Question about Pride Pursuit XL PMV

1 Answer

FAULT CODE SAYS BATTS ARE LOW AFTER CHARGING

Even after charging all night, there's still a fault code on the battery condition meter saying the batteries are low. Could that possibly mean the batteries are not completely broken in yet, and not up to full capacity? This is a new scooter.

Posted by on

  • Jonathan Rand Jan 04, 2013

    Problem solved. I was mistaken. There's no fault code. The light just comes on at first... then it displays a code if something is wrong.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pride Master
  • 1,263 Answers

Hi, lets work on the assumption that your scooter is correct in saying the batteries are low, why is that ? , well you need to look at the charger and if possible try another charger , the other thing that could have happened is the charger fuse has blown, this is located on the tiller stem


If you are convinced that the charger and fuse are okay , look at the batteries, just because it a new scooter does not mean it new batteries ., let me explain let say your scooter has been assembled a year ago, batteries fitted , now the batteries have not been touched during that period , that in itself can kill batteries or as soon as you start charging them they give up.
I have seen this happen on many occasions.
Please rate my assistance


Regards

Posted on Jan 04, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 118 Answers

SOURCE: Scooter has full charge but still won't go.

It probably means that the connections or wiring from your battery are loose or broken. When you add the extra current required to run the motors, the voltage is being lost. Monitor the battery voltage with a meter while trying to drive the scooter will prove this.

Posted on Nov 27, 2008

  • 118 Answers

SOURCE: New batteries, fully charged, still wont work

I have the book if you can figure a way to post you email without getting too much SPAM. Be sure the charger is un-plugged, and that the free wheel lever is engaged.

Posted on Nov 27, 2008

dromtonpa
  • 40 Answers

SOURCE: Pride "Celebrity XL Deluxe" 4-wheeled Mobiltiy Scooter

Sounds like your motor brake is out. Usually the discolor on the brake indicates it has overheated.

Posted on Apr 12, 2009

  • 175 Answers

SOURCE: I have a Rascal 600f scooter that seems 2 work

It is pretty common for the meters on the charger to either not work at all, or give an inaccurate reading. They get bounced and dropped, and they aren't that well built to begin with. Basically, just ignore the charger as long as you are getting a full charge out of it, and getting good distance with each charge.

Posted on Jul 11, 2009

  • 6 Answers

SOURCE: We purchased a Rascal 300 two months ago that

Also check the fuses.

Posted on Sep 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix code 13 engine speed sensor Above 1000 rpm


Clearing the codes is simple that is done by removing the fuse of the EFI from junction box 2 for 10 seconds. Make sure to remove the jumper wire and switch the key off before clearing the codes.

Here are some common Lexus vehicles 1990-1995 codes:

Code 12 and Code 13 Rpm signal circuit fault
Code 14 Igniter signal circuit fault
Code 16 ECT control signal fault
Code 21 and Code 28 Main oxygen sensor fault (for ES300; SC300 & GS300 models)
Code 22 Coolant temperature circuit fault
Code 24 Intake temperature sensor circuit fault
Code 25 and Code 26 Air fuel ratio fault (for ES300 & SC300 models)
Code 27 Sub-oxygen sensor circuit fault (for ES300 CA & GS300 models)
Code 31 Low airflow meter voltage (for ES300 and GS300 models)
Code 32 High airflow meter voltage (for ES300 model)
Code 35 Barometric pressure sensor circuit fault (for GS300 & SC300 models)
Code 41 and Code 47 Throttle position sensor circuit fault
Code 42 Vehicle speed sensor circuit fault
Code 43 Starter signal
Code 51 Switch condition signal fault (for ES300; GS300 & SC300 models)
Code 52 Code 52 and Code 55 Knock sensor circuit fault
Code 71 EGR system circuit fault (for ES300; GS300 & SC300 models)
Code 78 Fuel pump control circuit fault (for GS300 & SC300 models)

Nov 18, 2014 | 1990 Lexus LS 400

1 Answer

ABS light on


I'm assuming you mean DTC C0562
ABS Device Voltage Low (2008-2009 Models)
Let's start with the easy stuff.

Some conditions that are possible to cause this fault:

Charging system malfunction
Excessive battery draw, or extended idling in heavy traffic
Weak battery or undercharged
Fault ground in the system

Apr 08, 2013 | 2009 Harley Davidson FLHR Road King

1 Answer

What does codes 64 63 11 09 and 21 0n 2005 dodge stratus mean


CODE 11 No distributor referene signal detected during engine cranking....Check circuit between the distributer and the pcm.

CODE 12 Problem with battery connection.Direct battery input to pcm disconnected within the last 50 ignition key-on cycles.

CODE 13** Indicates a problem with map sensor vacuum system.

CODE 14** map sensor voltage to high or to low.

CODE 15** Problem with vehicle speed sensor signal.No vss signal detected during road load conditions.

CODE 17 Engine is cold to long.Engine coolant temp stays below normal operating temp(check thermostat).

CODE 21** Problem with oxygen sensor signal circuit.Sensor voltage to computer not fluctuating.

CODE 22** Coolant sensor voltage to high or to low.Test coolant temp sensor.

CODE 23** Indicates that the air temp sensor input is below the minimum acceptable voltage or sensor input is above the acceptable voltage.

CODE 24** Throttle position sensor voltage to high or low.Test the tps.

CODE 25** Idle air control (IAC) valve circuits.A shorted condition is detected in one or more of the IAC valve circuits.Or a vacuum leak has been detected.

CODE 27 One of the injector control circuit output drivers does not respond properly to the control signal.Check the circuits.

CODE 31** Problem with canister purge solenoid circuit.

CODE 32** An open or shorted condition detected in the EGR solenoid circuit.Possible air/fuel ratio imbalance not detected during diagnosis.

CODE 33 Air conditioning clutch relay circuit.An open or shorted condition in the compressor clutch relay circuit.

CODE 34 Open or shorted condition in the speed control vacuum or vent solenoid circuits.

CODE 35 Open or shorted condition detected in the radiator fan low speed relay circuit.

CODE 37** Open or shorted condition detected in the torque converter part throttle unlock solenoid control circuit.

CODE 41** Problem with charging system.An open or shorted condition detected in the generator Field control circuit.

CODE 42 Fuel pump relay or auto shutdown relay (ASD) control circuit indicates an open or shorted condition.

CODE 43** Multiple cylinder misfire detected.Peak primary circuit current not achieved with the maximum dwell time.

CODE 44 Battery temperature sensor volts malfunction.Problem with the battery temperature voltage circuit in the pcm.

CODE 46** Charging system volts to high>Computer indicates that the battery voltage is not properly regulated.

CODE 47** Charging system voltage to low.Battery voltage sense input below target charging voltage during engine operation and no significant change in voltage detected during active test or alternator output.

CODE 51** Oxygen sensor signal input indicates lean air/fuel ratio condition during operation.

CODE 52** Oxygen sensor signal input indicates rich air/fuel ratio during engine operation.

CODE 53** internal pcm failure detected.

CODE 54** No camshaft position sensor signal from distributer.Problem with the distributer synchronization circuit.

CODE 55 Completion of fault code display on check engine lamp.this is end of message code.

CODE 62 Unsuccessful attempt to update EMR mileage in the controller EEPROM.

CODE 63** Controller failure.EEPROM write denied.Check the PCM

Dec 12, 2012 | 1995 Dodge Stratus

1 Answer

I have a Yamaha Tach/Hour Meter 1/10. I cannot turn it off. Boat batteries are disconnected and I have disconnected the tach/hour meter. It keeps flashing


From what I have gathered on the internet, it doesn't turn off. When running it displays RPM, when engine off, displays run time. Estimate for the internal battery was 10 years, but I wouldn't bet on it. This is a sealed unit and priced low enough that after a few years it is a throw away. Liquid Crystal displays use very little power, micro micro amps, and it is possible that it is designed to charge itself when the engine is running off the pulses from the plug wire, micro amps at a time. All that said, I don't think you have a problem, just need to read the instructions and see if they say anything different, I couldn't find them online so hope you have them.

Sep 23, 2012 | Yamaha Delux Hour Meter & Tachometer

1 Answer

Fluctuating voltage meter


Alternator maybe charging , but not enough to keep the battery charged which is causing the battery to drop charge. Most likely it's the voltage regulator inside the alternator. but regardless the whole alternator will have to be replaced. This will eventually cause the new battery cells to go bad.

Jan 06, 2012 | 2006 GMC Envoy

1 Answer

I was driving down the hwy & it wouldn't let me accelerate anymore so I pulled over & shut off the car. well it wont start back up. it sounds like it's trying but wont


Hi Marie,
It is really hard to say without actually checking the car, but it sounds like you may be having charging system problems. Possibly a bad alternator, loose battery cable or the like. Low voltage at the Powertrain Control Module (PCM) will cause the PCM to go into "reduced power mode" - also known as "limp-in mode". This will limit your accelerator and shut off some of your electrical accessories while you are driving. If the battery voltage is low, this is what is keeping your car from re-starting. Engine overheating can also cause similar symptoms.
I guess the question is - did you have any warning lamps on when this happened? Was the "Check Engine" light on? Was the "battery" light coming on?

The best advise I can give you at this point is to get the car's computer network scanned for fault codes. Any fault codes stored will help to determine what is going on. The only other instruction I can give you is don't keep trying to start it. If the battery voltage is low, continuing to try starting it can cause the battery voltage to drop low enough to clear the memory in your PCM. This would not be good when it comes to trying to figure out wnat happened.

Oct 09, 2011 | 1997 Mazda Millenia

1 Answer

2009 sportster 1200 low. New battery has gone dead in 4 or 5 days. Replaced original battery a month ago. had some light corrosion on the fuse block at that time. cleaned that up as well as possible when...


Get your battery charged up to full charge and put it back in the bike but leave the negative battery cable loose. You'll need a digital volt ohm meter that will measure at least ten amps of current. Pull all the fuses out of the bike and leave the switch OFF. Set the meter's function selector switch to AMPS. Plug the meter leads into the meter with the red wire in the AMPS hole and the black lead into the COMMON hole. Connect one lead to each clip where a fuse goes in. This wires the meter in series with the circuit, replacing the fuse. Hold the negative battery cable onto the negative battery post. The meter will tell you how much current is flowing through the circuit. If the reading is a negative number, reverse the meter leads where you have them connected to the fuse holder. This will tell you which circuit has the current draw in it. From there, you'll have to refer to a wiring diagram to determine exactly what is on that circuit. The reason you leave the negative cable loose is if you short something, you can disconnect the battery quickly if you have to.

Good Luck
steve

Sep 18, 2011 | Harley Davidson XL 1200 C Sportster Custom...

1 Answer

My sumsung YPK-3 mp3 player does not charge. When I connect to the PC the usual charging screen comes up saying it is connected and is charging. Even after over 5 hours, it did not charge at all and when...


The battery is at fault. The charging circuit is fine as it says CHARGING. As the battery is at fault you may like to as Samsung to replace it if the device is still under warranty. Else replace the battery.

Jul 05, 2011 | Samsung YP-K3 MP3 Player

1 Answer

I have a1999 Honda VFR800FI motorcycle. If I fully charge the battery, I seem to be able to ride for about 1 hour or so. Could my generator be bad or something much worse? I'm only getting 12v to the...


G'day,
You say you are only getting 12v to the battery(& I presume you tested this with the engine running) then that is too low.
It needs to charge from about 13.5 to 14.2volts(DC).
Common causes of a low charge rate are,
Faulty voltage regulator.
Faulty alternator(stator usually).

You need to have these items tested to dertermine which is at fault.

Unless your experienced, faultfinding charging systems can be tricky & you need a couple of special tools too do it efficiently.

If your up for it- & have a multi meter,
You can start by disconnecting the wiring at the regulator.
Using the meter set to resistance-ohms times 1- check between the three yellow wires-yellow to one yellow then the other-see you get same readings & should be quite low(just a couple or few ohms)
Now set your resistance scale to max.
Probe between each yellow wire & earth.(don't let your fingers touch the probes-it will give a false reading)
There should be NO CONUNUITY- Any reading between the stator yellow wires & earth means a faulty stator.
As for the regulator- there all different so manufacturers specs are usuall needed.- as are test procedures.

Hope this has helped some what
regards Andrew Porrelli

May 12, 2011 | 1999 Honda VFR 800

1 Answer

Check engine code 55 jeep grand cherokee laredo v6 1997. transmission wont shift properly also pulling code 21 and i figured out that one is for the throtle position sensor


These are the fault codes for your Jeep below;

Jeep
11 IGN reference signal.
13 Fault in the map sensor pneumatic circuit.
14 Fault in the map sensor electrical circuit.
15 Fault in the vehicle speed sensor circuit.
17 Engine running too cool.
21 Problem in the oxygen feedback circuit.
22 Fault in the coolant temperature sensor circuit.
23 Air temperature sensor.
24 Fault in the throttle position sensor circuit.
25 Fault in the IAC motor drive circuit.
27 Fault in injector driver interface circuit.
31 Purge solenoid circuit.
33 Fault in air conditioning cutout relay circuit.
34 S/C solenoid circuits.
35 Fault in fan relay circuit.
41 Fault in the charging system or no field current.
42 Fault in the ASD relay driver circuit.
43 Fault in ignition coil control circuit.
44 Battery Temp Voltage.
46 Battery voltage is too high.
47 Battery voltage is too low.
51 Lean condition is indicated.
52 Rich condition is indicated.
53 Internal problem in module.
54 Fault in the distributor high data rate pickup circuit.
55 Completion of fault code display.
62 Unsuccessful attempt to update EMR mileage.
63 Unsuccessful attempt to write to an EEPROM location by the controller.
76 Fuel pump resistor by-pass relay circuit

Mar 08, 2011 | 1997 Jeep Grand Cherokee

Not finding what you are looking for?
Pride Pursuit XL PMV Logo

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

278 Answers

Colin Taylor

Level 2 Expert

346 Answers

Are you a Pride Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...