Keyboard plug in not working

Yes ,this foxconn motherboard will support the above mentioned
processer. Please check the below link.

Foxconn

Thanks for using Fixya.

http://www.pchelpforum.com/threads/foxconn-672m01-8ksh-front-panel-connections.52033/

Verify that the volume is not set to mute. If possible verify that the Front Audio is disable when it is not connected to the front audio panel. To disable Front audio as below: pin 5,6 and pin 9,10 should be short with jumper.

Hello Dark 616!
Foxconn has drivers for the 45CMX motherboard available for download on their website. The link for your motherboard is 45CMX

wires should be on the tower,were they go should be on the board.
there probably know where near the acctual pins,look all over the board with a tourch.
forget that here download the manual

ok first you wont to take cover of case then copy down the writing on it for example on the board mine says

foxconn 45cmx

so the brand is foxconn and the board name is 45cmx

you need to look on the manufactorers website and look for the instructions there are some pictures of them on google images

if you can't find it mail the company names on the board for me for example it would be foxconn

Befor installing Audio install Below update package for audio.
then install Audio Driver

http://download.cnet.com/kb888111-exe/3000-2110_4-104699.html

i think it solves u r problem

RATE ME!

GO to your Start menu and click on microsoft updates and when it pulls up internet explorer click on the tab that says hardware and check the box and it'll install the drivers for you

I' m not sure but i think that you can do it. Ask in shop.

Hi aligmatos, it is suggested that you use a 24-pin main power connector if you are going to fill up the motherboard & use a PCI-Express graphics card & Dual-Core Pentium CPU. The power supply should not be less than a 450W for this board, 550W would be better. You can use a 20-pin main connector but its not suggested. Make sure you connect the 4-pin 12V power connector. Your motherboard should still function with a 20-pin main power connector. Again I would not suggest it.
Main web site for Foxconn 45CM-S
http://www.foxconnchannel.com/product/Motherboards/detail_overview.aspx?ID=en-us0000328

Search preformed for Recommended power wattage for foxconn 45CM-S motherboard.
http://www.google.com/search?hl=en&q=Recommended+power+wattage+for+foxconn+45CM-S+motherboard&btnG=Search

Good luck aligmatos!
Mike