Question about Radio Communications

1 Answer

NOT RECEVING OR TRANSMITING

TURNS ON BUT CANT HEAR ANY ONE OR TRANSMIT

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 66 Answers

Can you see the s-mete if it has one moving up and down on any channel? Do you hear any audio at all? could be a couple of things. Bad mic switch or mic cable, bad antenna or coax, bad audio amp. To check the audio amp plug in a speaker to the PA jack, put the PA switch on PA then press the mic to talk. If it works the audio is fine the mic is good and the mic cable is good. Noiw plug the speaker into the speaker jack, do you hear anything? If not then your antenna or coax has a problem, fix or replace antenna or coax.

Posted on Jan 04, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a icom ic-v8000 not transmitting or receving there is no short voltage everything looks perfect. when you key the hand held microphone all you hear is tweet,tweet, tweet......


The IC-V8000 is a high power (75 watts) 2 metre radio, it will draw about 15 amps on transmit. Also you might want to make sure your antenna SWR is low about 1.5:1. If you are not receiving anything at all I suspect you may have an antenna issue and this will also effect your transmit as well as the radio will protect its self by reducing the output to almost nothing if the antenna has a high SWR. If you don't have an antenna analyzer check with another amateur radio operator they may know someone who does. Your local amateur radio club most likely will have someone who help you solving your antenna problem.

Jun 29, 2017 | Icom Radio Communications

1 Answer

Cobre 18 wxstII


Check and be certain you are not on the weather band. if you are you can not transmit and if you are not set to the proper weather station you will hear nothing. Sound like your problem.

Apr 12, 2014 | Cobra Radio Communications

1 Answer

Not able to finish transmiting.


1 check and clean mic switch
2 check and repair wires in mic plug
3 if preamp mic replace battery

Jul 03, 2009 | Radio Shack TRC-503 CB Radio

1 Answer

Internet conection via linksys gateway through netgear router


Not totally for sure but i am myself running linksys. if its a new pc you must first configure your settings in order to hook up it up. on ur pc you should have networks first try running a land line to it and see if you can connect if you have multiple routers its very easy to make a mistake with the wiring.

Apr 22, 2009 | Computers & Internet

1 Answer

TK 380 not transmiting


Its most likely was programmed with a rx but no tx. Meaning it can recieve but not transmit, you can fix this with the programing software.

Jan 25, 2009 | Kenwood KNB-17AM, TK-280, TK-290, TK-380,...

1 Answer

Dialtone problem


This sounds like a radio transmiting problem. This problem shows up first as "choppy transmit" where custimers complane of you sounding choppy or "under water". Google "KX-TGA400B choppy transmit" to find out more.

Jun 04, 2008 | Panasonic KX-TG4000B 4-LIne Multi-Handset...

1 Answer

How to prograqm a motorola mts 2000 flashport?


1. Program the ABC switch as zone select.
2. Program each 'personality' into the proper zone (eg A1, A2..., B1, B2..., C1, C2..., etc)
3. Load the codeplug into the radio.

May 27, 2008 | Motorola HT1000, MTS2000, MTX8000/9000...

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1654 Answers

Brad Brown

Level 3 Expert

16181 Answers

Mike Charette

Level 3 Expert

1795 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...