Question about Computers & Internet

1 Answer

I opened my samsung v20 laptop and now my mouse pad dont work. There is a cable loose but i dont no where it goes.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 38 Answers

Hello.. You have to put the ribbon cable back on to the mouse pad. there will be a socket under the deck lid where you need to reconnect the ribbon cable. there might be 2 little tabs on each side of the socket if there is, pull the tabs away from the socket carefully, slide the cable in the slot, and then slide the tabs back. that will lock the ribbon cable in. be careful. those sockets can get damaged easily. good luck !

Posted on Sep 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My mouse pad enter not working tel me


"My mouse pad enter not working tel me"

First off, always remember when describing a computer problem or anything else for that matter, more is better. That being said, it is very hard to diagnose an issue such as the mouse pad enter is not working; it could be that the laptop was dropped and something in the hardware is loose and not connecting, especially if this happens all the time no matter what program or software you are in.
I would recommend that if you come on here and see this post to add more detail in the comments section.

Oct 02, 2014 | Lenovo G500 59373043 Intel Pentium B960...

6 Answers

Good Evening. The problem appears to lie in my laptop mousepad, 2 days ago while writing a letter the cursor suddenly changed its appearance from a T like figure with crossbar at bottom too. changed to an...


Could you please supply me with your part number and serial number? I will check on your pc and will defiitely take care of this. Part number begins with PSAxx-xxxxxU.

Jun 15, 2008 | Toshiba Computers & Internet

1 Answer

I have a Samsung R700 laptop . The problem is when the laptop is plugged into power lead it works fine but when it is running off the battery the screen flickers then goes black but comes back on after you...


Your LCD screen's picture comes from a very thin ribbon cable which has either a) worked itself loose or b) worn out, either way you will need to undo the four screws at the front of the screen (usually covered with 4 rubber covers). Very carefully unclip the plastic surrounds and then check for the connecting cable. If it needs to be replaced you can ussually locate one from Ebay.

Feb 23, 2011 | Computers & Internet

1 Answer

Mouse quit working on my Lap Top it is a Aspire


First of all check whether the touch pad is lock (Fn+F7(?)). If you use an external mouse/ usb mouse, check usb cable connection, as long as you didn't drop it on the floor it should be ok. If the built in touch pad doesn't work, could be caused by ribbon cable connectivity that has dirt or moist. To fix it need to open the upper case

Apr 08, 2010 | Computers & Internet

1 Answer

Mouse pad not working


A mouse pad is a thing you put your mouse on....

now what you are talking about is your touchpad.

Check these first:

  • some laptops have a switch that turns off the touch pad (usually a button right on the topside of the touchpad)
  • did you reboot completely? full shutdown, then power on?
  • goto the device manager (with a usb mouse of course) and find the touchpad... delete the device... then reboot again it should try and find the touchpad and ask for the driver, point it to the directory that you have the driver located.
good luck!

Apr 21, 2009 | Computers & Internet

1 Answer

The mouse pad is locked. it works when the pc is started up. after the desktop loads , the mouse goes into lock mode.


Hello. For laptops there are several key combinations, FN+F1, F2 One of them disables/enables the mouse pad. Good luck!

Apr 15, 2009 | Computers & Internet

2 Answers

My mouse pointer is unstable. it automatically parks itself at the start button or parks itself at the top right hand corner of the screen & can't be seen in either position without a lot of sweeping...


IF IT IS WHEEL MOUS, THEN THE WHEEL OF MOUSE GONE OUT OF PLACE. CHECK IT BY OPEN IT.

IF IT IS OPTICAL MOUSE THEN IS IS MOST LIKELY GONE OUT OF ORDER. ANY HOW CHECK IT TO OTHER COMPUTER.

Nov 29, 2008 | Computers & Internet

1 Answer

Left mouse button and mouse pad sometimes stops functioning on the sony vaio vgn-ar51e


It's most likely a loose cable inside the notebook then makes contact intermittently. Or, your touchpad is faulty.

It might be worth having the machine looked at by someone certified to take it apart.

Sep 11, 2008 | Sony Computers & Internet

1 Answer

I have an ACER ASPIRE 4315 laptop. For some unknown reason the right mouse pad button no longer works. Can you please advise me how this might be fixed. The left mouse pad button works fine. When I say...


you may wish to go to the acer website and look up that model... download the driver for the touchpad and buttons again. reinstall that and see if it fixes the issue

Robert

Aug 29, 2008 | Acer Computers & Internet

1 Answer

My mouse pad in the middle, the curser buttons up and down do not work.


first check the mouse cable is attached correctly in to the port

if it is ok

take out the cable from the cpu and connect again and restart the pc

if it is a normal ps2 mouse try to open and take the ball in the mouse and clean it well

if it is not work try to attached a another mouse

Jul 28, 2008 | Acer Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98816 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...