Question about Sewing Machines
I turned the machine off and now it will not turn back on at all i tried removing power cord to different outlet and even unplugged it from sewing machine and repluggin it but nothing works please help asap
It's possible that the power cord has gone out
or the on and off switch
or the motor
Posted on Jan 03, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
My experience follows: If operating system is Windows Vista go to Singer Futura web site and down load a patch. Make sure you read and get the right one...This worked for me on one computer operating Vista...However, my laptop that is operating on Windows 7 and doesnt have the patch yet...from what I have read it is in the works waiting to be approved by Microsoft - Very Frustrating!
Posted on Jan 01, 2010
So here's what I did and it worked for me. Somehow the WinDriver that is on the software is uninstalling itself and needs to be listed with the drivers for Jungo for this software to work. I installed the software when I first got the machine with no problems, then suddenly I couldn't open it and was receiving the same connection error. When you go to http://www.futura-support.com/faq/machine.htm#2 to install the drivers, you'll notice their screen shot shows both the CLEM driver and the WinDriver. Check your machine following their instructions to see if you have both listed under the Jungo driver. If not, go to http://www.jungo.com/st/windriver_usb_pci_driver_development_software.html and select the link under "Available WinDriver Toolkits" for your operating systems (I selected WinDriver USB for Windows). It asks a bunch of questions which I didn't know the answer to so I selected "other" on almost everything then entered "NA"or "?" for the other description. Select Download now and it will need to restart your computer. Once done, I looked at the device manager again and now WinDriver is listed under Jungo and CLEM and the software opens, no problems.
This will at least temporarily solve the issue, however, it's a free trial which means the download will expire at some point. Good news is, the windriver is on the futura disk, I just don't know why it's not installing or staying on the machine. I am sending all of this to Singer to figure out what they're missing in the installation files and hopefully get a fix permanently.
Posted on Mar 13, 2009
newtosinger, you got a very strange answer. Updates with 64bit Vista/XP and Windows 7 platforms support will be released for all Futura models, just due to higher demand updates for newer machine models are released first. So far updates exist for models ce150/250/350 and ses1000/2000. In a few days will be released an update for ce100/200 that use software 184.108.40.206-220.127.116.11. After that will be released an update for older software versions Futura 1.0.0.x (ce100) and 2.0.0.x (ce200/200E)
Posted on Jan 22, 2010
Tips for a great answer:
May 10, 2017 | Singer Sewing Machines
Nov 22, 2016 | Singer Sewing Machines
Jul 08, 2016 | Singer Futura Xl-400 All-In-One Sewing And...
Feb 06, 2016 | Singer Futura XL-400 Quartet 4-in-1 Sewing...
Feb 11, 2015 | Singer Sewing Machines
Jul 01, 2014 | Singer Futura Xl-400 All-In-One Sewing And...
Jun 11, 2014 | Singer Sewing Machines
Oct 22, 2013 | Singer Futura Xl-400 All-In-One Sewing And...
Jun 08, 2007 | Singer CE-200 Quantum Futura Computerized...
683 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: