- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
As far as I nkow, you need to contact Kenwood with the radio serial number to get the unlock code. In the past, they would not give it to you without giving them a special code from a card that came inside the package. You can always try though, give them a call, the number is on their website.
if there is a reset button, try pushing that. if there isn't try disconnecting power to the radio for a few minutes. also try checking the speakers to see if they are shorted out, or if the speaker wires are shorted to ground or have any bare wires.
The easiest way is to purchase an installation kit that is matched to your vehicle, and comes with a pigtail plug that inserts directly in to your existing radio connector, and the pigtail wires match up color for color to your new unit
4" x 6" Kick Panels
Left Front (+)
Left Front (-)
Right Front (+)
Right Front (-)
6" x 9" Rear Deck
Left Rear (+)
Left Rear (-)
Right Rear (+)
Right Rear (-)
No ur radio is fine to fit the wiring harness into ur dodge the wiring has been crossed so it wont work, if u go 2 the Kenwood US site and down load the KDC MP 228 manual it has a good wiring dirgram and with a bit of work u can work out what goes where :0 Hope this helps