Question about Mitsubishi WD-52525 52" Rear Projection HDTV

2 Answers

Mitsubishi diamond series tv

WE TURNED OUR TV OFF LAST NIGHT AND IN THE MORNING WHEN WE TRIED TO TURN IT ON THE TIMER LED LIGHT ON THE FRONT STARTED BLINKING AND WE WERE NOT ABLE TO TURN THE TV ON .We don't know if the tv is on or off right now bcause of the blinking light.We unplugged the tv two to three times for more than 15 minutes each and we even pressed the system reset button and a/v reset button but as soon as we plug the tv back in or let go of the system reset button it starts blinking again .it's been blinking now for more than 24 hours (we all ready called mitsubishi service center it was'nt much help.what should i do

Posted by on

  • 4 more comments 
  • Anonymous Nov 09, 2007

    I have the same problem..can u please help. need to find out how to replace the capacitors. and to solder them.please help . julie

    nigma_fe_elsama@yahoo.com

  • ryancurrin Feb 21, 2009

    I have the same problem. It is cause by a power surge/outage. I have no solution and it sucks that the manufacturer is not more helpful!!!!!

  • kmhawkins25 Mar 09, 2009

    I have a Mitsubishi WD-52327 and tonight the picture just went away and the red status light came on and then started flashing.

  • bikinibot685 Apr 26, 2009

    we have the same problem and tok it to a tv repair who told us it was a main computer board which would cost aproximately $600 but was not sure that this was the problem. they had the tv for over a month with no repairs. My tv is a 65 inch flat lcd mitsubishi. look online and take it to a reputable mitsubishi certified repair company. This may not be our problem and according to certifiable repair company it may not be worth fixing! The tv is only 1 1/2 years old which is sickening that it did not last longer. We had purchased it from circuit city, whom are now out of business and warranty is invalid! We were not happy with this news!

  • scott Dec 23, 2012

    Same problem. Send me the fix? naz@dslextreme.com

  • honny1488
    honny1488 Feb 23, 2013

    i have a problem. we turned off tv last night and trying to turn tv on this morning and it won't turn on. black screen the timer light comes on and turned off the tv. what do i do....bubblezoc@aol.com. thanks

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a 2003 mitsubishi WS-55711. While watching TV the other day it just shut off. When I pressed the power button, the green light turned on for approximately 3 secs, then shuts off. I've attempted to simply unplug it for a period of time in hopes that it would possibly reset. However, the same thing happens. Is this a problem I can fix on my own or does a professional need to fix it? If I do have a pro fix it, what is the likelyhood that it will happen again? Should I just invest in a new TV? Thanks

Posted on Oct 05, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

It sounds like you have the blinking light of death! This is a common problem with these Mitsubishi TV sets. The DM board has a fault inside of it. The DM board is the digital control board. The DM board will cost over 700 bucks and the labor will be another 2 or 300 bucks. There is however, a fix I have posted here to assist those who are handy with things like this. You can see this how-to Here:http://www.fixya.com/howto/h154057-mitsubishi_dm_board_repair. Now this is not the exact set you have but the repair procedture should be the same. there is even a link where to get the right parts from. If your set does not look like the one I used in the instructionms. I do have an update for sets with a light engine inthem to help locate the DM board and to take it out . Then simply follow the rest of the instructions as I saids before. If you want the update, leave an e-mail address and I will forward it too you. If you can do this repair, and a lot of peeps have with no problem,save at least 800 to 1000 bucks! Good Luck

Posted on Jun 29, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MITSUBISHI WS55907 Diamond 1080 TV bought in 2000 was powered off, unplugged, for a year. Turned the set on with remote last night and worked fine, had very crisp picture.


Your TV was waiting between 2000 and now to suffer power supply failure. It is very frustrating to go from everything working perfectly to nothing.

Oct 31, 2016 | Mitsubishi WS-55907 55" Rear Projection...

1 Answer

Will not turn on


Probably a spontaneous power supply failure.

Jan 07, 2014 | LG 42" 5400 Series LED HDTV - 42LN5400

1 Answer

WD57732 purchased 12/06 and has worked fine. Turned off at 11 pm last night. No indication of trouble. Tried to turn on this morning and nothing. Did TV Reset, green light flashed for a minute like it...


Now,tv on?.Tv "LAMP" LED light indication flashes or stay on?How long the Lamp been inside this tv,been inside like 1 1/2 or 2 years and tv been on each day like 4 or 5 hours a day in used.The lamp life are over.Should replace another lamp.

Dec 10, 2010 | Mitsubishi WD-57732 Projection Television

1 Answer

Mitsubishi vs-50609 green timer light comes on no


Unplug the tv and leave it unplugged for a couple hours. Plug tv back in press reset button. TV led may flash for a day but should come on. I did this last night to mine and it came on at 11am today.

Mar 29, 2010 | Mitsubishi VS-50609 50" Rear Projection...

1 Answer

Power Loss


You will find 4 swollen capacitors in the DM module of value 1000uF 16volt. Replace them.

Aug 31, 2009 | Mitsubishi WS-55711 55" Rear Projection...

2 Answers

Sony Trinitron won't turn on, Standby/Timer light now blinks 2x


your power unit maybe going bad

If you need further help, reach me via phone at https://www.6ya.com/expert/david_eb7ea98642566cc6

Jul 21, 2009 | Televison & Video

1 Answer

I HAVE A MITSUBISHI DIAMOND SERIES TV. I REPLACED


Sounds like your TV is overheating. How dirty is the filter on the side? Is the fan on the back turning ok:? Does it look real dirty? Is so, a good cleaning is in order. Also, there is a fan under the lamp. Can you determine if it is working...the air flow may be obstructed (from the clogged filter) and it takes some additional time to cool.

Jun 21, 2009 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

2,489 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1230 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...