- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Here is what is being said of this error on the forums:
Fixing this error is much easier as it looks. Unplug the printer
completely. Move the ink cartridge cradle gently to the left. Over to
the right at it's usual resting place you will see a small pad about 1cm
square. This pad and the area around should be covered with ink. Get a
microfibre cloth and press down on this pad - it's not fixed so should
come away with the cloth, otherwise use tweezers gently. Squeeze the pad
several times between your thumb and forefinger while inside the
microfibre cloth to remove ink build up. Then when not much ink comes
out on the cloth, clean the area in the printer around the pad so that
looks free from ink too. Then position the pad back in place, move the
cradle back into position, plug in and switch on - should work fine now.
But it's worth checking for any paper caught near the ink pad
Take the adapter back to the guys at radio shack, they should be able to find what they missed or did wrong the first time. I suspect the adapter is the power supply and plugs into the wall. That's the item that wouldn't let it turn on, it's either shorted or one of the wires are no longer connected.
get a q-tip and wet one end in water. run wet q-tip along head a few times. then take dry end and run along head again to dry it. then run wet end again on the absorber side of head. then dry with dry end. replace parts, do a deep cleaning, and try a test print.
If you have an old driver installed, remove it from your computer.
Visit a canon site , look for the download tab, enter your printertype and Operating system, look for your driver and download it.
After installation of the new driver : good luck :-)