Question about RCA Onkyo Ht-r670 7.1ch Receiver From The Ht-6200 Set

1 Answer

HDMI ports CB/SAT and Aux do not work on HT-R670

Have not been able to use blue Ray player or other devises Only two ports appear to be working normally. the TV out and the VCR Port work fine but others I get no signal reading. I am currently using the VCR port to watch cable or Blue Ray by switching the HDMI cable. Any Ideas?

Posted by on

  • 2 more comments 
  • John Bicknas Jan 03, 2013

    Went thru the menu ports were assigned correctly, no change in operation. I have heard about HDMI boards having problmes but thought that the problem would take out all ports and not be selective.

  • Steve K Jan 03, 2013

    You're right, usually it's not just one or two jacks. I looked at the schematics and don't see anything specific to those jacks that would cause your problem. Unfortunately, replacing that board would probably cost you more than the receiver itself. Have you looked in the owner's manual to see if there is a factory reset that can be done? This sometimes fixes some wierd problems.

  • Steve K Jan 03, 2013

    usually you can reset these units by holding down the vcr button and pressing the power button. CLEAR should show up on the display.

  • John Bicknas Jan 05, 2013

    I have done the reset and it had no effect. I believe that the easiest and cheapest way out, is to purchase a new receiver. I am currently looking at one of three Onkyo 606, but worried about the heat problems, The Sony STR-DN 1030, which appears to be best for my setup or the Denon 1916, has more hook ups but does not have the WI-FI as the sony does.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • RCA Master
  • 1,054 Answers

Check your setup menu and make sure that the cbl/sat and aux functions are set to look at the hdmi jack and not another type of input like analog, optical, etc.

Posted on Jan 03, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I connect my Sony soundbar ht-ct 260h to my blu ray player etc, I have no optical port or arc hdmi port,at the moment connected through the audio lead to soundbar & tv ?


hook your dvd player up to the tv via hdmi, then take the optical audio output from you tv to the soundbar. Make sure to enable to audio output jack in the tv setup menu as some manufacturers disable this jack by default.

Mar 30, 2015 | Sony HT-CT260H Soundbar and Wireless...

1 Answer

My blue ray / dvd player surround sound won't stay on when I have it on AUX for the TV. Model # SA-BTT195 (?)


What do you have plugged into the AUX port?
Have you tried HDMI 2 some tvs have a smart link on HDMI 1 that auto wakes the component connected to it but I dont know your situation.

Sep 20, 2014 | Panasonic Televison & Video

1 Answer

Why does my Samsung HT-5400 receiver switch modes automatically?


We are having the same issue for the past few weeks. The system worked fine for a few months before hand. Were you able to get it resolved?

Sep 04, 2012 | Samsung Ht-e5400 5.1 3d Ready Blu-ray Home...

1 Answer

Blu Ray player and dish network sat box both connected to Sony HT-7100DH with HDMI cables. HT-7100DH is then connected to Sony HD TV with HDMI Cable. Blu Ray sound only works if the coax cable is...


Hey my nameis Mike Houston of DISH Network and I see there is a problem with the Sony hometheater system connecting with the DISH receiver. To get the full surroundsound you want there are two different options you can use, the first is to usethe HDMI and connect the RCA cable or you can use the Optical cable for sound.If you have any questions or concerns please e-mail me back; michael.houston@dishnetwork.com.

Jan 03, 2011 | Sony HT-7100DH System

1 Answer

After installation of ps3 and blue -ray disc remote control. tried using remote to turn on and play a dvd dics to no avail nothing works the ps3 player nor the remote does't appear to recognize each other...


Ive had the same problem with mine. I have a universal remote and a blu ray player separately installed on my tv. The only way i was able to play the ps3 without calling geek squad to reconfigure my tv was to unplug the blu ray and put the ps3 in its spot and push watch bluray. It worked great.

Nov 29, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Sharp Aquos 46" HDMI problem


I have a similar problem. The Sharp TV aquos appears to be shutting down my blue ray player and dvd recorder when connected via HDMI. They work fine and never close down when I connect them via the rca cables either single video connection or a composite 3 cable rca lead. I have 3 HDMI inputs on the tv and the problem occurs on all 3. Any suggestions?

Jun 16, 2009 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

Best way to connect new system


After trying several ways, we decided the best picture was to run the blue ray (out) directly to the TV (in) with an HDMI and another HDMI from the sat. box(out) to TV(in), then optical audio from TV (out) to receiver (in). This way you don't have to change channels on the reciever when switching from TV to DVD. Remember that HDMI is one cable that supports audio and video. If you are using all Samsung products and want to use one remote, using the Anynet feature, I think it has to be connected with an HDMI. I'm going to try connecting an HDMI too from the reciever to the TV to see if this feature will work. It does with the Blue Ray.

Nov 21, 2008 | Samsung HT-AS720ST Theater System

1 Answer

Advice on the best way to connect


If your system has hdmi in puts put the blu ray player into it then from hdmi out on system to hdmi in on your tv.Now take a phono lead from tv out put to a input on your system,could be marked "aux,tv,sat".For tv sound set the system to prologic2,blu rays should decode themselves,if not check settings for audio out on player.
hope this helps.
cable guy.

Jun 29, 2008 | Samsung Audio Players & Recorders

Not finding what you are looking for?
RCA Onkyo Ht-r670 7.1ch Receiver From The Ht-6200 Set Logo

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74473 Answers

Gyula Lacz

Level 3 Expert

484 Answers

Are you a RCA Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...