Question about Tyan Computers & Internet

Open Question

Tyan tempest errorcode ff - Tyan Computers & Internet

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ProsunPal
  • 60 Answers

SOURCE: screen goes blank after 5 minutes (tyan tempest s5380)

Try booting without expansion cards. Watch your processor temperature carefully. I guess you have problems with processor. Try another processor if you have around. Keep posting.

Posted on Feb 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset the password on a Tyan m3296 SMDC


contact Tyan and request support, just say that the hardware was in a machine you were given. It might be that that there is a generic password built int the firmware. Such a practice is common on most electronic equipment, hope you are lucky. Otherwise look for an answer on Tyan forums or Tom's Hardware

Mar 14, 2015 | Tyan Computers & Internet

1 Answer

Looking for suppliers for tempest computers


What is you location ?
Search the internet under 'Tempest computers'

18.December.2014

Sep 10, 2014 | Computers & Internet

1 Answer

Code ff on boot s4881g2nr


This is usually the hard drive is bad.

Apr 23, 2014 | Tyan S4881G2NR Motherboard Server Boards...

1 Answer

Tempest i5000XT installation


Do you have the disks to install the drive, it is blank so the machine will not see it. Use the back up disks to laod the systems operating program.

Mar 21, 2014 | Tyan Tempest i5000XT Motherboard

1 Answer

Hi, I am trying to resolve a problem I am having with my Tyan Tempest i5400PW motherboard. My first attempt gave me the following beep sequence : long beep, followed by 3 short beeps, and the same pattern...


Hi.

Try clearing the CMOS by either the CLR_CMOS jumper which should be marked on the motherboard or remove the power cord from the PSU (power supply unit) and then take out the BIOS battery for 20 minutes. Put the battery bac k in and see if the motherboard will fire up and display.
While you wait make sure the CPU's (both of them) are seated properly and also make sure that the RAM is seated properly in the slots.



Good luck.

Jun 22, 2011 | Tyan Tempest i5400PW (S5397AG2NRF)...

1 Answer

Need a schematic for this motherboard tyan tiger 133 (1834)


I found the information that you are looking for and you will find it here: http://www.tyan.com/archive/products/html/tiger133.html. This page on Tyan's Web site will provide you with a color image of the mother board (with slots labeled) along with the specs for the board. I hope this is exactly what you need.

Thanks for using Fixya and please rate my solution.

IT_GURL :)

Mar 27, 2009 | Tyan Tiger 133 S1834 Motherboard

1 Answer

PC not Booting up


Dissemble your whole PC. Clean thoroughly. Check BIOS battery with a multimeter. Try to boot without expansion cards. Change RAM if you have extra one. There are so many procedure you can take. Keep informing.

Feb 22, 2009 | Tyan Tempest i5000PX (S5380) (S5380G2NR)...

1 Answer

Screen goes blank after 5 minutes (tyan tempest s5380)


Try booting without expansion cards. Watch your processor temperature carefully. I guess you have problems with processor. Try another processor if you have around. Keep posting.

Feb 21, 2009 | Tyan Tempest i5000PX (S5380) (S5380G2NR)...

1 Answer

Tyan S5396 and Thermaltake 1500W


tyan i5400xt.. to test for ground.. pull the board from the chassis and test with a different known good power supply

if the boot works... then you have a power supply issue...

does the board have a post code lighted signal ???

if so.. a bad power supply should goto FF error code

verify you have enough power on the cpu rail with your power supply specifications also

be sure you have all cables 4 pin 8 pin and 20/24 pin connections done correctly.. lastestly check if the board is touching the chassis edge anywhere... could cause a ground

also take and loosen all the MB screws from the chassis.. just let it hang there this will test the grounds needs the screw connections

mark@omces.com

tyan specialist

Oct 31, 2008 | Tyan S5396A2NRF Dual LGA771 XEON5000 5100...

1 Answer

Manual to tyan s239001


Hi,

Try This link to Tyan Archive Files.
http://www.tyan.com/archive/support/html/manuals.html
I think your board will be here.
Trinity KT Manual under Socket 462/A ( AMD Athlon/MP/Duron )

Mike @ Compurepair.

Mar 12, 2008 | Tyan Thunder n6650W Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tyan Computers & Internet Experts

Jerry Umali

Level 3 Expert

979 Answers

Robert Graf

Level 2 Expert

238 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Are you a Tyan Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...