How to replace internal fuse for nad 370 amp

6ya staff

• 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

6ya - Get Instant Help

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

SOURCE: NAD 370

Hi There is no circuit breakers inside. close to front panel on a left side under plastic cover is fuse (AGC type) . Before you change fuse look at four filter capacitors in the middle of unit!!! (close to power transformer on pcb) If they are white do not change the fuse and get unit to good service center( it must be someone who knows what they doing!!!) If the caps are different color (black ,purple) you can try to change fuse. Once again if capacitors are white do not use unit-fire hazard!!!! I'm long time service guy for NAD so trust me on this one Dariusz  dariusz70@verizon.net

Posted on Feb 13, 2008

Scott Frye

• 1175 Answers

SOURCE: NAD C270 amp won't switch from red power/protection to green.

The AH may denote "slo-blo" style as opposed to Fast-acting
A fast-acting fuse will look like a single strand of wire ( maybe wiggly looking) ..A Slo-blo will have an element in it and a spring

Posted on Apr 11, 2009

Grubhead

• 5362 Answers

SOURCE: my nad amp wont turn on - i've checked plug fuse so it must be something inside - was told it might not be worth fixing but i wuld like toknow what it is so i can at least decide. it's only 2 years ol

Yes it could be the internal fuse. If your lucky it might have just failed on it's own!

Posted on Jun 02, 2009

Grubhead

• 5362 Answers

SOURCE: nad c 370 no power

You need to look inside. There will be a fuse inside too. If your lucky it will restore the amp once replaced, but if it blows again you have a fault. You can track it down yourself if your any good, you might even see a burnt out part when looking for that fuse, otherwise get the repairman in.

Posted on Sep 25, 2009