Question about Rado Original Hard Metal Silver Dial Automatic R12637113 Watch for Men
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: I have a Rado DiaStar
Hears how i do my watch, i have the same watch as you.Just make sure nothing is displayed on the clock face by turning the winder, ie NO digital time, NO daul time, NO alarm, NO stop watch etc, Pull out the winder(crown) and adjust the hands to the time you require by spinning the winder.(Gentley for mins and fast for hours) The digital clock will display wilst doing this, but not change the time.handy if you want to sync both clocks.Push the winder back in at the time to sync and the digital display will go out, then spin the winder again if you want to display the digital features. I hope this helps, please post if it does, Maurice Chevalier- Herts
Posted on Nov 27, 2008
The shaking is not the best way to restart the automatic watch as it puts slight strain on watch balance wheel and hairspring (most delicate part in watch).
As watch balance wheel is positioned paralel(leveled) to watch dial, you have to spin your watch back and forth a few times quite quickly.
(Imagine you are turning steering wheel in your car- thats the right motion). Before doing that wind up your watch a few times manually.
Right after doing that observe the seconds hand and if it is ticking just a little bit or ticking back and forth and then stops- your watch has jammed gear train and this is the reason why it stops.
If you don't have seconds hand- after shaking your watch listen for ticking and again- if it stops after short run, the gear train is to blame. In this case you will need watchmakers help as special skills and tools are needed to sort this out.
Do not forget to rate, please.
Posted on Jan 10, 2009
SOURCE: rado diastar swiss 196-0364-3
I bought the same watch recently and have the same problem. The hours can be adjusted in the dual time zone by looking up the manual, but the minutes stay put. I can't bring them to blink so that these could be adjusted. Any ideas? I sent a mail to Rado through their website but no answer.
Posted on Dec 06, 2009
That links are most likely ceramic! Take your watch to a reputable watch repair shop...they break very EASY! Make sure they know what they are doing!!!!
Posted on Jan 16, 2010
Brand new men's cost around $1200 - $1500, ladies - $1000 - $1400, depending on materials used. Hard to say about used ones, as it depends on the wear and tear, overall look and performance. Rate me, plz.
Posted on Feb 18, 2010
Tips for a great answer:
May 14, 2015 | Rado Watches
Jan 22, 2015 | Rado Watches
Jan 21, 2013 | Watches
Jun 09, 2011 | Rado DiaStar watch #R20282192 Watch for...
Mar 01, 2011 | Rado Diastar Classic 300M R12639023 Watch...
Feb 23, 2011 | Rado Diastar Anatom Jubile watch
Jun 21, 2010 | Rado Diastar Anatom Jubile watch
Oct 20, 2009 | Rado Coupole R22531723 Watch
Jan 06, 2009 | Rado Coupole R22531723 Watch
Nov 01, 2008 | Rado Diastar Anatom Jubile watch
15 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: