Question about Office Equipment & Supplies
Stop printer beep
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had a similar problem. make sure the fuser is the same voltage as the printer. 110v printer needs a 110v fuser. easy way to tell. White barcode sticker it is a 110v. Red or Pink then it is a 220v.
Posted on Aug 27, 2009
Faded prints are possible due to following reasons.
1. Fogged red mirrors inside the Laser box
2. Alignment of the Laser Box
3. Calibration Problem
4. Cleaning Problem
I will guide you with simple steps first, if this dosen't work working with laser box is little tough & time consuming, hence will describe later.
To Calibrate the colors, Press the 'Green Button' in the front panel, use the arrow keys to navigate through menu.
Select 'System Setting' by pressing the green button again, navigate using the arrow keys and select the 'Calibrate Color', select green button to select and confirm to 'Calibrate Now'. This will take few minutes.
In addition to that, to clean the paper path, select the green button and use the arrow keys and navigate thru' menu and select 'Service'. select using the green button and navigate through menu and select cleaning option. This will take few minutes.
Try printing some documents and check whether you have fixed. If you have not got the original print quality, Let know to guide you more technically.
Posted on Jun 18, 2010
SOURCE: sir, i have hp laserjet
this all i manage to find for hope it helps
Turn off then on
The printer has experienced an internal error. The printer may experience one of the following errors:
55.0 DC controller communication error
55.0601 DC controller NVRAM data error
55.0602 DC controller NVRAM access error
55.1 DC controller memory error
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the printer to initialize.
If a surge protector is used, remove it. Plug the printer directly into the wall socket. Use the power switch to turn on the printer.
If the message persists, contact HP support.
You need to first check the connection between the dc controller and the formatter and if the connection is fine you need to replace the dc controller.
Posted on Dec 22, 2010
Tips for a great answer:
Jul 08, 2015 | Office Equipment & Supplies
Nov 18, 2014 | HEWLETT-PACKARD Color LaserJet CP5225...
Nov 17, 2014 | HP LaserJet Office Equipment & Supplies
Apr 15, 2014 | HEWLETT-PACKARD Color LaserJet CP5225...
Aug 19, 2013 | HEWLETT-PACKARD Color LaserJet CP5225...
Apr 20, 2013 | HEWLETT-PACKARD CP5225dn Laser Printer
Jan 10, 2009 | HP OfficeJet t65xi All-In-One InkJet...
Dec 20, 2007 | Canon BJC 80 InkJet Printer
43 people viewed this question
Usually answered in minutes!