Question about Jenoptik JD 8.0 Z3 Digital Camera

1 Answer

I cannot unlock my SD card on my JD 8.0z3 sc Digital camera

I have inserted a new memory card without any success

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Jenoptik Master
  • 102,366 Answers

Look at your memory card. SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

Posted on Jan 04, 2013

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: SD Card gives "Ft" error message when inserted

does the sd card have a lock feature on it?

Posted on Aug 23, 2008

muntejaya
  • 10421 Answers

SOURCE: I lost my Jenoptic JD C 3.1 Digital Camera driver

Hello, kindly get it here : www.jenoptik.com/Internet_EN_Kamera-Treiber
downloadnew.org > Drivers > Scanner & Camera

Regards, Ja

Posted on Feb 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Who can repair a Gateway DC-T50


Refer to the manual page below - note the last 2 items
If you take the camera and the card to a sales outlet the assistants are usually helpful

Inserting an SD Memory Card(Optional)
All images and video clips taken by the camera can be stored in an SD (Secure
Digital) Memory Card. Even if the camera's power is OFF, the images saved in the
SD Memory Card are not erased. An SD Memory Card can be repeatedly read and
written. You may also expand the memory capacity up to 512MB so that you can
store additional images and video clips.
1. Make sure the camera is off.
2. Slide the battery/SD Memory Card cover in the direction of the [OPEN] arrow.
3. Insert an SD Memory Card :
The front side of the memory card (printed
arrow) should face towards the front side
of the camera.
If the card cannot be inserted, check the
orientation.
4. Close the battery/SD Memory Card cover.
To remove the SD Memory Card, make sure
the camera is off. Open the battery/SD Memory Card card cover. Press
lightly on the edge of the memory card and it will eject.
Note:
If the camera is powered-on without the card, the "NO CARD" message appears on
the LCD monitor.
To prevent valuable data from being accidentally
erased from an SD Memory Card you can slide the
write-protected tab (on the side of the SD Memory
Card) to "LOCK".
To save, edit or erase data on an SD Memory Card,
you must unlock the card.
MultiMedia Card (MMC) can not be used.
You need to format an SD Memory Card before using it in this camera

Feb 19, 2015 | Gateway DC-T50 Digital Camera

1 Answer

Memory card locked


SD and Micro SD memory cards SD and Micro SD memory cards has a small slide switch on the edge of the card, which write protects data on the memory card or add photos to the SD card. Slide the switch from the LOCK position to the UNLOCK position, which is furthest away from the contacts. ALTERNATE WAY TO TRANSFER PHOTOS TO COMPUTER
If your photos are stored on the memory card, then remove the memory card from the camera and insert it into an USB memory card reader. Connect this USB memory card reader and memory card into the USB port of your working computer. Your computer will see this as an USB Mass Storage Device or an external storage device; you can then open the folder on the memory card and copy the photos to your computer. Memory card reader is a handy device and is inexpensive. You can copy photos from other cameras and you can also download photos off your memory card to someone else's computer without the need of installing any programs.

Oct 19, 2012 | Nikon D3000 Digital Camera

1 Answer

When trying to playback photos from SD Card, the message "cannot playback image" is displayed. Happens when using more than one SD card, which rules out that it is the SC card that isn't working.


which rules out that it is the SC card that isn\'t working Not necessarily, switching SD memory card from one camera to another without formatting isn't going to happen. If the SD card was new and not formatted in the camera that it's going to be used in then there could be a lot of different errors occurring. Also if pictures were downloaded from the memory card to the computer and the card not formatted this will cause a problem as well. If you have been deleting the pictures files then again this could be a problem the card needs to be formatted. Another IF is if you downloaded pictures from the computer to the SD card and then put it back in the camera without formatting then it's not going to acknowledge the card. If you formatted the SD card in the computer then it's not going to work or work properly in the camera. Picture files can go from the camera to the computer but not back again because the computer operating system and software is not compatible with the camera firmware. It all comes back to format the memory card in the camera you are using it in before taking pictures.

Feb 08, 2011 | Canon EOS 550D Rebel T2i Digital Camera

2 Answers

Inserted 4 GB memory card. new camera trying to take a pic and I keep getting the message card protected.


Memory cards particularly SD or SDHC have an option to protect the files from accidentally deletion. This is done by moving the small part of the memory card to the 'lock or unlock' position. Try to look for this small switch on the side of your memory card.

Dec 26, 2010 | Vivitar ViviCam 35 Digital Camera

1 Answer

I have inserted a new PNY optima SC HC memory card and window in camera says "memory card error". Does the canon not take this card?


Correct. The A510 uses SD cards, not SDHC cards. While SDHC cards will fit into the slot, they are electronically incompatible and will not work.

Nov 02, 2010 | Canon PowerShot A510 Digital Camera

2 Answers

My Canon Powershot A560 memory card is locked and it is the camera doing it not the memory stick. When I turn on my camera I get an error message"memory card error" then when i press to view pictures it...


1

Turn the Canon Powershot A560 over so the bottom is facing up.
2

Locate the door on the bottom of the camera. The door is labeled "CARD/BATT. OPEN."

3

Place your thumb on the slider on the door. Push the slider up to unlock the door. Then, slide the door out to open it.
4

Find the SD card. Inside you will see four batteries and the tip of a small plastic disc. This plastic disc is the SD card.
5

Eject the sd digital memory card. To eject the card, gently push on it and then release the pressure. The SD card will pop out part way. Go ahead and pull out the card.
6

Turn the card so the writing is right-side up. On either the left or right side of the card, you will see a grove with a tiny plastic switch in it. If the switch is at the bottom of the groove, the SD card is locked.
7

Unlock the SD card. Using a fingernail, slide the switch to the top of the groove. The card is now unlocked.
8

Return the SD card to the camera. Place the card in the slot and push down until you hear a click. The card is now successfully reinstalled. Do not worry about inserting the card the wrong way, because it will only fit one way.

Nov 06, 2009 | Canon PowerShot SD750 / IXUS 75 Digital...

1 Answer

Locked card, not because of the switch


Hello

OK, if the memory card itself is locked, you might sometimes get this error code. All you need to do is to take out the memory card and switch the lever on the left side to the unlock.

6c99e31.jpg

If the error is still displayed after you did the above, you might want to try the card in another camera.

If the card works in another camera . the problem is with your card reader in your camera.

If you open you sd slot and look inside with a sharp light , you should be able to see on the left side of the slot there is a little copper or spring steel lever switch. This switch work as follows:

1. When no card is inserted / no write protection , the switch is open and thus the protection is off.
2. When locked card is inserted , the tab is depressed and tells the camera that the card is lock.

Contrary to popular belief ,the little tab on the sd card is not an electronic switch and does not physically influence the card operation itself. If you put a locked card into a camera without a sd lock switch , you would still be able to use the card normally.

It is incredible difficult to fix this switch because of space limitations in the sd card. Look into the sd slot and if you can see the switch , use a needle to pull the little tab down toward the base of the camera by about 2mm or until it works being careful not to bend it.

If this does not resolve your problem , there might be a short in the switch circuit and the camera will need to be disassembled to resolve this error. This should cost no more than $50.

Please feel free to contact me if you need further information

Kind regards
Andrea

Jul 15, 2008 | Samsung Digimax S500 Digital Camera

1 Answer

SD Card error


Hi, Since the SC card is properly inserted, then it is possible that you have to format the memory card. Go to the camera's utilities/menu and look for the format function. Perform format operation on the card. Hopefully this should revive/restore the card to an operational status. This of course would erase all data/photos inside the memory card. Good luck and kind regards.

Sep 04, 2007 | Vivitar ViviCam 3746 Digital Camera

Not finding what you are looking for?
Jenoptik JD 8.0 Z3 Digital Camera Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenoptik Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Jenoptik Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...