Question about Network & Wireless Adapters

1 Answer

Wi fi not working

Hi frens
i m too facing the same problem. I have Compaq C797VU laptop . OS is windows XP . My wifi is disabled . I have tried all the option i can to get it enabled but i could not .

Plz help me out to solve this problem .

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I hope your laptop purchase comes with a warranty. You may need to bring your laptop to the nearest Compaq service center.

Posted on Jan 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stopped to connect to wi fi


there may be two reasons they are 1) wifi is disabled on your computer to enable it go to run --> and type in services.msc and click on ok scrool down and check for "wireless zero configuration"and click on restart the service 2) You might be disable the wifi on your mechine.

Mar 18, 2010 | Trendware TEW-424UB (0710931502572)...

1 Answer

Wireless network on and off all time


Plz check ur signal strength first. Second u can check with configure ur wirless adapter properties with static speed (802.11b or 11Mbps).


u can check ur wireless adapter on ur bro's laptop, disable his WiFi button & connect his laptop through this wireless adapter to samsung modem.

If the problem remain same on ur bro's laptop then ur wireless adapter having some problem.

PLZ GIVE RATING BY YES or NO.

Mar 20, 2009 | SMC EZ Connect g SMCWUSB-G (SMCWUSBG)...

1 Answer

Hi, I have an old acer laptop and my wife communicates with me on it using broadband and a router with a usb pick up. I have returned home and have a new acer laptop with wireless LAN already installed. It...


Youe broadband router is working ok with the broadband cable.So it is configured with the broadband cable.Now,to work with the wireless internet,you have to configured the wi-fi router to work internet.You can see the wi-fi connection but unless & untill you will configure wi-fi router it must not work or if before it was working with the wi-fi then you can check the wi-fi router setting because it might change by mistake.Surely it will work after configurating wi-fi router.

Jan 03, 2009 | Network & Wireless Adapters

1 Answer

Wireless internet network


hi dear

try this

  1. Before you attempt to use any Wi-Fi network, find out what the SSID, Channel, Mode and WEP key are. Some Wi-Fi locations do not require a WEP key. Many Wi-Fi providers have this information on their web site or when you purchase access you will be provided the information.
  2. Ensure you have a firewall program installed and running. This will protect your data.
  3. Start up your laptop and once booted, look for the Wi-Fi network icon in the bottom right of the screen.
  4. Click on the Wifi Connection icon on bottom right of screen and you should see a window that indicates connection, strength and duration. Click on the Properties tab.

  5. wirelessnetworkscreenbl.jpg

  6. The next window will show the type of networking card installed. Click on the Wireless Networks tab.

  7. 02ee437.jpg

  8. Once the Wireless Network Connection Properties window is open you will have two options depending on how you set up your laptop.
    • If you do not see any networks listed in Preferred or Available networks, you will have to manually add the SSID. Click on Add. You will have to enter the SSID and WEP key (if required). Click OK and you should then see the network you just added in the Available networks box.

    • 4d25eb5.jpg

    • If you see the correct SSID showing in the Available Networks, then you need to click on Configure in order to enter the WEP key if that is required.

    92752af.jpg

  9. In the next window, enter the SSID for the Wi-Fi network you want to access. Make sure you do not have CAPS lock or NUM lock while entering the information. If a network key is required, click on "Data Encryption and then enter the Network key you have been provided with. Again make sure you do not have CAPS or NUM lock on. Click OK when entered. If you have entered the key incorrectly a message will pop up and you will need to re-enter the key.

  10. fccfda9.jpg

  11. Next go to Start - and where it says Connect To click on that and you should see choices like in the graphic below. Click on Wireless Network Connection and it should work.

34b0a7b.jpg

There are occasions when the connection doesn't work, in these cases check your firewall software and make sure it allows you to connect to the Wi-Fi network. To check this, disable your firewall software and check the connection again. If you can connect with the firewall program disabled, you change your settings. If your firewall program is not the problem check the SSID and WEP key information that you entered. Both of these are case sensitive. If you had obtained SSID information from the Internet, check with someone in the establishment to see if the SSID has been changed.

oke post in me back

i hope this usefull for you


thanks


cropp

Jun 28, 2008 | Intel Network & Wireless Adapters

1 Answer

Disconnected wireless


hi dear

try this

  1. Before you attempt to use any Wi-Fi network, find out what the SSID, Channel, Mode and WEP key are. Some Wi-Fi locations do not require a WEP key. Many Wi-Fi providers have this information on their web site or when you purchase access you will be provided the information.
  2. Ensure you have a firewall program installed and running. This will protect your data.
  3. Start up your laptop and once booted, look for the Wi-Fi network icon in the bottom right of the screen.
  4. Click on the Wifi Connection icon on bottom right of screen and you should see a window that indicates connection, strength and duration. Click on the Properties tab.

  5. wirelessnetworkscreenbl.jpg

  6. The next window will show the type of networking card installed. Click on the Wireless Networks tab.

  7. 02ee437.jpg

  8. Once the Wireless Network Connection Properties window is open you will have two options depending on how you set up your laptop.
    • If you do not see any networks listed in Preferred or Available networks, you will have to manually add the SSID. Click on Add. You will have to enter the SSID and WEP key (if required). Click OK and you should then see the network you just added in the Available networks box.

    • 4d25eb5.jpg

    • If you see the correct SSID showing in the Available Networks, then you need to click on Configure in order to enter the WEP key if that is required.

    92752af.jpg

  9. In the next window, enter the SSID for the Wi-Fi network you want to access. Make sure you do not have CAPS lock or NUM lock while entering the information. If a network key is required, click on "Data Encryption and then enter the Network key you have been provided with. Again make sure you do not have CAPS or NUM lock on. Click OK when entered. If you have entered the key incorrectly a message will pop up and you will need to re-enter the key.

  10. fccfda9.jpg

  11. Next go to Start - and where it says Connect To click on that and you should see choices like in the graphic below. Click on Wireless Network Connection and it should work.

34b0a7b.jpg

There are occasions when the connection doesn't work, in these cases check your firewall software and make sure it allows you to connect to the Wi-Fi network. To check this, disable your firewall software and check the connection again. If you can connect with the firewall program disabled, you change your settings. If your firewall program is not the problem check the SSID and WEP key information that you entered. Both of these are case sensitive. If you had obtained SSID information from the Internet, check with someone in the establishment to see if the SSID has been changed.

oke post in me back

i hope this usefull for you


thanks


cropp

Jun 24, 2008 | Microsoft Ethernet MN-120 Network Adapter

1 Answer

Wireless Home Network with 2wire modem


hi dear

try this

  1. Before you attempt to use any Wi-Fi network, find out what the SSID, Channel, Mode and WEP key are. Some Wi-Fi locations do not require a WEP key. Many Wi-Fi providers have this information on their web site or when you purchase access you will be provided the information.
  2. Ensure you have a firewall program installed and running. This will protect your data.
  3. Start up your laptop and once booted, look for the Wi-Fi network icon in the bottom right of the screen.
  4. Click on the Wifi Connection icon on bottom right of screen and you should see a window that indicates connection, strength and duration. Click on the Properties tab.

  5. wirelessnetworkscreenbl.jpg

  6. The next window will show the type of networking card installed. Click on the Wireless Networks tab.

  7. 02ee437.jpg

  8. Once the Wireless Network Connection Properties window is open you will have two options depending on how you set up your laptop.
    • If you do not see any networks listed in Preferred or Available networks, you will have to manually add the SSID. Click on Add. You will have to enter the SSID and WEP key (if required). Click OK and you should then see the network you just added in the Available networks box.

    • 4d25eb5.jpg

    • If you see the correct SSID showing in the Available Networks, then you need to click on Configure in order to enter the WEP key if that is required.

    92752af.jpg

  9. In the next window, enter the SSID for the Wi-Fi network you want to access. Make sure you do not have CAPS lock or NUM lock while entering the information. If a network key is required, click on "Data Encryption and then enter the Network key you have been provided with. Again make sure you do not have CAPS or NUM lock on. Click OK when entered. If you have entered the key incorrectly a message will pop up and you will need to re-enter the key.

  10. fccfda9.jpg

  11. Next go to Start - and where it says Connect To click on that and you should see choices like in the graphic below. Click on Wireless Network Connection and it should work.

34b0a7b.jpg

There are occasions when the connection doesn't work, in these cases check your firewall software and make sure it allows you to connect to the Wi-Fi network. To check this, disable your firewall software and check the connection again. If you can connect with the firewall program disabled, you change your settings. If your firewall program is not the problem check the SSID and WEP key information that you entered. Both of these are case sensitive. If you had obtained SSID information from the Internet, check with someone in the establishment to see if the SSID has been changed.

oke post in me back

i hope this usefull for you


thanks


cropp

Jun 18, 2008 | Network & Wireless Adapters

1 Answer

Problems with wifi lan configurantion.


hmmm... is the wireless card listed in the device manager at all? even as a yellow question mark?

do you have a USB wifi adapter you can test on this computer?

Mar 29, 2008 | Acer InviLink 802.11b (91.49C10.002)...

1 Answer

About wi-fi


Windows XP has a built in wifi configuration tool, previous versions of windows dont have this feature. But if you were to buy a wireless card it comes with software for wireless to work on all versions of windows from 98 - XP most if not all new laptops have wifi built in & that will be able to share your broadband connection through the netgear router. You can configure the laptop & pc to share files & printer between each other, easy way of doing that is by using the wireless network setup wizard which can be found in Start -> All Prograns -> Accessories -> Communications -> Wireless Network Setup Wizard.

Feb 10, 2008 | Network & Wireless Adapters

Not finding what you are looking for?
Network & Wireless Adapters Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Network & Wireless Adapters Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Justin
Justin

Level 3 Expert

2072 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...