Question about Medline Industries MDS2001: Automatic Digital Upper Arm Blood Pressure Monitor

1 Answer

I have a medline b/p cuff model #MDS2001 and i get an ERR 3 on the screen. What does that mean

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 50 Answers

The cuff sensor must be placed directly over the vain. This takes a little practice

Posted on Feb 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is an error code 7?


On this model of SpO2 monitor from Medline, the "err 7" means the sensor has reached its end of life functionality... Basically it means it is time to buy another SpO2 monitor. I have a dozen of these in a rehab facility and have to swap them out every couple of years when I get this error code. I found this out a few years ago from Medline Support. This is why the warranty is 2 years (works out well that way, don't you think?). Hope that helps out some.. sorry for the bad news...Thanks!Stan Skaggs

Oct 13, 2014 | Medline HCSFSATSPORT: FingerSAT Sport...

1 Answer

Error 7


On this model of SpO2 monitor from Medline, the "err 7" means the sensor has reached its end of life functionality... Basically it means it is time to buy another SpO2 monitor. I have a dozen of these in a rehab facility and have to swap them out every couple of years when I get this error code. I found this out a few years ago from Medline Support. This is why the warranty is 2 years (works out well that way, don't you think?).
Hope that helps out some.. sorry for the bad news...

Thanks!
Stan Skaggs

Apr 20, 2014 | Medline HCSFSATSPORT: FingerSAT Sport...

1 Answer

Err code 3


From manual at pag.3:
err code 3Appears when pressure value did not increase during cuff inflation: 1) cuff is not fastened 2) air connector is not connected properlMake sure cuff tube is properly connected to monitor, cuff is securely fastened and exhaust rate is between 2 mmHg and 5 mmHg. Make sure air connector is inserted properly into tube and monitor.
refer to manual

Mar 05, 2012 | Lifesource UA 767 Plus Digital Blood...

1 Answer

Good Afternoon, Regarding your Medline Certified Sphygmomanometers, Aneriod, and your model Accurcare MDS9400, can you tell me what the recommended PM schedule would be for this device? Thank you.


You'll need to get that information directly from Medline, the manufacturer.

If you live in the US call 800-633-5463

In Canada call 800-396-6996

In Mexico call 01-800-0898

Mar 17, 2011 | Medline Industries Medline Manual Digital...

1 Answer

Digital wrist model # SR303S, shows error 3, has new batteries


Possible explanations and work-arounds based on various blood pressure monitors..net is if it has worked religiously like mine had and this error comes up, and the simple fixes below do not work, there is something internally wrong with the unit..there does not seem to be any customer reset or obvious fixes..contact the manufacturer for service..

Error Description Potential cause and remedy

«Err 3» No pressure in the cuff
An adequate pressure cannot be generated in the cuff. A leak
may have occurred. Replace the batteries if necessary. Repeat the
measurement.

---------------------------------------
Error Codes

Err 0 No pulse is detected
Err 1 Inflation rate is too low
Err 2 Systolic reading unattainable
Err 3 Cuff pressure is too high
Err 4 Diastolic pressure is outside of operation range
Err 5 Cuff deflated too fast
Err 6 Cuff deflated too slow
Err 7 Systolic pressure is outside of operation range
Err 8 Overall pressure is outside of operation range
Err 9 Cuff is unable to inflate to the necessary pressure level
--------------------------------------
Error No. Possible cause(s)
Err 1 No pulse has been detected. Cuff may be positioned incorrectly.
Err 2 The arm was moved during the measurement.
Err 3 Inflation of the cuff took too long. The cuff is not positioned correctly.

Jan 04, 2011 | Samsung Blood Pressure Monitors

2 Answers

Walgreens HD303 Blood Pressure Monitor error 3


Possible explanations and work-arounds based on various blood pressure monitors..net is if it has worked religiously like mine had and this error comes up, and the simple fixes below do not work, there is something internally wrong with the unit..there does not seem to be any customer reset or obvious fixes..

Error Description Potential cause and remedy

«Err 3» No pressure in the cuff
An adequate pressure cannot be generated in the cuff. A leak
may have occurred. Replace the batteries if necessary. Repeat the
measurement.

---------------------------------------
Error Codes

Err 0 No pulse is detected
Err 1 Inflation rate is too low
Err 2 Systolic reading unattainable
Err 3 Cuff pressure is too high
Err 4 Diastolic pressure is outside of operation range
Err 5 Cuff deflated too fast
Err 6 Cuff deflated too slow
Err 7 Systolic pressure is outside of operation range
Err 8 Overall pressure is outside of operation range
Err 9 Cuff is unable to inflate to the necessary pressure level
--------------------------------------
Error No. Possible cause(s)
Err 1 No pulse has been detected. Cuff may be positioned incorrectly.
Err 2 The arm was moved during the measurement.
Err 3 Inflation of the cuff took too long. The cuff is not positioned correctly.

Apr 08, 2010 | Walgreens Wrist Blood Pressure Monitor

1 Answer

Sphygmomanometer


most likely when you dropped it on the concrete floor the compact of it hitting the floor has either jarred something on the inside of it and has caused it to not work properly or find the papers to the machine and restart the directions for it. i hope that something i have said may work, good luck!

Jan 07, 2009 | Medline Industries Medline Manual Digital...

Not finding what you are looking for?
Medline Industries MDS2001: Automatic Digital Upper Arm Blood Pressure Monitor Logo

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Medline Industries Blood Pressure Monitors Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68180 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Medline Industries Blood Pressure Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...