Question about Venta Humidifiers

Open Question

Venta 350 humidifier working poorly

I haave a Venta Sonic 350 humidifier that makes a lot of noise and produces little mist, unlike when I first put in a new ''module'' (which is supposed to last 1000 hours). Any ideas on how to solve this? Anyone know where I can get a user manual for a Venta VS350 (I have emailed the Venta company in the U.S. and not received any response. Thanks

Posted by on

1 Suggested Answer

  • 1 Answer

SOURCE: Venta Sonic VS205 Humidifier turns

If you see mist in unit and not coming out fan motor in base of unit bad. Four screws in base and fan unplugs

Posted on Dec 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a sunbeam sul2512um ultra sonic humidifier . I have had it for a less than a year . When I turn it on it makes a very loud noise where the mist comes at the base . Is there anything I can do to...


unfortunately thats the noiise a humidifier makes perhaps there are less noiser models on the market now you know as time goes by so technology becomes more amazing.

Nov 10, 2014 | Humidifiers

1 Answer

Humidifier will produce mist for a min then stop If you look you can see it producing mist within but it will not come out of the top Walgreens cool mist ultrasonic humidifier


I have had times where my Crane humidifier won't produce mist if I haven't turned it on for several days (4+) or more. The water that sits in the reservoir may develop a film on the ultrasonic element which inhibits the creation of the mist to come out the top of your humidifier. I would lift off the tank and empty the reservoir. Then VERY GENTLY with a piece of paper towel, wipe the ultrasonic element (looks like a disk the size of a quarter at the bottom of the reservoir) to clean off any film. Then replace the tank and let the reservoir fill up the tank and try it again.

If your humidifier runs properly for a minute and then makes a whirring noise and goes silent (like the motor stopping), then it's a motor problem. The humidifier motor may have gone out of alignment due to bumping or rough handling of the humidifier when cleaning or emptying it. If that is the case, you will have to empty the humidifier reservoir, unscrew the base, and find the screws holding down the motor and check for misalignment. Loosen them a little and put it back together and try again.

Best of luck
thebqe

Feb 13, 2014 | Humidifiers

1 Answer

Venta Sonic VS205 Humidifier turns and has the green light, makes a buzzing sound, but no mist is coming out.


If you see mist in unit and not coming out fan motor in base of unit bad. Four screws in base and fan unplugs

Aug 20, 2011 | Venta Airwasher VS 207 3.7 Gallon...

2 Answers

Venta 205 no mist


Throw the unit out - it's garbage

Nov 10, 2009 | Venta Airwasher VS 207 3.7 Gallon...

1 Answer

Venta humidifier is not humidifying much.


Buy a new filter cartridge. www.ventahumidifiers.com

Mar 16, 2009 | Venta Airwasher VS 207 3.7 Gallon...

2 Answers

The humidifier has stopped producing mist


boogiecheck is right, the one pictured uses natural evaporation( no white dust) I just ordered one from abdistrsupport@gmail.com and mine works great. I own 3 total.

Dec 07, 2008 | Venta - Airwasher LW44 Humidifier

4 Answers

Venta 207 digital humidifier


Caring For Your Venta-Sonic Humidifier
IMPORTANT!
Always unplug the unit before cleaning!
When to Clean Your Humidifier
 Clean your humidifier weekly or more often during heavy use, depending on your
individual water quality. Clean your humidifier before storing and after long periods
of storage.
 When cleaning the inside of your unit, keep water away from the air outlet. Exterior
may be wiped with a damp cloth when unit is off and unplugged.
Cleaning the Oscillator and Water Sensor
 Turn off the unit and unplug power cord. Remove tank from base and empty
reservoir in base. Use cleaning brush provided in base to clean off mineral deposits
and sediment from oscillator and water sensor. Do not scrape or clean with tools
that have metal parts. Be careful to not damage the surface of the oscillator.
ATTENTION: Damage to the oscillator may cause the unit to not work properly.
 The oscillator (ultrasonic transducer) is highly sensitive. Keep this important part
clean and treat gently. Do not touch the oscillator while the unit is operating.
 Do not use soap, cleaning agents, detergents, or other chemicals for cleaning the
tank and humidifier.
 After cleaning fill water tank (see instructions above) and return tank to base.
Storing the Venta-Sonic
Switch off and unplug power cord from A/C outlet. Empty remaining water from base
and tank. Clean tank and unit (see for instructions above). Make sure all parts are
thoroughly dry—allow at least 24 hours to dry. Leave the filling cap of the tank
loosened. This will keep the cap and gasket from sticking together. Pack Venta-Sonic
in original packaging and store in a cool and dry place.

You can find your manual at this link:
http://www.venta-sonic.com/pdf/vs207manual.pdf

Good Luck.

Apr 03, 2008 | Venta VS 100 Humidifier

1 Answer

Noisy ultrasonic humidifire


The grey circle (diaphram) needs replacing. Try Maplin electronics.

Mar 31, 2007 | Swiss Air-O- 7135 Warm Mist Antimicrobial...

Not finding what you are looking for?
Humidifiers Logo

Related Topics:

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Venta Humidifiers Experts

paulcarew

Level 3 Expert

1898 Answers

Mack Baxter

Level 3 Expert

379 Answers

Ken Thomas

Level 2 Expert

118 Answers

Are you a Venta Humidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...