Question about Candy CNW136 Front Load Washer/Dryer
It wont take the fabric conditioner
Try taking the soap dispenser draw out a give it a thorough clean inside and on the underneath of the drawer, then clean inside the machine where the drawer fits into. Sometimes a build up of detergent/softener can cause this.
I hope this helps
Posted on Jan 19, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 30, 2014 | Candy Washing Machines
It is possible that the machine does not start off the cycle because there are errors due to feedback from the inputs. For the program to start up the main program controller must initiate the INLET/MOTOR/DRAIN pump/ valve to open up and allow each function to be driven starting from the flow of water into the drum as also the drain valve to open to exit the water at the point of the program cycle. If this does not happen then the voltage at the valve/motor/pump must be checked or the fault relates to no voltage from the controller. This means the controller is a suspect.
Sep 26, 2012 | Candy CNW136 Front Load Washer/Dryer
Jul 23, 2009 | Candy CNW136 Front Load Washer/Dryer
May 25, 2009 | Candy CNW156 Front Load Washer / Dryer
May 23, 2009 | Candy CNW136 Front Load Washer/Dryer
Jan 10, 2008 | Candy CN146 Front Load Washer
948 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: