Question about Washing Machines

Open Question

Washing machine Panasonic NA-F80B2 error code U12

After washing and rinse done the machine stop with error U12 before proceed the spin process

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6277 Answers

SOURCE: Hi friends, I have Panasonic

Hi from retired Englishman in SW France,

Sorry but I do not know your particular machine BUT I would suggest as a first step that you clean the drain motor lint tray/filter. So many 'faults' are caused by blocked filters. The motor is unable to drain all of the water in the allotted time.
Here are my complete, general pre-typed guidance notes for checking filters and motors ;-0)
-------------------------------------
If you are unsure where the filter is, it is often behind the front lower (kick) panel (or in some machines at the rear in an awkward position!) and held in by a round cover/knob.

REMOVE POWER AND ENSURE YOU HAVE A WATER RECEPTACLE/RAGS TO SOAK UP THE WATER WHICH IS BOUND TO POUR OUT!

It's surprising what people have found in theirs! It is always worthwhile checking it on a regular basis.
Now- whilst the filter is removed it is normally possible to see the drain motor and ensure it is not jammed by a foreign object such as a needle or a toothpick. It should be able to be turned by hand/finger- the power IS OFF!
At this point it is also possible to test if the motor works. No clothes or water in the machine, select a spin cycle and put the power back on. You should be able to see the motor turning at some point, possibly straight away. If it doesn't work then the motor is malfunctioning!

Hope the filter is the problem and good luck!
John C

Posted on Mar 13, 2011

richroth
  • 9472 Answers

SOURCE: The error code U12 shows

The "U12" is due to the magnet that is attached at the tip of the lid. the magnet acts as a sensor that give info whether the lid is closed or open. Either the magnet has come off or it is not aligned properly.

Posted on Jul 31, 2011

blueextc3221
  • 15935 Answers

SOURCE: got error code u11

u11 is not a valid error code - please recheck.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 16, 2010

blueextc3221
  • 15935 Answers

SOURCE: Panasonic washing machine noisey

It appears your clutch assembly has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 19, 2010

  • 1 Answer

SOURCE: panasonic washing machine model no

it is due to the magnet attached at the tip of the lid. the magnet acts as a sensor that give info whether the lid is closed or open. i got the same problem too but luckily the i found the magnet nearby the washing machine.

Posted on Jan 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why the Panasonic Washing Machines error code "h 02" displaying?


Google "panasonic washing machine error codes"

Jun 11, 2016 | Washing Machines

1 Answer

Panasonic NA-F80B2 doesn't filter Water to the machine


None ever have that I know of . the inlet hoses have a screen in to stop large chunks only

Jan 18, 2016 | Washing Machines

1 Answer

My washing machines NA-F65B2 Error code U12


This has already been answered elsewhere. Search "error code u12 for na f65b2". Find previous answer there

Jul 09, 2015 | Washing Machines

1 Answer

Panasonic model Na-f70b2 error. U12 and stop motor


Try this: it should give answers to the "self-diagnostics".
http://panasonic.ae/en/manuals/NA-F70B2-65B2.pdf

May 05, 2015 | Washing Machines

1 Answer

My panasonic waching machine model is NA F80B2 Error is U 11 U 14


See http://www.manualslib.com/manual/783539/Panasonic-Na-F78b2.html?page=13#manual

Feb 06, 2015 | Washing Machines

1 Answer

Hi, I'm using Panasonic Aquabeat NA-F130T1.(13kg),Fuzzylogic,Toploading. It stops at end of wash mode before rinse and blinks U12 code. Pls advise? Thanks.


Hi there, I'm using Panasonoic F130T1 washing machine.
my problem is,the washing did'nt complete n the water remains in the machine.
Pls advice as how i could solve this problem,tq.

Azhari.

Jan 11, 2013 | Washing Machines

1 Answer

Panasonic washing machine model no NA F70B2 U12 problem just installed today shows U 12 when the cycle reaches Rinse and does not move on.


it is due to the magnet attached at the tip of the lid. the magnet acts as a sensor that give info whether the lid is closed or open. i got the same problem too but luckily the i found the magnet nearby the washing machine.

Dec 30, 2010 | Washing Machines

4 Answers

Got error code u11


u11 is not a valid error code - please recheck.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Mar 12, 2009 | Washing Machines

3 Answers

Panasonic washing machine stops prior to spin cycle


First my washer stopped working during the spin cycle, and some of the water still in the tub,i have to wait for about half an hour to have the whole process done after continuing the washing process,then after 2 weeks not doing any laundry, when i tried to switch on the on/off button,it doesn't do anything at all!I tried changing the plug fuse(thinking maybe it needed to be changed after 4 years using it) but nothing happened.please help me . TQ

Mar 20, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

441 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...