Question about Olympus FE-110 Digital Camera

1 Answer

Fault Display Hello everyone, The problem with my camera is that display doesn't work. Everything else seems to be all right. In fact I can take pictures and upload them in my computer. The screen however is half black and half white and has some almost vertical lines that look like scratches. As a matter of fact the menu or photos are not displayed in the screen and I can't see what I'm shooting. I have never dropped it so I'm sure that the screen is not broken. What I suspect is that it got wet during a storm while it was in my bag. Any ideas how much the replacement of display will possibly cost? Olympus charges for the estimation of cost if I decide that I don't want to repair it. Is there any chance of replacing it on my own, provided that I found a spare part? Many thanks

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 2,985 Answers

Your chances are very slim- As you discovered Charges are made for inspection only -it is some ones time after all- and parts are not usually available. Best bet - Dont waste time and money in shipping, inspection and return. Cut your losses and get a new camera.

Posted on Jun 26, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My display screen doesn't work and the camera turns on but would not turn off

Hello, Sounds like internal malfunction, needs to be checked by service tech.

Dec 16, 2012 | Kodak EASYSHARE M1063 Digital Camera

1 Answer

My display screen doesn't work and the camera turns on but would not turn off

Hello. Do not know the model of your camera, but sounds like system internal error. Try to download the firmware for your model at kodak website listed under support. Be sure to get only the file for your model camera !!!!!

Best Regards, Russell

Dec 16, 2012 | Kodak Cameras

1 Answer

Lcd display only works flat against camera

The ribbon wire from the display to the system board has cracked causing intermittent operation when moved. Depending on the wire configuration to the screen will decide if the screen must be replaced or the ribbon wire.

Apr 02, 2012 | Video Cameras

1 Answer

Hello.. my screen is black.. everything seems to work execpt the display

If the pictures can be seen by reviewing the card on your PC then it is possible that the LCD has failed. It can be failure of the backlight circuit, the flexible strip to the LCD or the LCD by itself.
Please take an estimate before you proceed to replace.

Jul 05, 2011 | Canon PowerShot SD790 IS/ IXUS 90 IS...

1 Answer

I dropped my Nikon D 60 and now I get nothing on the LED display. Everything else seems to work.

The display circuitry is compromised, and possibly the screen. I suggest a camera technician to check out your system with an estimate.

Jan 10, 2011 | Nikon D60 Digital Camera

1 Answer

I have the boss BR-900CD and everything seems to work fine but nothing shows up on the screen. It lights up but no data shows up. Thanks


the problem is from the display IC of your unit. You nee to change the display IC for your unit to display again.

If you cannot do it yourself, maybe you should consult an expert to help you have it fixed.

Good luck.

May 13, 2010 | Music

1 Answer

Display not working

if shutter is working it is the dfective CCD so replace the CCD.

Apr 03, 2010 | Kodak EasyShare C533 Digital Camera

1 Answer

Camera turns on , have no display to take pics and cannot review

CCD FAILURE ! Call HP they may or may not repair it FREE but other camera manufacturers are doing it FREE repairs bcoz it is considered as manufac fault in CCD units Pls RATE ME WELL !

Jun 11, 2009 | HP Photosmart M425 Digital Camera

1 Answer

OEL Display not Working on my Pioneer DEH-P7800MP

go to search for (deh-p7800mp ribbon) face paate ribbon is probably bad i got one fixed it right up.

Jun 01, 2009 | Pioneer DEH-P7800MP

Not finding what you are looking for?
Olympus FE-110 Digital Camera Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Olympus Cameras Experts


Level 3 Expert

102366 Answers


Level 2 Expert

359 Answers

Steven Wander
Steven Wander

Level 3 Expert

593 Answers

Are you an Olympus Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides