- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
DG31PR Motherboard has Intel 3 Series Chipset and you have to
install the chipset drivers, which would install the PCI Drivers
as well. Please visit the link given below, download the chipset drivers
and install them. Intel DG31PR Chipset Drivers The above drivers support Windows 7, Windows 2000, Windows XP Home Edition,
Windows XP Media Center Edition, Windows XP Professional x64 Edition and
Windows XP Professional
Please select your windows system. And unzip the file before you can use it:
A 1-2-2-3 beep code pattern means that there has been a BIOS ROM
checksum error. Literally, this would indicate an issue with the BIOS
chip on the motherboard. Since replacing a BIOS chip is often not
possible, this Phoenix BIOS issue is usually corrected by replacing the
Your not going to be able to update the BIOS without having XP installed on the computer. I had the same problem myself as a motherboard i had would not update with Win 7 installed. If you have a spare hard drive and an XP install disk then i recommend installing XP on that and then download the exe BIOS update file and run it from within Windows to update the BIOS. After that just turn the PC off, put back your Win 7 hard drive and your good to go.
Gateway are most likely wrong. These Gateway cp's usually have a motherboard failure which stops the cpu socket working, replacing the motherboard is a far cheaper option than buying a new pc, restore windows using my rstore disk which uses your registered version of XP. You could put the hdd in a dell computer, set the jumper omn the back to secondary master or slave of either the primary master ( C:\) or the secondary master.Then copy the files you wnt to an external source or the dell pc.