Question about Marantz SR-5400 Receiver

Open Question

Marantz SR5400 - Check POW5

When I switch on my Marantz SR5400 AV receiver, I get a contstant tick sound. The display is blank and there is no other sound. When I switch it off, the display shows the following message - CHECK POW5.

Posted by on

4 Suggested Answers

  • 1 Answer

SOURCE: When I turn on the receiver it displays check

I have the problem of check POW5 too and have the similar procedure taken several times but it doesn't help. What actually problem I have encountered? Or the quality of this brand is not reliable? Does any body help?

Posted on Apr 28, 2011

  • 1894 Answers

SOURCE: Marantz SR7400 AV Surround Receiver

try a hard reset

leave the unit unplugged for one night and then switch it ON

Posted on Oct 07, 2008

  • 405 Answers

SOURCE: error code 'CHECK E2P IF'

Water damage is the worst. It could damage the boards beyond repairability. It will take a professional to determined, if your unit can be saved

Posted on Nov 28, 2009

  • 1 Answer

SOURCE: what is the error POW 5 on a marantz sr 7500

I have a POW 5 failure on a marantz sr 7500. Anybody know how to fix?

Posted on Aug 01, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What can i do to stop the red light blinking for marantz sr5007?

Turn off the power using X.
2 Press X ON/STANDBY while simultaneously pressing PRESET CH + and PRESET
CH -.
3 Once the display starts flashing at intervals of about 1 second, release the two

Aug 09, 2014 | Marantz SR5007 Home Theater AV Receiver

1 Answer

Hi. I just bought a new Onkyo TX-SR313 AV Receiver. When I power on. it gave tick tick tick sound continuously every 3sec. No display at all. Had try to contact dealer but in vain. Thanks

Sounds like the output transistors are shorted. The relays are being tripped (tick tick sound) due to a major short. Need to get it to a technician familiar with receivers.

Apr 21, 2014 | Audio Players & Recorders

1 Answer

Marantz sr5400 static

static is interference from other devices being too close to each other.
try moving or turning off devices that aren't being used. try not to stack all of your stuff on top of each other. i hope this helps

Apr 09, 2014 | Marantz Audio Players & Recorders

1 Answer

Marantz NR1402 AV receiver Going to standby Mode

There could be a short in one (or more) of the speaker connections. Try disconnecting all speakers and turning on the receiver. If it still switches to standby, there may be an internal problem.

Mar 03, 2014 | Marantz Nr1402 Av Receiver

1 Answer

Marantz NR1403 standby mode only

Connect all speakers . Does it start?
If not , you have at least one audio output amplifier failure.
Seek out a Marantz dealer to help you get a tech

Jan 31, 2014 | Marantz NR1403 Slim-Line Dolby TrueHD AV...

1 Answer

Fix lcd cd player

Marantz US

Contact them and ask if the display uses small bulbs to backlight the display

Dec 06, 2013 | Marantz Audio Players & Recorders

1 Answer

Error code 'CHECK E2P IF'

Water damage is the worst. It could damage the boards beyond repairability. It will take a professional to determined, if your unit can be saved

Nov 28, 2009 | Marantz Audio Players & Recorders

Not finding what you are looking for?
Marantz SR-5400 Receiver Logo

Related Topics:

638 people viewed this question

Ask a Question

Usually answered in minutes!

Top Marantz Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

69955 Answers


Level 3 Expert

4678 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6467 Answers

Are you a Marantz Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides