Question about Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

1 Answer

Need directions I want to use my son's F6030 900 Hoover Steamvac Widepath, but he did not give me the directions. Where can I find them on the web?

Posted by on

  • vowinckel Feb 12, 2009

    While moving, we lost the instruction manual for our Hoover
    Widepath SteamVac #F7425900, Can you help please?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 294 Answers

This is an older model Steam Cleaner. The upper tank, fill with hot tap water up to the fill line, then add 5 ounces of carpet solution to the water using the upper cap to measure. Make sure the lower letank is secured and turn it on, tilt the handle back, pull trigger to release solution to floor going forward, then release when pulling back slowly to extract. I am not sure if the manuals are available online, however you may be able to locate a Hoover dealer which may have a digital copy. They can be found through the hoover.com

Posted on Jan 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Attach the hose to a "hoover f7425 900 steamvac v2 widepath


click here> http://hoover.com/file/670/ for the manual it will give you full instructions how to attach the hose

Sep 25, 2013 | Hoover F7425-900 SteamVac V2 Widepath...

1 Answer

I need a diagram to install a turbine in a hoover steam vac model f7425-900


If you give me your name, address, city, state and zip code
I can send it to you in the mail.

Apr 13, 2010 | Hoover F7425-900 SteamVac V2 Widepath...

1 Answer

The scrub brushes dont spin anymore


The brushes are turning by an air driven turbine. The turbine has a pivot bushing made of steel inside of it that gets rusty because of the water that is running through it. The turbine gear will have to be replaced. You can access the turbine gear by removing the hood. You can find a genuine hoover replacement part by following the link below. Just find the model number of your Steamvac.

http://www.usavacuum.com/Hoover-SteamVac-Parts-s/105.htm

Oct 23, 2009 | Hoover F7425-900 SteamVac V2 Widepath...

1 Answer

Where can i get a clean water and solution tank. mine broke just after my warrenty ended


Try hoover web site or ebay google hoover solution and water tank parts information should pop up

Oct 04, 2009 | Hoover F7425-900 SteamVac V2 Widepath...

2 Answers

We need the OPERRATING MANUAL for Hoover Steamvac 6020-900


download the manual for hoover F5810 at hoover.com. it's the same for your model.

Jan 20, 2009 | Hoover F6020-900 SteamVac Upright Vacuum

1 Answer

Hoover widepath steamvac


One cause is the filter in the dirty water tank lid is pushed up too high, it needs to have a gap of 1/4 in or so. So check it, if it is up all the way, pull it down some.

Jan 15, 2008 | Hoover SteamVac F5914-900 SpinScrub...

2 Answers

Hoover Steamvac Widepath 6500 leaks


You didn't give your model number, but if this is a V2, you may have a crack in the tank, alot of times it is underneath the seal on the bottom. Or the plunger at the bottom of the tank is stuck open or missing.

Dec 02, 2007 | Hoover F7425-900 SteamVac V2 Widepath...

Not finding what you are looking for?
Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum Logo

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Roger Potts

Level 3 Expert

694 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...