Question about Mitel Superset 4150 Phone

1 Answer

Massage on display "sync"

I have a problem in my telephone set that is on the display sync massage displayed and set is not working.my set module is superset 4150
please tell me the way to use the set....

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 95 Answers

This phone is a digital phone and requires connection to a digitalsystem commonly called a "key system". If you have removed it fromwhere it was connected and tried to use it at home or somewhere else itwill not work. Most home or normal phone jacks are connected to yourlocal provider directly and is what is called an analog system. The 2are NOT compatable without an interface device. If it is connected to akey system then thier is a problem with the port on the Mitel keysystemthat goes to the jack you are plugging the phone into and you will needa technician to fix/rewire this onsite. Hope this helps you. A manualfor your phone can be gotton here:http://www.octelephone.com/4150user.pdf

Posted on Mar 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change the display name?


Administering a 1400 Series Digital Deskphone
Perform the following steps for each 1400 Series Digital Deskphone:
1. Log into the Avaya Aura Communication Manager administration interface.
2. Perform one of the following steps:
? If you are adding a new extension and want to assign a specific extension number, use
the add station nnnn command, where nnnn is the new extension you want to assign.
? If you are adding a new extension and want to assign the next available extension
number, use the add station next command.
? If you are installing the 1400 Series Digital Deskphone at an existing extension, use the
change station nnnn command, where nnnn is the existing extension you want to
modify.
The Station screen appears.
3. Perform one of the following steps:
? If you are administering a 1408 telephone, type 2410 in the Type field.
? If you are administering a 1416 telephone, type 2420 in the Type field.
4. In the Port field, type the port address.
5. In the Name field, type the name to associate with this telephone. Administering 1400 Series Digital Deskphones
20 Avaya 1400 Series Digital Deskphones Installation and Maintenance Guide
6. Configure the remaining fields on the Station screen pages. Keep in mind the following
information:
? If you are administering a 1408 telephone, the first eight call appearance/feature buttons
displayed on the Station screen are administered on the 1408 telephone. (Since the 1408
telephone is aliased as a 2410 telephone, the Station screen displays 10 call
appearance/feature buttons.) The remaining buttons displayed on the Station screen are
not administered.
? If you are administering a 1416 telephone, the first 16 call appearance/feature buttons
displayed on the Station screen are administered on the 1416 telephone. (Since the 1416
telephone is aliased as a 2420 telephone, the Station screen displays 20 call
appearance/feature buttons.) The remaining buttons displayed on the Station screen are
not administered.
? If you are administering a 1416 telephone with a DBM32 Button module, the first 16 call
appearance/feature buttons displayed on the Station screen are administered on the
1416 telephone. The remaining eight call appearance/feature buttons displayed on the
Station screen are administered on the first eight buttons of the DBM32 Button module.
The 24 buttons of the EU24 expansion module displayed on the Station screen are
administered for the remaining 24 buttons of the DBM32 Button module.
For more information about administration and features, see:
- Administering Avaya Aura™ Communication Manager, Document Number 03-300509
- Avaya Aura™ Communication Manager Feature Description and Implementation,
Document Number 555-245-205
- Avaya Aura™ Communication Manager Screen Reference, Document Number
03-602878
7. When finished administering this extension, save your changes.

Online Virus Removal 39 99 Online Virus Removal and Online PC Help

Dec 19, 2014 | Avaya Ip Office 1416 Digital Deskphone -...

1 Answer

Can we have caller ID on the 3158-05


The Avaya 3158-05 does not have a display. It can't show the Caller ID information from the telephone provider. The Avaya 3158-07 PARTNER 18D or the 34D will display Caller ID information if your system is connected to a telephone line. (One of these modules: 206EC, 308EC, or 400EC, is required. If you have a T1 line, you can't get Caller ID.)

I hope this helps.

Cindy Wells

Sep 17, 2013 | Avaya Partner 18 Telephone 3158-05

1 Answer

My radio stopped working and just says PHONE with the phone icon on Display. 2006 mountaineer.


Try pressing the phone key on the display. It sounds like you have hit a mute setting for taking or making telephone calls. It is possible that the Sync system is waiting for you to enter a phone number and has killed the radio for the call.

May 08, 2012 | 2006 Mercury Mountaineer

1 Answer

HP LaserJet 3055 .fax not working


Direct Line:
1.Check telephone line.2.Make sure telephone line is connected in line in port not in extension.3.connect extension telephone phone to the device & check for the dial tone.
Dial the number and observe weather extension phone is ringing?
A. *If extension phone is ringing check display is there any message like "ringing".. wait till fax tone comes,if not check "basic fax settings"... if setting are OK .. Replace formatter
B. *Extension phone is ringing no message displayed on device replace "LIU" card..
If extension telephone is not ringing check telephone line..
No out going faxess:
*Check line is connected though EPABX , if connected Check..prefix setting..
*Check out going..
Best of luck...

Sep 06, 2011 | HP LaserJet 3055 All-In-One Printer

1 Answer

What do I need to connect my laptop/wii/dvd player to my Sharp Quattron Aquos Led TV? Please need an urgent answer please?


Hello

1 Press MENU to display the MENU screen, and then

press [=> or <=] to select "System Options".

2 Press [Up or Down] to select "Input Terminal Setting", and

then press ENTER.

3 Press [Up or Down] to select "PC input", and then press

ENTER.

4 Press [Up or Down] to select a specifi c adjustment item,

and then press ENTER to set each item.

5 Press [Up or Down] or [=> or <=] to select or adjust the desired
setting, and then press ENTER.

Adjusting the PC Image

Auto Sync. (for Analog PC Input Mode Only)

For automatically adjusting the PC image.

Yes: Auto Sync. starts and "Now adjusting the image."

displays.

No: This function does not work.

When "Auto Sync." is successful, "Completed" displays. If

not, "Auto Sync." failed.

"Auto Sync." may fail even if "Completed" displays.

"Auto Sync." may fail if the computer image has low

resolution, has unclear (black) edges, or is moved while

executing "Auto Sync.".

Be sure to connect the PC to the TV and switch it on before
starting "Auto Sync.".
OK.

Mar 14, 2011 | Sharp Televison & Video

1 Answer

The phone says no phone line, and i dont have a dial tone. cant call out and cant get calls coming in


Model LS6305: How to register a handset:
  1. Place the non-registered handset in the telephone base or charger. If 1.Press FIND HS on base 4sec and 2.Then press # on handset do not appear alternately on the handset screen after a few seconds, remove the handset and place it in the telephone base or charger again.
  2. On the telephone base, press and hold FIND HANDSET for about four seconds until the red IN USE light on the telephone base turns on.
  3. Remove the handset from the telephone base or charger and then press # (pound key). It displays Registering...Please wait. It takes about 60 seconds to complete the registration. The handset displays Handset X Registered and you hear a beep when the registration process completes.
  • If the registration fails, the handset displays Registration failed for a few seconds, then 1.Press FIND HS on base 4sec and 2.Then press # on handset alternately. To reset the handset, remove it from the telephone base or charger and place it back in. Try the registration process again.
Model ip8300: How to register a handset:
  1. Press and hold FIND HANDSET for at least 10 seconds on the telephone base. The VMWI and LINE IN USE lights will blink alternately indicating that the telephone base is in registration mode.
  2. To display the telephone feature menu, press the Menu softkey from the main idle screen.
  3. Press the up, down, left and/or right NavKeys to choose Registration Settings then press the Select softkey or center NavKey/SEL.
  4. Press the up or down NavKey to choose Handset Settings then press the Select softkey or center NavKey/SEL.
  5. Press the up or down NavKey to choose Register to Base then press the Select softkey or center NavKey/SEL. A list of locations for assigning telephone bases will be displayed.
  6. Press the up or down NavKey to choose an empty location and press the Register softkey or center NavKey/SEL.
  7. The handset will display Searching while it searches for the telephone base. If the search is successful, a code from the telephone base will be displayed. To register the handset to the telephone base, press the Register softkey.
  8. In the Enter PIN box, enter the system PIN. The default PIN is 0000. Press the Apply softkey.
  9. Handset registered will be displayed when the registration process is complete. The screen will return to the registration settings menu. Press OFF to return to the idle screen.
Model ip8301: How to register a handset:
  • Before registering the handset with the base station, press the FIND HANDSET button in the base till the VMWI and LINE IN USE lights blink alternatively. When the lights start blinking, register the handset. The default PIN for registering the handset with the base station is 0000.
  1. Press Softkey Menu from Home screen
  2. Choose the Settings icon from Menu screen and press center Navigation key/SEL to display the settings menu options.
  3. Press the up or down Navigation Key to choose the Registration Settings menu option and press the center Navigation key/SEL to select.
  4. Press the up or down Navigation Key to choose the Handset Settings and press the softkey Select to select.
  5. Press the up or down Navigation Key to choose the Register to Base and press the softkey Select to display a list of available base stations. Choose a base station from the list and press the softkey Select to select.
  6. The handset will search for the Base within its range. During this time, the searching screen will be displayed.
  7. If the search is successful, the Base station number of the base will be displayed.
  8. Press softkey Register. Enter the PIN and press softkey Apply to save and subscribe to the base station.
  9. To cancel the entire operation, press OFF key anytime.

Mar 07, 2011 | Vtech DECT 6.0 Cordless Phone with Digital...

1 Answer

How do i get to system programming on my norstar m7310 to get to auto relocate


Enter Administration Mode
  • Using you telephone set push feature * * 266344
  • Display will read Password
  • Using you telephone set enter password: 2 6 6 3 4 4

  • Display will read Configuration
  • Press Show
  • Display will read Trk/Line Data
  • Press Show
  • Display will read Sys speed dial
  • Press Next several times until the display reads Set relocation: Y or N
  • Press Change until the phone displays Y for ON or N for OFF

Jul 02, 2009 | NorStar M7310 Corded Phone

1 Answer

Waiting for sync


This phone is a digital phone and requires connection to a digital system commonly called a "key system". If you have removed it from where it was connected and tried to use it at home or somewhere else it will not work. Most home or normal phone jacks are connected to your local provider directly and is what is called an analog system. The 2 are NOT compatable without an interface device. If it is connected to a key system then thier is a problem with the port on the Mitel keysystem that goes to the jack you are plugging the phone into and you will need a technician to fix/rewire this onsite. Hope this helps you. A manual for your phone can be gotton here: http://www.octelephone.com/4150user.pdf

Jan 19, 2009 | Mitel Superset 4150 Phone

1 Answer

Sync massage displayed on the display and set is not working.


This phone is a digital phone and requires connection to a digital system commonly called a "key system". If you have removed it from where it was connected and tried to use it at home or somewhere else it will not work. Most home or normal phone jacks are connected to your local provider directly and is what is called an analog system. The 2 are NOT compatable without an interface device. If it is connected to a key system then thier is a problem with the port on the Mitel keysystem that goes to the jack you are plugging the phone into and you will need a technician to fix/rewire this onsite. Hope this helps you. A manual for your phone can be gotton here: http://www.octelephone.com/4150user.pdf

Jan 19, 2009 | Mitel Superset 4150 Phone

Not finding what you are looking for?
Mitel Superset 4150 Phone Logo

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitel Lands Phones Experts

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

kakima

Level 3 Expert

102366 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

13773 Answers

Are you a Mitel Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...