Question about Minolta EP4000/5000 CS/PRO Copier

1 Answer

Minolta ep4000 error code c0400

Hello, I presently use minolta EP4000 and it is showing me error code EP0400. Can someone help me out and also provide me with the Service Manual so i can handle other codes problems.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Minolta Master
  • 1,294 Answers

C0400 -Exposure lamp failure to turn ON
C0410 -Exposure lamp turning on at abnormal timing
Turn OFF the copier,remove the glass,Work a screwdriver trough the hole in the frame at the left front side of the copier and remove the screw that secures the scanner unit.Move the scanner to rhe right hand side of the copier.Remove 3 screws to free the scanner.(To remove the scanner turn it counterclockwise).Remove 1 screw and the wire guide,remove 1 screw and the ground wire.Unplug the exposure lamp terminal connector,unplug the thermal fuse connector.Remove the scanner from the copier.Verify the continuity of the exposure lamp and thermal fuser.If is defective change.

Posted on Jan 29, 2013

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 628 Answers

SOURCE: minolta Ep4000 show CodeM2 /code 00040

This is just a message shown when counter is reached for preventive maintenace. If everything is working fine, u can just ignore it.

Posted on Mar 29, 2009

  • 15 Answers

SOURCE: minolta Ep4000 show CodeM2

Set the copier into Tech. Rep. mode by pressing the following keys in this order : utilty meter count stop 0 stop 1 then from the menu select counter then select Maintenance select the conter then enter anew value from the 10-Key pad

Posted on Apr 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mesin fotocopy


The C0400 deals with the scanning lamp not turning ON. I would check the fuse for the scanning lamp and check the lamp to see if it is blown. You will most likely need to replace one or both of the parts. Good Luck

Oct 30, 2013 | Minolta EP4000/5000 CS/PRO Copier

1 Answer

Error code 040


I think you will find this is error code c0400 this issue if the code i am giving you is correct is a fault with the exposure lamp you can test the lamp for cont using a digital meter if the lamp turns out to be ok there is a fault with the ae sensor board on pwb-h you would need to replace this board

Jan 22, 2011 | Minolta EP4000/5000 CS/PRO Copier

1 Answer

Problem c0400 for Minolta


Exposure lamp to reset open front door to your upper left remove the access cover press the trouble reset, if the code comes back replace the bright light under the big glass

Oct 31, 2010 | Minolta EP4000/5000 CS/PRO Copier

3 Answers

Code C0400 contact rep at certain phone #...# out of service.


c0400 is exhaust fan code. Open the front door to clear. Make also all covers are closed front and both sides.

Jul 02, 2009 | Minolta EP4000/5000 CS/PRO Copier

1 Answer

Minolta Ep4000 show CodeM2


Set the copier into Tech. Rep. mode by pressing the following keys in this order : utilty meter count stop 0 stop 1 then from the menu select counter then select Maintenance select the conter then enter anew value from the 10-Key pad

Mar 29, 2009 | Minolta EP4000/5000 CS/PRO Copier

1 Answer

Minolta ep4000 sorter bin is stuck. code is


how to solve cob60 error in minolita 3000

Feb 17, 2009 | Canon imageRUNNER C3200 Copier

1 Answer

Minolta EP4000 Error C0b62


Hello sir;that's sorter bin problem, check the sorter bins see anyone out of track not move otherwise shift motor defect.

Jan 08, 2009 | Minolta EP4000/5000 CS/PRO Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...