Question about Airlink (APSUSB2) Print Server

1 Answer

I need To install on Mac - Airlink (APSUSB2) Print Server

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 150 Answers

Try the software located at this page:
http://www.airlink101.com/support/index.php?cmd=files&id=32
If PS stands for Postscript as I think it does, then these will be compatible with Mac. Try the PS Wizard software, the 3rd down in the list.

Please rate, Thanks!

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a tplink PS310U MFC print server. I have managed to connect using a PC but there is no software for the Mac OS X. I am running Yosemite and can connect to the server for printing. However I can


Hi
If you can't scan then it sounds as if your computer doesn't have the appropriate driver installed for scanning. There are a lot of drivers and other downloads here:
Printers
including a scanner driver for MAC OS 10.3 to 10.7. Since Yosemite is 10.10, I don't know if this would work for you, but I think it your most promising solution.
It may be worth disconnecting the printer and connecting it directly to the computer. If it scans and prints when directly connected then it is likely that the print server is causing the problem and if as you say there is no Mac software for it you may be in a no-win situation. The fact that you can print through it however does mean there is hope, because I have found this page which is described as manual installation of the server on Mac OS here
FAQ ID 347 How to install Print Server manually on MAC OS
but the OS is 10.6.4 so, I'm not sure.
Not as helpful as I had hoped but perhaps you can get something from this screed

Dec 17, 2014 | TP-LINK ACCESSORY TL-PS310U SINGLE...

1 Answer

Connect hp c6380 copier to iPad


If you are using a Mac and the printer is connected to it is should work right off the bat with AirPrint. If you are on a Windows computer you'll have to install http://jaxov.com/2010/11/download-airprint-installer-for-windows-7-xp-vista/.

Also there should be an HP app in the app store that might help you out as well if you don't want to install an application on your computer.

Sep 01, 2011 | HP Print Servers

2 Answers

Since updating to Apple OS X Lion I cannot print using my Xerox 6200DP


Have you updated the Printer Driver for OS X.

Try uninstalling the existing Driver and reinstall a new one from the link below.

http://www.support.xerox.com/support/phaser-6200/downloads/enus.html?operatingSystem=macosx&fileLanguage=en


If you need any further assistance then please just ask.

Aug 19, 2011 | Xerox Print Servers

2 Answers

I cannot find a driver or SW package for Windows 7.


I have the same problem. This is what Tripp Lite told me: "We have tested the existing drivers for the US-4A on both Windows 7 and Mac OS 10.6.2. Neither Windows7 nor Mac OS 10.6.2 functioned with the USB server products (US-4A and U2S-2A) while utilizing current drivers. I suspect that this is due to the fact that both OS' appear to have undertaken a major overhaul over their prior counterparts (XP, Vista, 10.5.X). In order for functionality to exist between the operating systems (in this case Win 7 and Mac OS 10.6.X) new drivers would need to be released. At this point, there is no plan to move forward with drivers to accommodate these operating systems."

I told them I was not impressed and that this lack of support would affect any future purchases of thier products.

Mar 27, 2010 | Keyspan USB Server US-4A (d47710) Print...

1 Answer

Can not install


Chapter 3 - Configuration
This section will show you how to configure your new D-Link wireless print server using the web-based configuration
utility.
Web-based Configuration Utility
The IP address of your print server will be automatically assigned by your router.
To access the print server’s web-based configuration interface:
Windows® XP users:
Double-click on the My Network Places icon on your desktop. Your print server will be displayed as “DPR-1260:
dlinkps-xxxxxx” (where xxxxxx is the last 6 characters of your print server’s MAC address). If you do not see the print
server or have UPnP enabled, please refer to page 13.
Windows® 2000 users:
You will need to write down the MAC address located on the bottom of the print server (E.G. 00-54-23-45-f5-b6). Open
a web browser and enter the following:
http://dlinkps-XXXXXX
XXXXXX = the last six characters of your MAC address.
Note: Some printer software features may not work
while connected to the print server such as ink level display.

This will prove the print server is working. If you can not access the web interface then it may not be getting an address from the router

May 22, 2009 | D-Link RangeBooster G DPR-1260 (DPR1260)...

3 Answers

Wireless printer connection with at&t u-verse


OK I FINALLY figured out how to fix this. You need to program your router to allow your printer to connect to it. Do this by going to your 2Wire router setting homepage by entering http://192.168.1.254 in your address bar. Now sross to the bottom and click wireless. Go down to MAC Filtering and click Edit Blocked/Allowed Device List. You need your printers MAC address now. You can get this by turning your printer on and press the button that has a check mark on it. It will print out a report page. Your MAC address should be called the hardware address and should be 12 digits. Now go back to your computer and enter this address in the form xx.xx.xx.xx.xx.xx where it says MAC address and click add to list. You might need to enter your password now mich should be on a sticker on the bottom of your router. Voila! Now make sure you have uninstalled the HP software from your previous install attempts if you have any, and turn off your firewall. (Control panel--security---turn off firewall) Now use the provided HP install disk and follow the instructions. Click install a wireless printer. It will not find it now but thats okay. When it asks what type of connection you want to have click wireless. Now select the basic setup where you connect an ethernet cable to your printer and router. Now connect the printer and router with the ethernet cable. Now click refresh. It should find it now. You'll need to select your network name and enter your WPA network key (located on the bottom of the router if you didnt change it). It should find it now!! Remember to turn your firewall back on! Happy printing!!

Aug 18, 2008 | D-Link Air Plus DP-G310 (dpg-310) Print...

3 Answers

Netgear Wireless Print Server WGPS606 won't install correctly


I finally got my WGPS606 installed - unfortunately, it's just on one computer so far, but that computer is on the network and is not wired. Here are a few tips:

1. hold the reset button (little pinhole) until you see some action going on with the lights (I forget exactly what happened, but after a while there was a change) - this served to "reset" my WGPS606's IP Address, which I had changed during setup.

2. connect your computer to the server with an ethernet cable and type in http://192.168.0.102 (the default IP Address of the server)

3. login with the default username and password:
username: admin
password: password

4. once logged in, you will see all of the WGPS606's information. At that point, you should be able to change the IP Address of the server to what you want it to be, but I think you can proceed to run the setup on the installation CD (or the installation program from the WGPS606's Netgear website) and it should be recognized on the wireless network.

In my case, I want to mention that when the initial setup failed for me, I used the MAC address on the back of the server. After steps 1-4, my server was finally on the wireless network by the installation program, however, the MAC address was 1 digit off from what was on the server. The MAC address on the back of the server was the PHYSICAL MAC address, whereas the WIRELESS MAC address was one digit higher (last set of numbers. For instance, on the back of the server, the MAC address ended in ":01" and I found out that this was the physical MAC address. The wireless MAC address was exactly the same, except the last 2 digits were ":02."

Another thing to note was that after the server was recognized, it told me to reserve a specific IP Address other than what I had previously set - I didn't realize that it chose it for you. Anyway, just keep that in mind. After this, everything worked like a charm - well, I have yet to set up the other computers to connect to the server, but at least I have one!

Hope this helps!

Jan 11, 2008 | NetGear WGPS606 (WGPS606NAR) Print Server

Not finding what you are looking for?
Airlink (APSUSB2) Print Server Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Airlink Print Servers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Are you an Airlink Print Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...