2014 | Jura Capresso Impressa Z5 Espresso/Coffee...

2 Answers

How can I fix my Jura Impressa z5? I have an error 4 on the display of my Jura Impressa Z5 coffee machine and other than turning it off at the power it won't do a thing.


Error 4 is in Plain text a Temperature measurement error in steam cycle (circuit)

Causes / Remedy:

Sorted in order of likeliness !!!

1) Thermal sensor is defective. Determine the resistance value at 20 degrees C to be about 12kOhm. - Replace thermal sensor if not.
OR
2) Cable broken to the thermal sensor or oxidized contacts. - Replace / repair the cable.
OR
3) Logic board defective - replace electronics / replace EEPROM.

If you want to do the job yourself. Parts for repair solutions above are
1) Replacement Thermal Sensor with cable GBP 19.99 plus postage
2) if you can fix broken wire or oxidized contact no need for parts
3) logic board GBP 198.99 plus postage (there might be the possibility to have EEPROM on the board replaced at a fraction of the price. Defective board must be sent in first.

It also is possible to sent in the machine for repair.

Jun 11, 2014 | Jura Capresso Impressa Z5 Espresso/Coffee...

1 Answer

Jura f70 error 8 solution


There is a Jura Error Guide that says:
  • Turn machine off, turn the main power switch off and unplug machine for at least one minute.
  • Turn machine on again. If the error message comes up again, try one more time.

Dec 31, 2009 | Jura Capresso Impressa Z5 Espresso/Coffee...

1 Answer

My jura capresso says system fill...it makes a lot of noise


System fill is usually when the machine auto solenoid fill valve is putting water into the boiler. If it is making noise then the solenoid is clogged or there is no water getting to the solenoid.

Jun 16, 2009 | Jura Capresso Impressa Z5 Espresso/Coffee...

Not finding what you are looking for?
Jura Capresso Impressa Z5 Espresso/Coffee Maker Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jura Capresso Coffee Makers & Espresso Machines Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...