Question about Casio Sea-Pathfinder SPF40-1V Wrist Watch

1 Answer

How do you change battery on casio 1346 module watch, I notice in back of watch there are six slot.

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Harbor Freight sells a low cost watch wrench but in a Robinson Crusoe situation you can CAREFULLY use square nosed needle nose pliers(Lowes or The Home Depot won't object if you try out one of theirs); hold watch in wash cloth to protect your hand, put the square blades in the watch back indentations and slowly turn with maximum pressure, after it opens use a quality Japan Maxell SR621W silver oxide, do NOT use a China alkaline version as they leak and have less run time. Use a Q-Tip with light Vaseline around the sealing edges when reassembling. Sincerely batteryBob

Posted on Nov 19, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Teraz
  • 50 Answers

SOURCE: watch problem

take out the battery and clean under it and the area it is supposed to be settled in.Clean with rubbing alcohol.

Posted on Jun 27, 2007

  • 1 Answer

SOURCE: Casio spf 40 Module 2273

Your Watch is in Auto or demo mode. Hold down the "Mode" button for 3 - 5 seconds and it will return to time keeping mode.

Cheers,
Murray

Posted on Dec 29, 2007

  • 1 Answer

SOURCE: Casio module 2273 battery change

did u ever figure out how to get the retaining clip?

Posted on Mar 13, 2010

mcdevito75
  • 1970 Answers

SOURCE: My Casio watch Battery was just changed now I can

mcdevito75 here, Return to where the battery was changed, for adjustments.

Posted on Jul 12, 2010

  • 1 Answer

SOURCE: Casio 1170 ATC-1200 watch needs to have batteries changed

I'll post in case somebody still needs this. This is the general procedure to switch the ATC 1200 from meters to feet. You can also switch the ATC 1200 (1170) from C to F. This is very helpful if you change the batteries and the watch gets reset to meters.

Also note, when you pull out the two batteries, you may not get the watch to come up. This is because of a race condition when the watch gets power. To fix this, look for the AC mark on the inside of the watch. Under this marking, in a little space to the left, are two copper pads. Short this out with a small screw driver to get the watch to ground zero.

To fix the Metric measurements:

1. Go to the home screen on the watch. This is when the the 3 letter abbr for the day is at the top. Also, if you cycle the mode button, it is the screen where the final beep is "high."

2. Then press the "memory" button, which will take the home display to the data screen. This shows current time, pressure and temperature.

3. Hold down the adjust button, until the set screen comes up.

4. Tab the mode/select button on the watch until you get a flashing C. Then press the memory button to toggle to F.

You can adjust all the measurements from this screen.

Posted on Dec 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a casio pathfinder model 2273 and the light went out. I changed the batteries, but still no luck. Everything else seems to work just fine.


Hi Jennifer

Two possibiities here one is electronic, unlikely but possible, and one mechanical that you can check.

When you changed the batteries did you notice internally the location of the button that turns the back light on? If you pressed the light button, did the button or a spindle move forward towards the body of the watch? did you notice a contact? or nothing pressed against anything?

When changing the batteries you would have click open the battery holding frame. This frame or internal back plate has around the light button a little piece of metal, like a finger that gets pressed by the button towards a contact in the body of the watch. This finger suffers metal fatigue and quite often looses its springiness or snaps altogether and loses it ability to make contact between the frame and the EL plate that illuminates the back of the watch.
If you are missing this contact perhaps you could buy a replacement plate from Casio. Can not advise as to the costs of doing it yourself or sending it to Casio. It is fiddly job.
Hope this helps

Nov 27, 2016 | Casio Watches

2 Answers

I need O-ring seal for CASIO 1346 water resistant (from year 2001). Where I can bought it please?


Bring it to a watch repairman, or into a watches/jewelery store to order it.
You also can try to order online through Casio website (Many watch company's websites only sell replacement parts through watches/jewelery stores or repairmen, not to individual.)

Feb 19, 2011 | Casio Watches

1 Answer

I had to change the battery, however, now I can't set the correct time. I need a print out!


Hi, If you don't have the manual, Try this link:
http://world.casio.com/wat/download/en/manual/

Take the four-digit module number from the back of the watch, enter it, and download a PDF of your watch setting-instructions/manual.
I hope this helps you. Thanks, Bill

Sep 07, 2010 | Casio GShock Illuminator watch

1 Answer

I replaced all four batteries and i still have nothing .inside the watch it says to jumper the A C point with a twizers. what is the AC point and where.this s a casio 2271 2years old had factory batteries...


Casio battery changes are quite tricky.If you look closely at the watch module there is a place for the battery and a v-small depression usually circular on the silver module .There will be the letters AC in small writing.You need to touch the depression AC and the battery at the same time with a conductive tweezers.This shorts the module and re sets the watch.Make sure any seals go back in to protect from water/dust.
Regards

Aug 13, 2010 | Casio PRG-40T-7 Pathfinder

2 Answers

My Casio watch Battery was just changed now I can


mcdevito75 here, Return to where the battery was changed, for adjustments.

Jul 12, 2010 | Casio Watches

1 Answer

How to restart my casio module no 2271 watch


mcdevito75 here, I'm figureing you"ve changed the battery, Pressing the MODE button should re-start your watch. If you didn"t change the battery and your watch just stopped, try pressing the MODE or any button to re-start the watch. If nothing, change the battery and repeat the above instructions.

Jun 23, 2010 | Casio PRG-40T-7 Pathfinder

1 Answer

Changing the battery on My Casio Watch module 1848. Two tiny coil springs fell out. Where do they go? I reassembled the watch where i think they belong, and face is blank.


The contact springs most likely have nothing to do with your screen being black.
The watch will have an "AC" or all clear function that needs to be performed. Check the back lid for AC or reset instructions. If there are no instructions there then you will have to visit a watch repairman/technician to have this procedure performed as it involves touching the AC pad on the circuit board to the back of the battery already installed. The circuit board is easily damaged if not performed properly.

Sep 16, 2009 | Watches

1 Answer

My six-month old Casio watch (Module No. 3054) fogs over when the humidity is high so that I can't read the time.


Take it back, the battery must have been changed sometime when it was in the store, and the back has not been sealed correctly. If the store won't take it back I would send to the company. If you don't want to do that, take it to a reputable watchmaker ( NOT A JWEWLER) and have them check out the seal, and how well the back was put on. If you have anymore questions, please feel free to ask. Good Luck!!

Aug 09, 2008 | Casio Watches

1 Answer

Casio 81cs-36 watch


Use this page to download a copy of CASIO watch manuals in PDF format. To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.

http://world.casio.com/wat/download/en/manual/


You will need a pdf reader on your pc, you will find all instructions in there.

May 02, 2008 | Casio Black Casual Sports Watch W7521AV...

8 Answers

CASIO PAG-40 Keeps good time but buttons stopped working


open the backside.
probably the light switch contact at the six side of the watch (attached to the steel mainframe) may have contact with the electronic cirquit

Jan 13, 2008 | Casio PRG-40T-7 Pathfinder

Not finding what you are looking for?
Casio Sea-Pathfinder SPF40-1V Wrist Watch Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Jimmy Accardi

Level 2 Expert

101 Answers

k24674

Level 3 Expert

7993 Answers

Are you a Casio Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...