Question about Washing Machines

1 Answer

Mah8700ww maytag washer no lights on board pluged in

Pluged in power to plug no power to machine though

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you are looking for a control board for that model let me know I have two working boards.

Posted on Mar 15, 2014

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 619 Answers

SOURCE: Maytag washer not reset after power outage

The magnetic switch was stuck due to power outage / contactor are spark connect the contactor stuck together .Magnetic switch to replace.

Posted on Jan 09, 2008

  • 112 Answers

SOURCE: NO power or dead control board with maytag washer mah9700aww

Are you getting power at the wall plug? Test it with a lamp or nitelite. GFI are made to protect people and need to be tested annualy by the button on the plug. You also have to reset it by the plug or circuit breaker. If the washer is on the same circuit as something else that uses high current it may too much current for the circuit. It use to be that we could not wash clothes and use the microwave so I moved the microwave.

Posted on Aug 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a Neptune Maytag frontload washer. The door is open but the lock mechanism is locked so cannot shut the door. Is there a code for this??


try un pluging washer for 15min and plug back in to see if it resets. if not u may need new latch but first make sure u don't have a loose wire to lock

Apr 06, 2014 | Maytag Neptune Washing Machines

1 Answer

Maytag model MFW9600SQO had a power outage ,now constant alarm and no lights on front


The main control board has gone out and will need to be replaced. All of the newer washers, and dryers that have the electronics need to have a surge protector on them. Here is the control board to order.

Nov 02, 2012 | Washing Machines

1 Answer

NO power or dead control board with maytag washer mah9700aww


Are you getting power at the wall plug? Test it with a lamp or nitelite. GFI are made to protect people and need to be tested annualy by the button on the plug. You also have to reset it by the plug or circuit breaker. If the washer is on the same circuit as something else that uses high current it may too much current for the circuit. It use to be that we could not wash clothes and use the microwave so I moved the microwave.

Aug 12, 2009 | Maytag Washing Machines

1 Answer

Maytag-Neptune stopped part way though cycle. Error code 0E shows on LCD panel. Powering down does not reset. I can't enter service mode as described in the washer manual the 0E code remains.


In general this error code is the main control.

Resetting by pulling out the plug may help, but I wouldn't count on it.

This would require a new main control board.

May 14, 2009 | Washing Machines

1 Answer

Control panel lights


try unpluging and let it sit then plug back in but iof that doesnt work as long as its not 5yrs old and puirchased before 06 board and panel should be under warranty parts only though not labor

Mar 30, 2009 | Maytag Neptune FAV6800AW Top Load Washer

2 Answers

My Neptune washer MAH9700


I have a Maytag Neptune MAH 9700. It died one day and the door remained locked. I am guessing the circuit board is fried so it's a good thing I purchased a five year extended warranty. The problem though, is that my 2 year olds BLANKY was in there and she won't go to bed without it. Can't wait 2 weeks for the repair guy. I was able to remove the top and (after I unplugged it of course) get my hand to the bottom of the switch housing. Seems there is a small opening at the bottom. I pressed up with my finger and was able to get the door opened. Whew!!! Hope this helps. ; )

Jan 10, 2008 | Maytag Neptune MAH9700 Front Load Washer

1 Answer

Maytag washer not reset after power outage


The magnetic switch was stuck due to power outage / contactor are spark connect the contactor stuck together .Magnetic switch to replace.

Jan 09, 2008 | Maytag Atlantis MAV6000 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...