Question about Tissot T-Touch T33159851 Wrist Watch

2 Answers

Digital and analog display show different time

How to sinchronize them

Posted by on

  • Anonymous Feb 06, 2009

    the analog and digital time is not sinchronized

  • Guy Emerson Mar 23, 2009

    It was useful to find the synchro facility but unfortunately for me it does not synch up the hands with the digital time. Are there other ways or resolutions?

    My hands no longer sycnh with the time and I cannot use the compass and meteo functions as the hands do not operate correctly.

    guy.emerson@oracle.com

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,334 Answers

Paste this link into your browser:

http://www.t-touch.com/flash.html

1)Close available countries window,
2)Click on T-Touch, then choose Stainless Steel,
3)On the right side of the window click on film tab,
4)In the left box in the window find SYNCRO and click on it,
5)Watch and listen to instructions
6)Smile

Do not forget to rate, please.

Posted on Jan 19, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

This is an expected periodic adjustment. The solution is addressed in the Tissot Touch manual (came with your watch and available free online at the Tissot website. Look for the section titles "Synchronization".

Posted on Jun 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a disallignement of 10 minutes between the digital and the analogical time. The digital time is perfect how can I allign the analogical one?


You have to know that analog time "follows" digital time.Any hour/minutes correction on the display has direct effect on time/minutes hands.Some times, mostly after battery replacement,hands might have declination.That is why there is a function so called "Hands home position adjustment".Using this function you can align both hands to 12/00 position.If there is any declination (I think is your case) you can correct.Try to enable this function by pressing for 4-5 sec the upper left button(A) until "HAND SET" appears.If hands are not aligned exactly to 12/00 position, you must correct by pressing the lower right button (D) for forward movement or the upper right button (B) for backward movement.In fact, minutes hand is aligned,hour hand follows.When both hands are set to 12/00 (home position) press button A again.Time Mode returns to the display.Normally hands will now show exactly according to digital (display) time.I hope this will help.

May 23, 2015 | Casio WVA105HDA Wave Ceptor watch

1 Answer

Waveceptor 3310 Frozen "H-S ET"


You must set the digital time as well.Analog time (hands) follows digital time.At first press button A.If digital time is according to analog time ok.If not you have to follow "H SET" (hour setting) procedure.

May 01, 2014 | Casio Watches

1 Answer

Half hour lag


Some watches can display dual times (two values) usually off by an integer number of hours + 30 minutes, Read the manual to set the digital display time then correct the analog display. Or just use one of the two.

Oct 15, 2013 | Casio Edifice Watches

1 Answer

How do i match the digi time with the hand time?


Some Renato anidigis are world timers tracking second times and time zones. On my Vulcan World timer for example, pressing the crown allows you to select and set a second city and time zone for the digital display while the analog dial continues to show the primary local time you entered when you did the initial setup. If you want both displays to show the same time, simply set the same city for both displays. To set the secondary digital display on mine, after pressing the crown, CITY would blink, and I would choose the same city and time zone again rather than let the indicator rest on a different one at random.

Mar 20, 2011 | Renato T-Rex Ana-Digi Watch for Men

1 Answer

How to set the hands to match the correct digital display on my Casio wave ceptor 2734 wva-104h watch



Setting Digital Time
  1. The digital timepiece on a watch is set using the function buttons on the outer part of the watch face. To set the digital time, press and hold the upper left button until the seconds starts blinking. Press the lower right button to reset the seconds to "00."

    Push the lower left button to move to the Daylight Savings Time portion of the watch. Use the lower right button to toggle between "On" and "OFF."

    Press the lower left button twice. The hours unit will start blinking. To advance the hour, press the lower right button repeatedly until the correct hour is displayed. If you need to move the hours unit backwards, press the middle right button until the correct hour is displayed. When the hour is set, press the lower left button to switch to minutes, and use the same commands to change the minutes unit.

    After the time is set, press the upper left button to exit the digital time setting function.
  2. Setting Analog Time
  3. You may find after setting the digital timepiece that the analog display does not match. When this occurs, you need to set the analog time. To set the analog time, press the lower left button 6 times. Next, press and hold the upper left button until the digital time starts to blink. This indicates that you are in analog time setting mode.

    Analog time adjustment is completed using the lower right button. Every time you press the button, the analog time will advance 20 seconds. If you need to make a big change to the analog time, press and hold the lower right button to make the hands move faster. Once the analog time is set, press the upper left button to exit the analog time setting mode.

Aug 21, 2010 | Casio Watches

1 Answer

I do not have the owners manual. How do I adjust the analog hands on the watch to correspond with the digital time displayed? Currently the the digital time and analog time are about 13 minutes...


You can get instructions from the Casio web site.

Go to the casio web site "casio.com".

Select "support" and the "manuals",
watches;

Accept terms

Select "watch manual archive"

Read the number of the back of your watch and enter it into the search box

Aug 05, 2010 | Casio Watches

1 Answer

Analog hands show 2hour 15minute ahead of the digital time. Can swap time zones fine, but the time difference remains. Cannot synchronize as per manual because cannot get eco-bat -1 set point. How to...


I have read the instructions and theyare as clear as mud!

If you haven't already tried it, try foll0wing the "local time" setting instructions, with reference to the s#last section "If necessary perform setting..............." This should either alter the hands or the digital display, so that you can get them to agree.

If you still cannot set your watch, then you might find it useful to go to Tissot.com and click on "contact us" and send them an email explaining your problem.

Mar 14, 2010 | Tissot T Touch Navigator 3000 T96.1.488.42...

1 Answer

Can't adjust the date on a digital watch


These are the instructions for the AD0721. They might apply to your model, too. I hope this helps:

http://img261.imageshack.us/img261/6784/manualr.jpg

The analog setting of the watch takes place by pulling out the knob (kind of tough) and adjusting, like a regular analog watch. The analog and digital displays are will NOT stay in sync, unfortunately.

Good luck.

PC

May 26, 2009 | Watches

2 Answers

Cant se time Citizen 8988-q02047 HSB wristwatch


In the time mode, press the upper right button for 2 seconds and the time display will flash. Then press the same button untill the entire time will flash, or both hour and minutes flash at same time. When the hour and minutes flash at same time, this adjust mode is the adjusting of the analog left display (A1). Now, press the lower button for adjusting de hour shown at the digital display that shows the same hour at analog display. This method is to adjusting the 8982 that is the "father" of 8988. Like a Citizen collector, and don´t know any website that you can view the setting instruction of 8988, only the 8982 is disposable here: http://www.citizenwatch.com/downloads/techguides/8982.pdf

Nov 20, 2008 | Citizen Watches

1 Answer

Analogue display does not sync with digital


Go to the Casio web site. Download the manual for the watch. Go to the section called "To Adjust the Analog Time." The answer is there, step by step.

Sep 22, 2008 | Casio G-Shock GW500A-1V Wrist Watch

Not finding what you are looking for?
Tissot T-Touch T33159851 Wrist Watch Logo

764 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tissot Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Wayne Winkler
Wayne Winkler

Level 2 Expert

86 Answers

Vernon Taylor

Level 3 Expert

2031 Answers

Are you a Tissot Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...