Question about Televison & Video

1 Answer

Step by step to program universal remote - Televison & Video

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,383 Answers

About which universal remote you're discussing about? Brand name? Model?
A general setup proceedings for universal remote controls are given below. If you want more details, check this.
Direct Code Entry

  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Posted on Jan 04, 2013

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
denz75_cudal
  • 55 Answers

SOURCE: STEPS TO PROGRAM T.V CODE IN UNIVERSAL REMOTE

Hi,

For brands that require programming, there are two ways to program: Using Code Lists or Code Search. Use Code Search if the code lists are not available or if the codes from the lists do not operate a device.

Programming a Device using Code Search:

  1. Manually turn ON your device (TV, VCR, Cable Box)
  2. Press and "HOLD" CODE SEARCH
  3. Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
  4. Release CODE SEARCH.
  5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
  6. Once the device turns off, press and release ENTER.
  7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

Programming a device using the Code Lists:

  1. Find codes for each device and brand below.
  2. Press and "HOLD" CODE SEARCH.
  3. Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
  4. Enter the three digit code from the TV, VCR or Cable Box code lists.

  5. Release CODE SEARCH.
  6. With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code


  7. You can try using these codes: RCA Codes 000,005,007,008,028, 035,037,054,069

    Hope you find this helpful.

    Thanks ,

    Dennis

Posted on Nov 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you program it to a GE universal remote


these are the codes
LG: 004 005 009 012 050 057 080 156 227 338

  • How to Program a GE Universal Remote ' Techwalla https://techwalla.com/content/program-ge-universal-remote Lost your Remote? Need help programming your GE Universal Remote? Most TV's, VCR's, DVD Player's, Cable and Satellite Boxes will work with a GE universal...
  • How to Program GE Universal Remote: Quick Steps www.brighthub.com > Electronics > Home Theater > Home Media 2011-04-18 · How to Program GE Universal Remote Using the Code Search Function. If you've tried the codes listed for your device brand and are unable to get your ...
  • GE Universal Remote Codes and Instructions ' direcTutor www.directutor.com/content/ge-universal-remote-instructions Goto GE remote Codes. Direct Code Entry for GE remotes with 4 digit codes. 1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to program.
  • How to Program a GE TV Remote ' Techwalla https://techwalla.com/content/program-ge-tv-remote GE universal remote controls allow users to program multiple devices onto a single remote. The remote control uses codes to detect the device, and you can...
  • GE Universal Remote Quick Start Guide - YouTube Youtube
    • BY JASCOPRODUCTSCOMPANY
    • 3 MIN
    • 216K VIEWS
    2013-04-18 · Video embedded · http://www.jascoproducts.com Eliminate remote clutter with GE Universal Remotes
  • How to Program a GE Universal Remote Control ' eHow www.ehow.com > Tech > TVs > Remote Controls
    • BY EHOW ELECTRONICS EDITOR
    Programming a Jasco/GE Universal Remote Control takes about seven steps. As with programming other remotes, you need to know the code of the component you are ...

  • May 09, 2016 | LG "32"" inch New 2011 HD LCD TV With HD...

    1 Answer

    What are step by step instructions on programming a he universal remote for symphonic tv


    1. Turn on your Symphonic TV.
    2. Press and hold SETUP until indicator lights
    3. Enter 0053 (or 0189 or 0227 or 0456 or 0024)
    4. Press CHANNEL UP. If your TV responds, it is programmed. If some buttons don't work, try repeating by entering one of the other codes.

    Oct 28, 2014 | Universal Remote Control GE174Universal...

    1 Answer

    How do I program my tv remote


    HI,

    DIRECT CODE ENTRY

    Step 1:Press and hold the "CODE SEARCH" button ("CODE.SRCH" for RCU500).
    Step 2:Press and release the device (VCR, TV, Cable etc.) button. If programming for AUX, press and release AUX button first, then press the device type to be programmed.
    Step 3:Enter the 3 digit code number
    Step 4:Release the "CODE SEARCH" button.
    Step 5:With your device on, press another button like "PROGRAM UP/DOWN" OR "VOLUM UP/DOWN" to test.

    CODE SEARCH

    If you cannot locate the code for your device, try thecode searchmethod below:
    Step 1:Turn on the device.
    Step 2:Press and hold the "CODE SEARCH" button.
    Step 3:Press and release the VCR, TV, Cable or Audio button. If programming for AUX, press and release AUX button first, then press the device type to be programmed.
    Step 4:Release the "CODE SEARCH" button.
    Step 5:Press "ON/OFF" (or "POWER" for RCU500) repeatedly until the device turns off. Note that because there are so many codes, you may have to press the "ON/OFF" button up to a hundred times (at a rate of once per second) if your code is towards the end of the preprogrammed list.
    Step 6:When your device shuts off, press and release the "ENTER" button.
    Step 7:With your device on, press another button like "PROGRAM UP/DOWN" OR "VOLUM UP/DOWN" to test, and if it does not function correctly repeat steps 1 through 6.
    CHECK THE LINK FOR CODE

    Electronics Equipment Repair Center RCA UNIVERSAL REMOTE CONTROL 3 DIGIT...
    Electronics Equipment Repair Center RCA UNIVERSAL REMOTE 4 DIGIT CODE FOR...
    Electronics Equipment Repair Center 3 DIGIT RCA UNIVERSAL REMOTE CODE FOR...

    Sep 27, 2014 | RCA Televison & Video

    1 Answer

    Need remote code for symphonic tv. Have living solutions giant remote


      Programming a Living Solutions Universal Remote
    1. Step 1 Turn on the component you wish to sync to your universal remote--your television, DVD player, VCR or stereo.
    2. Step 2 Point the remote at the device you are programming and press the corresponding device button on the remote. These buttons are labeled "TV," "VCR", "DVD," etc. Hold the device button for three to five seconds.
    3. Step 3 Push the power button on the remote. This should turn on the device that you are syncing.
    4. Step 4 Push the "Channel Up" or "Channel Down" button on your remote gradually until the device that you are programming shuts off.
    5. Step 5 Press "OK" or "Enter" on the remote once the synced device turns off.
    6. Step 6 Press the device button for the component you just programmed, and hit the power button while pointing the remote at the component. If programmed correctly, the device should turn on, and you should be able to control it with your Living Solutions Universal Remote.


    Jun 30, 2010 | Symphonic ST420FF 20" TV

    2 Answers

    I can't find the code for our tv brand it is a


      Try This Out


      Programming a Living Solutions Universal Remote
    1. Step 1 Turn on the component you wish to sync to your universal remote--your television, DVD player2.gif, VCR or stereo.
    2. Step 2 Pointthe remote at the device you are programming and press thecorresponding device button on the remote. These buttons are labeled"TV," "VCR", "DVD," etc. Hold the device button for three to five seconds.
    3. Step 3 Push the power button on the remote. This should turn on the device that you are syncing.
    4. Step 4 Push the "Channel Up" or "Channel Down" button on your remote gradually until the device that you are programming shuts off.
    5. Step 5 Press "OK" or "Enter" on the remote once the synced device turns off.
    6. Step 6 Pressthe device button for the component you just programmed, and hit thepower button while pointing the remote at the component. If programmedcorrectly, the device should turn on, and you should be able to controlit with your Living Solutions Universal Remote.

    Sep 21, 2009 | Big Button TV Universal Remote

    2 Answers

    Programming a remote


      Programming a Living Solutions Universal Remote
    1. Step 1 Turn on the component you wish to sync to your universal remote--your television, DVD player, VCR or stereo.
    2. Step 2 Point the remote at the device you are programming and press the corresponding device button on the remote. These buttons are labeled "TV," "VCR", "DVD," etc. Hold the device button for three to five seconds.
    3. Step 3 Push the power button on the remote. This should turn on the device that you are syncing.
    4. Step 4 Push the "Channel Up" or "Channel Down" button on your remote gradually until the device that you are programming shuts off.
    5. Step 5 Press "OK" or "Enter" on the remote once the synced device turns off.
    6. Step 6 Press the device button for the component you just programmed, and hit the power button while pointing the remote at the component. If programmed correctly, the device should turn on, and you should be able to control it with your Living Solutions Universal Remote.

    Sep 01, 2009 | Televison & Video

    1 Answer

    Buttons to push on universal remote to program channels


    There are 4 methods to program your remote.

    CLICK HERE for the user manual


    Thanks for using FixYa - a FixYa rating is appreciated!!!

    Jan 31, 2009 | RCA Universal Remote Control

    1 Answer

    Programing philip universal remote to my tv


    You can find the instructions here. Just follow the step by step instructions to properly select model of your Phillips remote. http://www.urc.philips.com/

    Apr 07, 2008 | Philips Magnavox Learning Universal Remote

    1 Answer

    Universal remote


    Codes for Panasonic TV.....171,148,054,170,062,374,381,437,003,070. You can Goggle the programming info...Just ask...How do I program a GE Universal Remote... There are about 7 steps...easy if these codes work....good luck...I have a remote that none of the given codes are working........

    Nov 22, 2007 | GE JASRM24912 Remote Control

    Not finding what you are looking for?
    Televison & Video Logo

    Related Topics:

    21 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    74383 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Electro Med Services...
    Electro Med Services...

    Level 3 Expert

    6694 Answers

    Are you a Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...