Question about JVC Everio GZ-MG70 Camcorder

1 Answer

Focus probles JVC HDD Camcorder

I have this hard disc camcorder, and the infinity focus is out of focus, But as I zoom in the subject is in focus. When it is at it wides focus point it nothing is in focus. I have never drooped this unit I have treated it with the up most care. I have done a complete rest and went back to all factory defalts. Please I need help....I have a child on the way and I do not what him to be out of focus. Than you. John

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 60 Answers

Hi, The problem with your cam can be of improper lens assembly which made the lens to park un an unsuitable location at both end and hence focus cannot be achieved.. please give to nearest service centre immediately if it is under warranty.. all the best my friend sreejith

Posted on Jul 12, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

No focus when zooming in

from the Manuel
? When the zoom speed is high, the subject may not be focused easily.
Also you Focus could be not set on auto which thinks the subject is either closer or father away from the camera.
Here is the Manuel for reference.

May 05, 2011 | Panasonic SDR-H80 Hard Drive Camcorder

1 Answer

While recording the Camcorder goes in and out of focus. If I keep the camcorder running and either zoom or pan out the subject refocuses, but if i hold at that level of focus the subject becomes blurry...

It sounds like you are either too close to the subject or you need to flip the focus switch to automatic.
The Auto/Manual focus button is located on the left side of the camcorder under the LCD monitor flap.
Other than that, does this happen only in low light? The camera will have trouble focusing in low light usually.

Mar 01, 2011 | Panasonic SDR-H40 HDD Camcorder

1 Answer

Just need a manual foor Nikon One.Touch Zoom 90s

Description: Sleek and stylish, the exciting new Nikon One-Touch Zoom 90QD offers real zoom power in a lightweight, easy-to-use design. The One-Touch Zoom 90QD has a sharp, clear, 2.5x zoom lens with a 38-90mm range and a macro mode for shots as close as 11 inches. The One-Touch Zoom 90QD features a built-in automatic flash with five versatile modes (auto flash, anytime flash, flash cancel, slow sync and red-eye reduction). The active infrared autofocus, infinity focus (for landscapes and faraway subjects), real-image zoom viewfinder and fully automatic exposure control all help to ensure clear and balanced photos.

7444ca6.jpg Depth 2.1 in. Film Type 35mm Width 4.6 in. Height 2.5 in. UPC 018208018789 Battery Type 1 x 3V Lithium Battery (CR-2) Weight 7.84 oz. Self Timer Yes Camera Type Point and Shoot Focus Type Autofocus Minimum Focus Distance 1 ft. ISO Range - Automatic Setting ISO 100 - 800 Red Eye Reduction With Red Eye Reduction Zoom Size 2.4 Auto Exposure Yes Min Aperture f10.5 Waterproof No Max Aperture f4.8 Zoom Lens With Zoom Lens Zoom Range 38 mm - 90 mm

User Manual can not be found up to now. Very soon will be available.

Jan 26, 2010 | Nikon One Touch Zoom 90S 35mm Point and...

1 Answer

Lens for Nikon D60

I will try to help you, but please understand that my experience is with Nikon film cameras. Assuming that the D60 works in a manner similar to a Nikon 35 mm body and that Sigma macro lens work like Nikon macro lens, you should be able to determine the usable subject to lens distance by experimentation. First, make sure the lens is in the macro mode. To do this you must set the auto-focus mode control to the manual focus mode (see your manual). On Nikon lenses, you must first set the focus ring to infinity, then move slider switch, which has two positions marked; "normal" and "macro., to the macro position. You should now be able to rotate the focus ring to the macro range. Use the zoom ring to zoom in and out and focus with the focus ring. The the range over which the lens to subject to lens distance will yield an in focus image will be rather limited and in the range of an inch or so to 6 or 8 inches.

Dec 09, 2008 | Cameras

1 Answer

JVC Enverio GZ-MG155 30gb camcorder

Try removing the battery and see if it changes back to the default settings.

Aug 04, 2008 | JVC Everio GZ-MG130 Camcorder

1 Answer

Losing focus

Usually this is a back focus problem; also called a flange back adjustment.  If the back focus adjustment is possible on this camera, zoom out wide - open iris all the way - and adjust focus and lock position.

Nov 06, 2007 | Sony Handycam DCR-VX2100 Mini DV Digital...

4 Answers

P72 face focus blurry background

Hl, I'm not sure what shooting options the P72 has. But, even in Auto you should be able to do this (Auto usually picks a wide aperture). The key is to fill the frame (at least 50%) with your subject. So zoom in and focus on the face and then while 1/2 pressing, zoom back out a little. Then fire away. You should get an in-focus subject and slight blurring of the BG. You have to experiment with this. If you fill the frame too much, you might get such a small depth of field that the subject's nose is in-focus but the eyes aren't.

Sep 13, 2005 | Sony Cyber-Shot DSC-P72 Digital Camera

1 Answer

IESP auto focus

iESP is the default auto focus setting for the C-8080 Wide Zoom camera. It uses a contrast detecting system to analyze the entire image by comparing the subject against the background to achieve focus. When the shutter button is pressed half way on the C-8080 Wide Zoom, the AF target mark automatically moves to an area of the image where it finds the optimal contrast.

Sep 04, 2005 | Olympus Camedia C-8080 Wide Zoom Digital...

1 Answer

The minimum focusing distance

Shooting can be performed at a minimum focusing distance of 3cm. An approximate 2.1 cm x 2.8 cm subject can be captured on the monitor.

Sep 04, 2005 | Olympus Camedia C-5060 Wide Zoom Digital...

1 Answer

IESP auto focus

iESP is the default auto focus setting for the C-5060 Wide Zoom camera. It uses a contrast detecting system, to analyze the entire image by comparing the subject against the background to achieve focus. When the shutter button is pressed half way on the C-5060 Wide Zoom, the AF target zone automatically moves the to an area of the image where it finds the optimal contrast.

Sep 04, 2005 | Olympus Camedia C-5060 Wide Zoom Digital...

Not finding what you are looking for?
JVC Everio GZ-MG70 Camcorder Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Video Cameras Experts


Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Larry Stiles
Larry Stiles

Level 2 Expert

287 Answers

Are you a JVC Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides