Need info on capacitor for toyang wet saw

REPOST with more info, hand saws do not have capacitors.

I am not familiar with this band saw. Do you know the size of this band saw? Is it 14" ? You can actually just use ( cross reference) another manual ,

Blade should be secured to motor. Make sure bolt is tightened while holding blade with a pair of channel lock.

Hi, you can purchase push buttons on amazon, click here and take a look: Amazon com Tile Saw switc. I hope this was helpful. Cheers

Go to radio shack explain to clerk what you need ,they should stock the 240v, 60 hz capacitor once obtaine you must solder the cap in good luck

Even though their site has a listing for this tool it won't acknowledge it exists. I suggest calling them at 1-800-211-7262. I found a listing for an EY3530 metal saw that is also a 15.6 but when I tried to find the explosion there was a problem with the site. Let me know if I can try and help more.

If you take it to a electric motor repair shop, they will probably have one in stock.

SOUNDS LIKE THE CENTRIFUGAL SWITCH IS NOT WORKING.
THE MOTOR IS STARTING ON THE START WINDING AND NOT SWITCHING TO THE RUN WINDING. THAT IS THE REASON IT IS RUNNING SLOW.

We are currently experiencing a problem with the target TA10100 wet saw. It will start up and immediately shutdown. The local authorized tool repair said that the part encased on the top of the Baldor motor is called a capacitor. we have yet to find out if this is the cause of the problem. Hope the information helps you because so far it hasn't helped us.