Question about Prestige Remote Start

Open Question

I have the prestige 5BCR07 remote start, how can I change how long the car warms up before shutting off? right now its set for 10 minutes

I currently start my car at least 30 minutes prior to leaving out to head to work, however the increments are only set for 10 minutes each so that causes me to have to set it 3xs in order to ensure that my car is warmed before heading to work. Can you tell me how I can change the length of time the car stays on?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 13 Answers

SOURCE: prestige aps-57 remote start...car won't start

Hello hope this can help you. First check the starter wire, it is tan/lt blue located at the ignition harness. usualy during installation of the remote start system this wire is cut leaving you with two ends. one wire is coming from the ignition switch the other is going to the starter. the brain of the alarm hooks into both of these wires. if the repair man cut the wires from the brain and spliced them together he has just put the system back to OEM status leaving the alarm no way to engage the starter. I believe that may be where the problem lies but if not then I would say check your immobilizer bypass module the repair man mave have diconected that.

Thank you,
Luis

Posted on Dec 04, 2008

Ad
doin12volt
  • 233 Answers

SOURCE: Lights don't blink for remote start

If you look at the unit (probably installed under the dashboard, on the drivers side) You can see the wires going into the unit... Follow the wires back and you will find that 2 of them have in-line blade style fuses, it sounds like the fuse in the parking light output wire has blown. if you find the fuse is blown, replace it and the parking lights should be on again when you remote start it.

Posted on Jan 03, 2009

reynosaelect
  • 165 Answers

SOURCE: how do i program the remote start function on prestige 997

email me i cant help you,i need to know the model of the alarm and what kind of vehicle is installed here is my email reynosaelectronics@live.com.mx

Posted on Mar 17, 2009

  • 55 Answers

SOURCE: Hi ... My hyundai sata fe has a Prestige Keyless

What you need to find is the valet button which i believe is the blue blinking LED that should be in the dash and it blinks when you arm the system. So try this.. disarm the system and get into the car like normal than put the key into the ignition turn the key to "run" and press and hold the blue LED button till it turns solid. You are now in Valet mode which means the alarm is OFF. Now try starting the car and see if it starts all the time. If it doesn't start and the little blue light is on solid than we have other problems. Because with the alarm in Valet mode the starter disable feature is turned off. However if it does start all the time and gives no problem you might have a loose ground that has to be tightened up or other wiring issues. Now for the alarm going off at random times, you have whats called a "shock sensor" that is adjustable. What this boxs job in life is is to wait for any "impact" like a breaking window or something hitting the car. Notice i didn't say motion. The shock sensor is adjustable and this could be the random going off problem. The shock sensor would be a little box zip tied to a wire loom under the steering column. let me know... mark

Posted on Aug 16, 2009

MECP Guy
  • 344 Answers

SOURCE: prestige starter not working in 1996 toyota corolla

sounds like your unit is in valet mode

Posted on Feb 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote start on my 2000 Toyota Sienna van starts fine but after a couple of minutes shuts off and repeatedly restarts and shuts off. I have prestige remotes. Otherwise i don't know the model.


Prestige is a line of vehicle security and remote starts made by audiovox. Sounds like either a bad connection or a defective brain. Any car audio shop should be able to diagnose....however i would try to find a prestige dealer. While labor will not be under warranty the unit itself may be.

Aug 16, 2016 | Toyota Cars & Trucks

1 Answer

Car shuts off...


After starting the car with the remote, when you get inside the car. Make sure you are putting the key to the on position BEFORE pressing the brake pedal. If this doesn't help please let us know the type of car you have.

Nov 04, 2013 | Audiovox APS901 Car Prestige Remote Start

1 Answer

Remote start starts car and dies off after few seconds


try having the cpu reset using a code reader as you may have two systems operating in conflict that is causing the problem.

Jul 29, 2013 | Audiovox Prestige APS997C Alarm/Remote...

3 Answers

I have a new prestige car remote installed recently and i have a problem how to shut off the alarm coz the installer did not or forgot to give me the manual. When i start the car remotely i press the...


You did not mention the year/make/model of your vehicle but, the issue appears to be the factory alarm. The installer failed to make the connection. If you intend to make the connection yourself I would need information pertaining to the vehicle. The (-) pulse before start wire for Prestige remote starters is black with a blue stripe. It is in a 4 pin connector at the module. This wire can be used to disarm the factory alarm before the remote start sequence.

Jan 23, 2011 | Prestige Remote Start

1 Answer

Car starts and runs for 10 seconds then shuts off


Is the remote start programmed for voltage sense?. If this does not work a tack wire should be used.
  • Check shutdown diagnostics
  • Hood pin switch
  • Doors close
  • Trunk
  • Dome light
  • Brake pedal

Jan 08, 2010 | APS787 Prestige Remote Start and Security...

1 Answer

Prestige 2 way remote 5bcr07


That little "S" is the power save feature. Press the "F" and the lock buttons together to toggle the feature on and off. With the S on the battery in the transmitter will go into a power down mode when alarm is in disarmed state to save battery life.

Aug 02, 2009 | Gmc Dodge Ford Reverse Back-up Sensor...

Not finding what you are looking for?
Prestige Remote Start Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audiovox Vehicle Parts & Accessories Experts

xxxxxx xxx

Level 3 Expert

4861 Answers

The Knight
The Knight

Level 3 Expert

74243 Answers

Glen Weitzdoerfer

Level 2 Expert

101 Answers

Are you an Audiovox Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...